'Bug#2420: X-server crash: after suspend on Dell CPi D266XT laptop'

[prev in list] [next in list] [prev in thread] [next in thread] 

List:       kde-bugs-dist
Subject:    Bug#2420: X-server crash: after suspend on Dell CPi D266XT laptop
From:       Thomas Hantke <Thomas.Hantke () zonnet ! nl>
Date:       1999-12-14 11:19:08
[Download RAW message or body]

Dear KDE developpers,

1) after a suspend of my Dell laptop, X-windows has crashed. I include
'startx', 'XF86Config' and the server output ('X.err.crash'). I run Suse
6.2

2) The error file .X.err was growing in an endless loop.

3) My desktop is now 'damaged', i.e. I have only 2 virtuel screens
(instead of 4),
   also the titles of the screens (Desk 1, Desk 2, ...) have
disappeared.

Thomas Hantke
["XF86Config" (application/octet-stream)]
["startx" (application/octet-stream)]
["X.err.crash" (text/plain)]

XFree86 Version 3.3.4 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 13 1999
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF] 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000, ET4000W32,
      ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p,
      ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
      ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10,
      wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202,
      sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530,
      sis620, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
      tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
      tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
      tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
      cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
      blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
      ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
      video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
      s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
      NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
      ct64200, ct64300, mediagx, V1000, V2x00, p9100, spc8110, i740,
      i740_pci, Voodoo Banshee, Voodoo3, generic
(using VT number 7)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) SVGA: Graphics device ID: "Primary Card"
(**) SVGA: Monitor ID: "Primary Monitor"
(**) FontPath set to \
"/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/ \
X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/f \
onts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
 (--) SVGA: PCI: NeoMagic NM2160 rev 1, Memory @ 0xe1000000, 0xfde00000
(--) SVGA: chipset:  NM2160
(--) SVGA: videoram: 2048k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 90.000 MHz
(**) SVGA: Mode "1024x768": mode clock =  85.000
(**) SVGA: Mode "800x600": mode clock =  60.750
(**) SVGA: Mode "640x480": mode clock =  36.000
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: NeoMagic MagicGraph 128XD (NM2160) chip
(--) SVGA: NM2160: Panel is a 1024x768 color TFT display
(--) SVGA: NM2160: Internal LCD only display mode
(--) SVGA: NM2160: Video modes are displayed in the upper-left corner
(--) SVGA: NM2160: Low resolution video modes are stretched
(--) SVGA: NM2160: MMIO registers at 0xFDE00000
(--) SVGA: NM2160: Linear framebuffer at 0xE1000000
(--) SVGA: NM2160: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE imagetext, TE polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
+ test -z /usr/lib/qt
+ test -z /opt/kde
+ echo /home/thomas/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/openwin/bin:/ \
usr/lib/java/bin:/var/lib/dosemu:/usr/games/bin:/usr/games:/opt/gnome/bin:/opt/kde/bin:.
 + grep kde/bin
+ test 0 = 0
+ test -n ''
+ export LD_LIBRARY_PATH=/opt/kde/lib
+ LD_LIBRARY_PATH=/opt/kde/lib
+ startifaudio kaudioserver
++ grep -A1 'Audio devices' /dev/sndstat
++ tail -n 1
grep: /dev/sndstat: No such device
+ TESTVAR=
+ test -n ''
+ startifaudio kwmsound
++ grep -A1 'Audio devices' /dev/sndstat
++ tail -n 1
grep: /dev/sndstat: No such device
+ TESTVAR=
+ test -n ''
+ startifthere kfm -d
+ type -p kfm
+ test 0 -eq 0
+ echo -n 'Starting kfm -d...'
Starting kfm -d...+ echo Done.
Done.
+ startifthere kcontrol -init
+ type -p kcontrol
+ test 0 -eq 0
+ echo -n 'Starting kcontrol -init...'
Starting kcontrol -init...+ echo Done.
Done.
+ startifthere kbgndwm
+ type -p kbgndwm
+ test 0 -eq 0
+ echo -n 'Starting kbgndwm...'
Starting kbgndwm...+ kfm -d
+ echo Done.
Done.
+ startifthere krootwm
+ type -p krootwm
+ test 0 -eq 0
+ echo -n 'Starting krootwm...'
Starting krootwm...+ kcontrol -init
+ echo Done.
Done.
+ kbgndwm
+ startifthere kpanel
+ type -p kpanel
+ test 0 -eq 0
+ echo -n 'Starting kpanel...'
Starting kpanel...+ krootwm
+ echo Done.
Done.
+ create_default_desktop
+ '[' '!' -d /home/thomas/Desktop ']'
+ mkdir -p /home/thomas/.skel
+ kpanel
+ diff /home/thomas/.skel/kbase /etc/SuSE-release
+ exec kwm
Some pixmaps are not valid: GimmickMode dissabled
KCharset: Wrong charset!

KCharset: Wrong charset!

kwm: X_ConfigureWindow(0xc00192): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x340005d): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc001cd): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2c0006d): BadMatch (invalid parameter attributes)
kwm: X_SetInputFocus(0x2c00022): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc002dd): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2c0006d): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc0041f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2c00022): BadMatch (invalid parameter attributes)
KCharset: Wrong charset!

KCharset: Wrong charset!

kmix: Could not open mixer.
Perhaps you have no permission to access the mixer device.
Login as root and do a 'chmod a+rw /dev/mixer*' to allow the access.
/opt/kde/bin/kmorph3d.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
                open shared object file: No such file or directory
/opt/kde/bin/kpipes.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
                open shared object file: No such file or directory
/opt/kde/bin/kspace.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
open shared object file: No such file or directory PID could not get read.
event 16 wants sound (none)
kmix: Could not open mixer.
Perhaps you have no permission to access the mixer device.
Login as root and do a 'chmod a+rw /dev/mixer*' to allow the access.
kwm: X_ConfigureWindow(0xc004be): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c0007f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc004be): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c0007f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc004be): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c0007f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc004e9): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c001a2): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00518): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c00076): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00668): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c00173): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00742): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4800029): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00900): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x540005b): BadMatch (invalid parameter attributes)
KCharset: Wrong charset!

/opt/kde/bin/kmorph3d.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
                open shared object file: No such file or directory
/opt/kde/bin/kpipes.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
                open shared object file: No such file or directory
/opt/kde/bin/kspace.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
open shared object file: No such file or directory Some pixmaps are not valid: \
GimmickMode dissabled Desktop background found in cache
Desktop background found in cache
Desktop background found in cache
Desktop background found in cache
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00f18): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c00119): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc0001f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2400013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00bca): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc0079b): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x5000444): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00bca): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00279): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2801106): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00bca): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00bca): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4c00013): BadMatch (invalid parameter attributes)
KCharset: Wrong charset!

KCharset: Wrong charset!

Desktop background found in cache
kwm: X_ConfigureWindow(0xc0001f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2400013): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc010bd): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4000013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00442): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3800013): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc010ac): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc010bd): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4000013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00279): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2801106): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00bca): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00442): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3800013): BadMatch (invalid parameter attributes)
Desktop background found in cache
Desktop background found in cache
kwm: X_ConfigureWindow(0xc010bd): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4000013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc0079b): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x5000444): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc010ac): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc0079b): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x5000444): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc0079b): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x5000444): BadMatch (invalid parameter attributes)
KCharset: Wrong charset!

KCharset: Wrong charset!

KCharset: Wrong charset!

KCharset: Wrong charset!

KCharset: Wrong charset!

Desktop background found in cache
kwm: X_ConfigureWindow(0xc01147): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2c0000d): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc01c99): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2c0019d): BadMatch (invalid parameter attributes)
QGDict::look: Attempt to insert null item

Fatal server error:
WaitForSomething(): select: errno=22


When reporting a problem related to a server crash, please send
the full server output, not just the last messages

X11 Error!
xinit:  connection to X server lost.
Xlib: sequence lost (0xe0000 > 0xd25a8) in reply type 0x0!
kwm: <unknown>(0xbfffd435): 0
kwm: <unknown>(0xbfffd435): 0
kwm: <unknown>(0xbfffd435): 0
kwm: <unknown>(0xbfffd435): 0
kwm: <unknown>(0xbfffd435): 0
kwm: <unknown>(0xbfffd435): 0

(endlessly repeated...deleted TH~~)


["rc.config" (text/plain)]

#
# /etc/rc.config
#
# Copyright (c) 1996,98 SuSE GmbH Nuernberg, Germany.  All rights reserved.
#
# Author: Florian La Roche <florian@suse.de>, 1996
#         Werner Fink <werner@suse.de>, 1996
#         Burchard Steinbild <bs@suse.de>, 1996
#
# Configuration database for shell scripts in /sbin/init.d, /sbin/SuSEconfig 
# and /etc/cron.daily/aaa_base
#
# Please edit this file and execute /sbin/SuSEconfig to configure everything.
# Also don't forget to edit the following files:
#       - /etc/lilo.conf
#       - /etc/fstab
#       - /etc/profile
#       - /etc/hosts
#

#
# Which language should be used by YaST
#
LANGUAGE="english"

#
# Some people don't want SuSEconfig to modify the system. With this
# entry you can disable SuSEconfig completely. 
# Please don't contact our support if you have trouble configuring your 
# system after having disabled SuSEconfig.  (yes/no)
#
ENABLE_SUSECONFIG=yes

#
# This variable will get local users as their $LANG variable.
# $LANG is the default of all $LC_*-variables, as long as
# $LC_ALL is not set, which overrules all $LC_-variables.
# If empty, LANGUAGE will be used.
#
# Setting this variable for the root user is controlled by the
# variable ROOT_USES_LANG.
#
RC_LANG=""

#
# This varible will get local users as their $LC_ALL variable.
# Setting this variable also for daemons and the root user
# is controlled by the variables INIT_SCRIPT_USE_LANG and 
# ROOT_USES_LANG.
# If it is set, it overrules all $LC_-variables incl. $LANG
#
RC_LC_ALL=""

#
# This defines the locale in which messages of programs and
# libraries with i18n-support should appear if a translated
# message catalog for the library or the program is installed.
# It also defines yes/no answers which are defined by the locale.
#
RC_LC_MESSAGES=""

#
# This defines the locale for character handling and classification.
# The locale defined here is used by the libc in functions which
# are used to qualify if this character is an charcater which may
# be used in an text string, if the character is e.g. lowercase
# and it defnes upper/lowercase-mapping of foreign characters
#
RC_LC_CTYPE=""

#
# This defines the locale for sorting strings and characters.
# The locale defined here is used by the libc in functions which
# are used to qualify if a character is befor or beyond an other
# character in the alphabet. Note: sort(1) doesn't use these
# functions, but other application such as databases may use it.
#
RC_LC_COLLATE=""

#
# This defines the locale for formatting date and time output.
# i.e.: 06/09/1999 vs. 09.06.1999
#
RC_LC_TIME=""

#
# This defines the locale for formatting and reading numbers.
# i.e.: 1,234.56 vs. 1.234,56
#
RC_LC_NUMERIC=""

#
# This defines the locale for formatting and reading money values.
#
RC_LC_MONETARY=""

#
# This defines if the user "root" should use the locale settings
# which are defined here.
#
ROOT_USES_LANG="no"

#
# SuSEconfig can mail reports (created by YaST or included in packages)
# to you.  Here you can set the address.  If you don't want it, simply
# set it to "".
#
MAIL_REPORTS_TO="root"

#
# There are two levels of mailing.  If you set MAIL_LEVEL it to "warn"
# you only get the important mails.  If you set it to "all", you get
# logs also.
#
MAIL_LEVEL="warn"

#
# Which device is the mouse ? (e.g. "/dev/ttyS0")
#
MOUSE="/dev/psaux"

#
# Which device is the modem ? (e.g. "/dev/cua1")
#
MODEM="/dev/ttyS1"

#
# keytable and console font
# (e.g. "de-latin1-nodeadkeys" for KEYTABLE, empty for US settings)
#
KEYTABLE="us.map.gz"

#
# what font for console shall be loaded?
#
CONSOLE_FONT=""

#
# does your console font need a screenmap. so add it to CONSOLE_SCREENMAP.
#
CONSOLE_SCREENMAP=""

#
# some fonts/keymap need a unicode map (TRANSLATION in former releases).
# add it to CONSOLE_UNICODEMAP.
#
CONSOLE_UNICODEMAP=""

#
# for some fonts the console has to be initialized with CONSOLE_MAGIC.
# CONSOLE_MAGIC can be empty or have the values "(B", ")B", "(K" or ")K".
#
CONSOLE_MAGIC=""


#
# keyboard repeat rate (2.0 - 30.0)
# keyboard delay time in ms (250, 500, 750, 1000)
# (you have to set both, if "kbdrate" should be called)
#
KBD_RATE=""
KBD_DELAY=""

#
# NumLock on? ("yes" or "no")
KBD_NUMLOCK="no"

#
# CapsLock on? ("yes" or "no")
KBD_CAPSLOCK="no"

#
# tty's for NumLock and CapsLock 
# example: "tty1 tty2"
# "" for all tty's
#
KBD_TTY="tty1 tty2 tty3 tty4 tty5 tty6"


#
# Set to "-u" if your system clock is set to GMT, otherwise "".
#
GMT=""

#
# Timezone (e.g. CET)
# (this will set /usr/lib/zoneinfo/localtime)
#
TIMEZONE="MET"

#
# start loopback networking? ("yes" or "no")
#
START_LOOPBACK="yes"

#
# networking
#
# number of network cards: "_0" for one, "_0 _1 _2 _3" for four cards
#
NETCONFIG=""

#
# IP Adresses
#
IPADDR_0="192.168.0.99"
IPADDR_1=""
IPADDR_2=""
IPADDR_3=""

#
# network device names (e.g. "eth0")
#
NETDEV_0="eth0"
NETDEV_1=""
NETDEV_2=""
NETDEV_3=""

#
# parameteres for ifconfig, if you put "bootp" into it, bootp will
# be used to configure it
# sample entry for ethernet:
# IFCONFIG_0="192.168.81.38 broadcast 192.168.81.63 netmask 255.255.255.224"
#
IFCONFIG_0="192.168.0.99 broadcast 192.168.0.255 netmask 255.255.255.0 up"
IFCONFIG_1=""
IFCONFIG_2=""
IFCONFIG_3=""

# 
# setup dummy network device for IPADDR_0? this is useful for non permanent
# network connections (e.g. SLIP, PPP). Some software needs a connection
# to FQHOSTNAME (e.g. plp). (yes, no)
SETUPDUMMYDEV=yes

#
# Do you want the "dynamic IP patch" to be enabled at bootup? (yes/no)
#
IP_DYNIP=no

#
# Enable syn flood protection (see /usr/src/linux/Documentation/Configure.help)
# (yes/no)
#
IP_TCP_SYNCOOKIES=yes

#
# 2 you can configure at runtime, if the host may forward
# IP packages or not.  Is this host a router? (yes/no)
#
IP_FORWARD=no


#
# SuSEconfig can do some checks and modifications for /etc/hosts. 
# If this is not wanted, set the following variable to 'no' (yes, no).
#
CHECK_ETC_HOSTS=yes

#
# If CHECK_ETC_HOSTS is set to yes, SuSEconfig sorts your
# /etc/hosts.  But in some cases this may be unwanted.  So here is a
# flag, where you can configure if /etc/hosts should be "beautified".
# (yes/no)
#
BEAUTIFY_ETC_HOSTS=yes

#
# if SORT_PASSWD_BY_UID is set to yes, SuSEconfig sorts your /etc/passwd
# and /etc/group by uid/gid.
#
SORT_PASSWD_BY_UID=no


#
# hostname of the system (full name)
# if zero, and bootp is used above, bootp will also set the hostname
# (e.g. "riemann.suse.de" or "hugo.linux.de")
# don't forget to also edit /etc/hosts for your system
#
FQHOSTNAME="lemming.zonnet.nl"

#
# SuSEconfig can create and check the /etc/host.conf for you. Should this
# be done ("yes" or "no").
#
CREATE_HOSTCONF="yes"

#
# Shall SuSEconfig maintain /etc/resolv.conf (needed for DNS) ? 
# If set to yes and one of SEARCHLIST and NAMESERVER is empty,
# it is assumed, that no DNS is wanted and /etc/resolv.conf will
# be deleted. If yes and both are filled out, it will be created.
# "no" simply lets /etc/resolv.conf untouched.
#
CREATE_RESOLVCONF=yes

#
# Should NIS be used for name resolving (yes/no)
#
USE_NIS_FOR_RESOLVING=no

#
# domain searchlist that should be used in /etc/resolv.conf
# (e.g. "suse.de linux.de uni-stuttgart.de")
# Attention! this has to be filled out, if you want to access a name server
#
SEARCHLIST="zonnet.nl domain.zonnet.nl search.zonnet.nl"

#
# space separated list of nameservers that should be used for /etc/resolv.conf
# give a maximum of 3 IP numbers
# (e.g. "192.168.116.11 192.168.7.7")
#
NAMESERVER="212.48.41.3 212.48.41.4"

#
# Used for News-Postings.
#
ORGANIZATION=""

#
# News server.
#
NNTPSERVER="news"

#
# space separated list of irc servers
#
IRCSERVER=""

#
# start the inet daemon in multi-user? ("yes" or "no")
# this is needed, if you have to telnet/rlogin to your own machine.
# It is also needed for the man page formatter in SuSE Help system
# and for starting the plp lp daemon.
#
START_INETD="yes"

#
# have mail daemon on SMTP port? ("yes" or "no")
# needed, if you receive email from other hosts via tcp/ip
# not needed, if you have a uucp-only host or only out-going email.
# If set to "yes", sendmail will be started as daemon.
# As uucp site, you can get along with "SMTP=no", if you make
# a "sendmail -q" call after each poll. (As rmail is queuing the mail only
# and not delivering it...)
#
SMTP="yes"

#
# From:-Line in email and News postings
# (otherwise the FQDN is used)
#
FROM_HEADER="lemming.zonnet.nl"

#
# some programs (e.g. lynx, arena and wget) support proxies, if set in
# environment.  SuSEconfig can add this environment variables to
# /etc/SuSEconfig/* (sourced by /etc/profile etc.) - See
# http://www.suse.de/Support/sdb_e/lynx_proxy.html for more details.
# Example: HTTP_PROXY="http://proxy.provider.de:3128/"
HTTP_PROXY=""

#
# Example: FTP_PROXY="http://proxy.provider.de:3128/"
#
FTP_PROXY=""

#
# Example: GOPHER_PROXY="http://proxy.provider.de:3128/"
#
GOPHER_PROXY=""

#
# Example: NO_PROXY="www.me.de, do.main, localhost"
#
NO_PROXY="localhost"


#
# start kernel daemon? ("yes" or "no")
#
START_KERNELD="yes"

#
# start cron daemon? ("yes" or "no")
# should be left unchanged to the default "yes" entry
#
CRON="yes"

#
# start portmap? ("yes" or "no")
# this is needed, if the NFS server is started or if NIS is used
# Attention! If NFS_SERVER is set to "yes", START_PORTMAP will be
# ignored and portmap will be startet in any case.
#
START_PORTMAP="yes"

#
# should the NFS server be started on this host? ("yes" or "no")
# (needs activated portmapper)
#
NFS_SERVER="no"

#
# should the kernel based NFS server be started on this host
# (instead of the user space version) ? ("yes" or "no")
# THIS NEEDS A 2.1 KERNEL WITH NFSD SUPPORT
#
USE_KERNEL_NFSD="no"

#
# the kernel nfs-server supports multiple server processes 
#
USE_KERNEL_NFSD_NUMBER="4"

#
# should translate server client for userid and goupid be started 
# ("yes" or "no"). Needs to be started on NFS clients.
#
NFS_SERVER_UGID="yes"


#
# should imported NFS be reexported? ("yes" or "no")
#
REEXPORT_NFS="no"

#
# when shutting down routing, all net connection can be closed (not useful
# in all cases).  If CLOSE_CONNECTIONS is set to "true" /sbin/init.d/route
# scans /proc to search for network connections and sends a term signal
# to the processes.
#
CLOSE_CONNECTIONS="false"

#
# start pcnfsd (for PCNFS clients; needs activated portmapper - 
# see man pcnfsd) (yes/no)
#
START_PCNFSD=no

#
# start bwnfsd (pcnfs related) (yes/no)
#
START_BWNFSD=no

#
# pcnfsd and bwnfsd need spool directory for lpd. Set it here.
#
PCNFSD_LPSPOOL=/var/spool/lpd

#
# start rwhod? NOTE: rwhod broadcasts regularly, so dial
# on demand connections (ISDN and/or diald) might be established
# (yes/no)
#
START_RWHOD=no

#
# should gpm be started on this machine? ("yes" or "no")
#
START_GPM="yes"

#
# gpm will be started with these parameters
# it won't be started in runlevel 3 (xdm)
# (example: "-t msc -m /dev/mouse")
#
GPM_PARAM=" -t ps2 -m /dev/mouse"

#
# start routed (for dynamic routing - see man routed) (yes/no)
# ATTENTION:  starting routed causes net traffic every 30 seconds.
# If your host is connected to internet via dial-up it makes absolutely
# no sense to activate it.
#
START_ROUTED=no

#
# start the named (package bind)? You have to configure the named first,
# before you can start it (man named).
#
START_NAMED=no

#
# should updatedb (for locate) be started by cron.daily ("yes" or "no")
#
RUN_UPDATEDB=yes

#
# should mandb and whatis be recreated by cron.daily ("yes" or "no")
#
REINIT_MANDB=yes

#
# updatedb has a parameter "--localuser". it runs the find as this user.
# some people think, its a security hole to run it as root (because you
# can get information about directories you can not read normally). Some
# think its useful to hold all files in the database. If you want full
# information in locate db, set RUN_UPDATEDB_AS=root. If you want security
# use RUN_UPDATEDB_AS=nobody.
#
RUN_UPDATEDB_AS=nobody

#
# uptdatedb normally only scans local harddisks, but can include net paths
# in database as well. If you specify directories here, they will be scanned.
#
UPDATEDB_NETPATHS=""

#
# uptdatedb can skip directories for its database. The following parameter
# says which.
#
UPDATEDB_PRUNEPATHS="/S.u.S.E. /mnt /cdrom /tmp /usr/tmp /var/tmp /var/spool /proc"

#
# search net paths as ? (e.g. nobody)
#
UPDATEDB_NETUSER=""

#
# old corefiles? should they be deleted ("yes" or "no")
# if set to no, cron.daily will tell you, if it finds old core files.
# please note, that this feature needs RUN_UPDATEDB to be set to "yes".
#
DELETE_OLD_CORE=no

#
# how old are 'old' core files? (in days)
#
MAX_DAYS_FOR_CORE=7

#
# should old preformated man pages be deleted (/var/catman)
# (yes/no)
#
DELETE_OLD_CATMAN=yes

#
# How old are OLD preformated man pages for you? (days)
#
CATMAN_ATIME=7


#
# we have a small script to generate usr/info/dir file. This needs perl..
# ("yes" or "no")
#
CREATE_INFO_DIR="yes"

# 
# SuSEconfig can call chkstat to check permissions and ownerships for
# files and directories (using /etc/permissions). 
# Setting to "set" will correct it, "warn" produces warnings, if 
# something strange is found. Disable this feature with "no".
#
CHECK_PERMISSIONS=set

#
# SuSE Linux contains two different configurations for
# chkstat. The differences can be found in /etc/permissions.secure
# and /etc/permissions.easy. If you create your own configuration
# (e.g. permissions.foo), you can enter the extension here as well.
#
# (easy/secure local foo whateveryouwant).
#
PERMISSION_SECURITY="easy local"


#
# How long to store old log files. If set to 0, log files will be untouched.
# The log files below will be checked by cron.daily. The number
# after the name means the minimum size in k, the file has to have, before
# it will be backed up (root gets a mail, if it happens).
#
# /tmp/log_mg.* (1024), /var/log/wtmp (400), /var/log/isdn (4096),
# /var/lib/xdm/xdm-errors (200), /var/spool/uucp/Log (2048),
# /var/spool/uucp/Stats (1024), /var/log/debug (1024), /var/log/warn (1024),
# /var/log/messages (4096), /var/log/xferlog (4096), 
# /local/www/logs/access_log (4096), /local/www/logs/error_log (1024)
# /var/adm/isdn.log (1024), /var/log/isdncalls (1024)
#
MAX_DAYS_FOR_LOG_FILES=365

#
# cron.daily can make backup the rpm database. Set the path here, and
# cron.daily will make backup everytime it is called and the db has
# changed.  This backups are recommended.  If you don not want this
# feature, set it to "".
#
RPMDB_BACKUP_DIR=/var/adm/backup/rpmdb

#
# here you can set the maximum number of backup files for the rpm
# database.
#
MAX_RPMDB_BACKUPS=5

#
# cron.daily can check for old files in tmp-dirs. It will delete all files
# not accessed for more than MAX_DAYS_IN_TMP. If MAX_DAYS_IN_TMP is not set
# or set to 0, this feature will be disabled. 
#
MAX_DAYS_IN_TMP=0

#
# You can specify in TMP_DIRS_TO_CLEAR, which directories have to be 
# searched for old files, to be deleted.
#
TMP_DIRS_TO_CLEAR="/tmp /var/tmp"

#
# In OWNER_TO_KEEP_IN_TMP, you can specify, whoms file shall not be deleted.
#
OWNER_TO_KEEP_IN_TMP="root"

#
# Do you want to have "." in root path?  This is not recommended, but
# many people do prefer it (yes/no).
#
CWD_IN_ROOT_PATH="no"


#
# If you want to allow root logins from other machines, set ROOT_LOGIN_REMOTE
# to "yes". 
#
ROOT_LOGIN_REMOTE="no"


#
# Some packages by SuSE include dynamically linked motif progs as well
# as statically linked (*.SuSE-dynamic resp. *.SuSE-static). SuSEconfig 
# can analyze your system and link the matching program to *.  If you
# set this to "clean", the other binary will be deleted. (no/link/clean)
#
HOW_TO_HANDLE_COMMERCIAL_LIBS=link

#
# SuSEconfig can do some modifications to /etc/inittab.  If you don't want
# this, set CHECK_INITTAB to no.  (yes/no)
#
CHECK_INITTAB=yes

#
# Here you can set the default Display manager (kdm/xdm/console).
# Attention: CHECK_INITTAB has to be set to yes, to activate this feature.
# If DISPLAYMANAGER is set to console, SuSEconfig will not bother you
# with a missing XF86Config.
#
DISPLAYMANAGER=""

#
# Here you can set the default window manager (kde, fvwm, ...)
#
DEFAULT_WM=kde

#
# CONSOLE_SHUTDOWN determines how ctrl-alt-del is handled.
# Attention: CHECK_INITTAB has to be set to yes, to activate this feature.
# (ignore/reboot/halt)
#
CONSOLE_SHUTDOWN=reboot

#
# Should isapnp be used to initialize your PNP at bootup?  (yes/no)
#
START_ISAPNP=yes

#
# Should the Name Switch Caching Daemon be started at bootup?  (yes/no)
#
START_NSCD=yes

umask 022

#
# Attention! This variable PATH is NOT setting the PATH for user or root
# shells. It is only used internally for /sbin/init.d/*, SuSEconfig and 
# cron.daily. Please do NOT change PATH here.
#
PATH=/sbin:/bin:/usr/sbin:/usr/bin


##
## Formating the boot script messages:
##   The boot scripts should use the variables rc_done and rc_fail to
##   symbolize their success.  See /sbin/init.d/skeleton for an example
##   how to use these variables.
##   rc_done_up and rc_failed_up do the same as rc_done and rc_failed
##   but one line above (usefull for starting daemons who talk to user).
##   The variable rc_reset is used by the master resource control script
##   /sbin/init.d/rc to turn off all attributes and switch on the standard
##   character set.
##
##    \033          is just ascii ESC
##    \033[<NUM>G   move to column <NUM>
##    \033[1m       switch bold on
##    \033[31m      switch red on
##    \033[32m      switch green on
##    \033[33m      switch yellow on
##    \033[m        switch color/bold off
##
     rc_done="\033[71G\033[32mdone\033[m"
   rc_failed="\033[71G\033[31m\033[1mfailed\033[m"
  rc_skipped="\033[71G\033[1mskipped\033[m"
  rc_done_up="\033[1A$rc_done"
rc_failed_up="\033[1A$rc_failed"
   rc_unused="\033[71G\033[1munused\033[m"
    rc_reset="\033[m\017"
#
# Should the ATD (at daemon) be started, for the execution of at jobs? (yes/no)
#
START_ATD=yes
#
# Update groff DESC to get page sizes correct? (yes/no)
# 
# If the correct page size isn't found in your printcap
# you can set GROFF_PAGESIZE to the following values
#
#      letter, legal, a4, or b5
#
# supported by both groff *and* ghostscript
#
UPDATE_GROFF_CONF=yes
GROFF_PAGESIZE=
#
# May SuSEconfig modify your perllocal.pod? (yes/no)
#
CREATE_PERLLOCAL_POD="yes"

#
# May SuSEconfig run h2ph when kernelsources have changed
#
GENERATE_PERL_SYSTEM_INCLUDES="yes"

#
# Default loglevel for klogd
#
KERNEL_LOGLEVEL=1

#
# if not empty: parameters for syslogd
# for example SYSLOGD_PARAMS="-r -s my.dom.ain"
#
SYSLOGD_PARAMS=""
#
# Turn on quotas? (yes/no)
#
START_QUOTA="no"
#
# SVGATEXTMODE comes from the package svgatext which allows 
# higher text resolutions (up to 160x60) on SVGA cards.
# The variable contains a valid mode from /etc/TextConfig.
# Please configure this file to suit the needs of your graphics card.
# How to do this is explained in /usr/doc/packages/svgatext.
# Default is "". SVGATextMode will not be started then.
# SVGATextMode resolutions are used in runlevel 1,2,3 and turned off 
# in runlevel s.
#
SVGATEXTMODE=""
#
# Should the Apache httpd be started at bootup? (yes/no)
#
START_HTTPD=yes
#
# The name of the central server for the Online documentation
# This should be a fully qualified host name, e.g. host.domain.top
#
DOC_HOST="lemming.zonnet.nl"

#
# Set this to yes on the central documentation server
# Then the online-help-system indices are automatically adjusted
# and access to the http-rman service is allowed
#
DOC_SERVER="yes"

#
# List auf host/domain patterns for use with /etc/hosts.allow
# access restrictions on http-rman, e.g. ".mydomain.top" to
# allow access from all hosts of domain mydomain.top
#
DOC_ALLOW="LOCAL"

#
# It is important to run faxsetup before setting this to `yes`!!!
#
START_HYLAFAX=no
#
# Start the INN news server? (yes/no)
#
START_INN=no
#
# Shall the IRC-Server ircd be started? (yes/no)
#
START_IRCD="no"
#
# Start printer daemon lpd? (if you use plp, you can also disable it here
# an enable it in /etc/inetd.conf) (yes/no)
#
START_LPD=yes
#
# start samba? ("yes" or "no")
# Windows 95 / NT  -  File- and Printservices
#
START_SMB="yes"
#
# do you want to generate a sendmail-configuration /etc/sendmail.cf from
# parameters given in /etc/rc.config ("yes") or do you want to generate
# your /etc/sendmail.cf yourself ("no") ?
# (you could also use /etc/mail/linux.mc to do so.)
#
SENDMAIL_TYPE="yes"

#
# smarthost - this host gets all outgoing email from us
# normally used for uucp-connected sites or for dialup connections
# use "uucp-dom:server.uucp.com" to deliver all email to "server.uucp.com"
#
SENDMAIL_SMARTHOST=""

#
# sendmail assumes the following space-separated host-names to be
# the local host (this must just be used for names differrent to the
# hostname, for e.g. aliases like www.nowhere.com)
#
SENDMAIL_LOCALHOST="localhost"

#
# do not deliver any email locally, but send all email to another host
# this can just be used with another system that has the same users on it
# and you probably also want to set the FROM_HEADER to the other host
#
SENDMAIL_RELAY=""

#
# with what parameters should sendmail be started?
# normal sites use "-bd -q30m -om". if you set SENDMAIL_EXPENSIVE and you
# have a dialup ISDN connection, you probably want to set this to
# "-bd -om" and run "sendmail -q" from your crontab.
#
SENDMAIL_ARGS="-bd -q30m -om"

#
# sendmail will only queue email in /var/spool/mqueue and will only start
# to deliver it if "sendmail -q" is run
#
SENDMAIL_EXPENSIVE="no"

#
# sendmail will not try to canonify hostnames in your email
# so much less DNS-queries are send
# you probably want to enable this on a SENDMAIL_EXPENSIVE system
#
SENDMAIL_NOCANONIFY="yes"

#
# these domains can additional to the local domains be changed
# in /etc/mail/genericstable
#
SENDMAIL_GENERICS_DOMAIN=""
#
# Should /etc/yp.conf be created automatically? ("yes" or "no")
# If set to yes /etc/passwd and /etc/group will also be checked.
#
CREATE_YP_CONF="yes"

#
# yp-domain, ask the admin of the yp-server.
#
YP_DOMAINNAME=""

#
# YP-Server. Attention! You've to fill in an IP adress, a name or a nick 
# name here. It must be defined in /etc/hosts (case sensitive). 
# DNS does not work with ypbind.
#
YP_SERVER=""
#
# First you have to edit /etc/inittab to remove the comment of
# the line with /sbin/init.d/rx .
# Then RX_XDMCP and RX_RHOST must be set.
# After all set "yes" if you want to have a X terminal
#
START_RX=no

#
# xdm control protocol: "query" or "indirect" or "broadcast"
# For "query" or "indirect" you have to set RX_RHOST
#
RX_XDMCP="broadcast"

#
# xdm host, necessary for RX_XDMCP equal "query" or "indirect"
#
RX_RHOST=

#
# Optional DISPLAY number, e.g. ":1" or ":2" (don't forget `:')
# Default is DISPLAY :0
#
RX_DSP=

#
# Optional color depth of local X server
#
RX_BPP=

#
# Optional class name for naming the resource class name
# in remote xdm-config. Always given:
#   hostname combined with display number dots and colon
#   replaced by underscores.
#
RX_CLASS=

#
# KDM_SHUTDOWN determines who will be able to shutdown the 
# system in kdm. Valid values are: "root", "all", "none", "local",
#
KDM_SHUTDOWN=root

#
# space separated list of users for which icons should be shown in KDM
# if empty, then take system defaults
#
KDM_USERS=""

#
# path of jpeg or xpm image to be shown in the background of kdm
# or background color (color names from /usr/X11R6/lib/X11/rgb.txt)
#
KDM_BACKGROUND=/opt/kde/share/wallpapers/paper01.jpg

#
# title string of kdm, special string HOSTNAME displays name of computer
#
KDM_GREETSTRING=""

#
# Pixmap which appears on the top of a KDE window, do not specify full path
# path name; it will be searched in KDE IconPath; no Gimmick if empty
# just try: "chamelia.xpm"
#
KWM_GIMMICK_PIXMAP=""
#
# SuSEconfig.wm can create a .fvwm2rc, .fvwmrc, .bowmanrc, .fvwm2rc95,
# .mwmrc, .ctwmrc, depending on the installed packages. If
# you want your systemwide wm config files to be updated after install
# / removal of packages set SUSEWM_UPDATE to "yes", otherwise to "no"
#
SUSEWM_UPDATE="yes"

#
# This is the (space separated) list of window managers for which you 
# want to generate the config file. Valid values are: 
#   "fvwm", "fvwm2", "fvwm95", "bowman", "mwm", "ctwm", "kwm", "all".
# Default setting is "all" which is for generating files for all wms.
#
SUSEWM_WM="all"

#
# If you want the look of the windows similar to mwm say "yes" else "no"
# This is only applicable for fvwm derived window managers
# if this variable is empty, the default is "no"
#
SUSEWM_MWM="yes"

#
# Your fvwm2/95 is slow? Don't want small pixmaps in menus? So set 
# SUSEWM_XPM to "no", if pixmaps in menus are wanted set it to "yes", 
# which is the default value. The package 3dpixms has to be installed.
#
SUSEWM_XPM="yes"

#
# These are additional source files always to be included
# when SuSEconfig.wm is running, e.g. a local configuration
#
SUSEWM_ADD=""

#
# If susewm should conform to older versions of susewm, susefvwm or
# fvwm95, set this to "yes". Otherwise to "no"
#
SUSEWM_COMPAT="yes"
#
# Shall the SNiFF+ license managerbe started at boot up ? (yes/no)
# Don't start it when using the evaluation version!
#
START_SNIFF=no


#
# start applixware server axnet? ("yes" or "no")
# changed to 'no' by T.Hantke 26.07.99
START_AXNET="no"
#
# PCMCIA: This variable determines the used chipset. Valid Values are
# "i82365" or "tcic". If it is left empty, pcmcia will not be startet
# at boot up.
#
PCMCIA="i82365"

#
# PCMCIA_PCIC_OPTS - socket driver timing parameters here.
# For more information, look for "PCIC_OPTS" in the PCMCIA-HOWTO.
# You can find it under /usr/doc/packages/pcmcia.
#
PCMCIA_PCIC_OPTS=""

#
# PCMCIA_CORE_OPTS - Put pcmcia_core options here.
# For more information, look for "CORE_OPTS" in the PCMCIA-HOWTO.
# You can find it under /usr/doc/packages/pcmcia.
#
PCMCIA_CORE_OPTS=""

# Set this to native, if you want *real* Multithreading,
# e.g. in combination with SMP-systems

JAVA_THREADS_TYPE="green"

#
# Should PCMCIA service be started at boottime? (yes/no)
#
START_PCMCIA="yes"

#
# start the ypbind daemon for NIS ? ("yes" or "no")
# This entry is ignored if no YP_DOMAINNAME is set.
# In this case, ypbind is not started.
#
START_YPBIND="yes"
#
# start the yp-server?
#
START_YPSERV="no"

#
# start ypxfrd?
# this is only needed on the main yp-server if you also
# have slave yp-servers. it speeds up the transfer of maps
# to the slave servers
#
START_YPXFRD="no"

#
# start yppasswdd?
#
START_YPPASSWDD="no"

#
# YP Source directory for passwd, shadow and group. You could
# give here an different directory as /etc where YP will search
# the source files for the passwd and group tables.
#
YPPWD_SRCDIR=/etc
#
# Start apmd? (yes/no)
#
START_APMD="yes"
#
# Start the MySQL RDBMS ?
#
START_MYSQL="yes"


[prev in list] [next in list] [prev in thread] [next in thread]
Configure | About | News | Add a list | Sponsored by KoreLogic