[prev in list] [next in list] [prev in thread] [next in thread] 

List:       kde-bugs-dist
Subject:    Bug#2420: marked as done (X-server crash: after suspend on Dell CPi D266XT laptop)
From:       owner () bugs ! kde ! org (Stephan Kulow)
Date:       1999-12-14 11:48:00
[Download RAW message or body]

Your message dated Tue, 14 Dec 1999 12:37:35 +0100
with message-id <38562BFF.3E1FC844@kde.org>
and subject line Bug#2420: X-server crash: after suspend on Dell CPi D266XT laptop
has caused the attached bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I'm
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Stephan Kulow
(administrator, KDE bugs database)

Received: (at submit) by bugs.kde.org; 14 Dec 1999 11:24:00 +0000
From Thomas.Hantke@zonnet.nl Tue Dec 14 12:24:00 1999
Received: from [212.48.41.22] ([212.48.41.22]:13016 "EHLO mail.zonnet.nl")
	by max.tat.physik.uni-tuebingen.de with ESMTP id <S742411AbPLNLXs>;
	Tue, 14 Dec 1999 12:23:48 +0100
Received: from zonnet.nl ([212.189.244.139]) by mail.zonnet.nl
          (Netscape Messaging Server 4.05) with ESMTP id FMQA9V03.3SM for
          <submit@bugs.kde.org>; Tue, 14 Dec 1999 12:22:43 +0100 
Sender: thomas
Message-ID: <385627AC.6B577FAF@zonnet.nl>
Date:   Tue, 14 Dec 1999 12:19:08 +0100
From:   Thomas Hantke <Thomas.Hantke@zonnet.nl>
X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.2.10 i686)
X-Accept-Language: en
MIME-Version: 1.0
To:     submit@bugs.kde.org
Subject: X-server crash: after suspend on Dell CPi D266XT laptop
Content-Type: multipart/mixed;
 boundary="------------6EE5CA621F438E6F2C84F131"
Return-Path: <Thomas.Hantke@zonnet.nl>
X-Orcpt: rfc822;submit@bugs.kde.org

This is a multi-part message in MIME format.

Dear KDE developpers,

1) after a suspend of my Dell laptop, X-windows has crashed. I include
'startx', 'XF86Config' and the server output ('X.err.crash'). I run Suse
6.2

2) The error file .X.err was growing in an endless loop.

3) My desktop is now 'damaged', i.e. I have only 2 virtuel screens
(instead of 4),
   also the titles of the screens (Desk 1, Desk 2, ...) have
disappeared.

Thomas Hantke
["XF86Config" (application/octet-stream)]
["startx" (application/octet-stream)]
["X.err.crash" (text/plain)]

XFree86 Version 3.3.4 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 13 1999
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF] 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000, ET4000W32,
      ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p,
      ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
      ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10,
      wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202,
      sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530,
      sis620, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
      tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
      tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
      tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
      cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
      blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
      ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
      video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
      s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
      NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000,
      ct64200, ct64300, mediagx, V1000, V2x00, p9100, spc8110, i740,
      i740_pci, Voodoo Banshee, Voodoo3, generic
(using VT number 7)

XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) SVGA: Graphics device ID: "Primary Card"
(**) SVGA: Monitor ID: "Primary Monitor"
(**) FontPath set to \
"/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/ \
X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/f \
onts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
 (--) SVGA: PCI: NeoMagic NM2160 rev 1, Memory @ 0xe1000000, 0xfde00000
(--) SVGA: chipset:  NM2160
(--) SVGA: videoram: 2048k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 90.000 MHz
(**) SVGA: Mode "1024x768": mode clock =  85.000
(**) SVGA: Mode "800x600": mode clock =  60.750
(**) SVGA: Mode "640x480": mode clock =  36.000
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: NeoMagic MagicGraph 128XD (NM2160) chip
(--) SVGA: NM2160: Panel is a 1024x768 color TFT display
(--) SVGA: NM2160: Internal LCD only display mode
(--) SVGA: NM2160: Video modes are displayed in the upper-left corner
(--) SVGA: NM2160: Low resolution video modes are stretched
(--) SVGA: NM2160: MMIO registers at 0xFDE00000
(--) SVGA: NM2160: Linear framebuffer at 0xE1000000
(--) SVGA: NM2160: Using hardware cursor
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: CPU to screen color expansion (TE imagetext, TE polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
+ test -z /usr/lib/qt
+ test -z /opt/kde
+ echo /home/thomas/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/openwin/bin:/ \
usr/lib/java/bin:/var/lib/dosemu:/usr/games/bin:/usr/games:/opt/gnome/bin:/opt/kde/bin:.
 + grep kde/bin
+ test 0 = 0
+ test -n ''
+ export LD_LIBRARY_PATH=/opt/kde/lib
+ LD_LIBRARY_PATH=/opt/kde/lib
+ startifaudio kaudioserver
++ grep -A1 'Audio devices' /dev/sndstat
++ tail -n 1
grep: /dev/sndstat: No such device
+ TESTVAR=
+ test -n ''
+ startifaudio kwmsound
++ grep -A1 'Audio devices' /dev/sndstat
++ tail -n 1
grep: /dev/sndstat: No such device
+ TESTVAR=
+ test -n ''
+ startifthere kfm -d
+ type -p kfm
+ test 0 -eq 0
+ echo -n 'Starting kfm -d...'
Starting kfm -d...+ echo Done.
Done.
+ startifthere kcontrol -init
+ type -p kcontrol
+ test 0 -eq 0
+ echo -n 'Starting kcontrol -init...'
Starting kcontrol -init...+ echo Done.
Done.
+ startifthere kbgndwm
+ type -p kbgndwm
+ test 0 -eq 0
+ echo -n 'Starting kbgndwm...'
Starting kbgndwm...+ kfm -d
+ echo Done.
Done.
+ startifthere krootwm
+ type -p krootwm
+ test 0 -eq 0
+ echo -n 'Starting krootwm...'
Starting krootwm...+ kcontrol -init
+ echo Done.
Done.
+ kbgndwm
+ startifthere kpanel
+ type -p kpanel
+ test 0 -eq 0
+ echo -n 'Starting kpanel...'
Starting kpanel...+ krootwm
+ echo Done.
Done.
+ create_default_desktop
+ '[' '!' -d /home/thomas/Desktop ']'
+ mkdir -p /home/thomas/.skel
+ kpanel
+ diff /home/thomas/.skel/kbase /etc/SuSE-release
+ exec kwm
Some pixmaps are not valid: GimmickMode dissabled
KCharset: Wrong charset!

KCharset: Wrong charset!

kwm: X_ConfigureWindow(0xc00192): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x340005d): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc001cd): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2c0006d): BadMatch (invalid parameter attributes)
kwm: X_SetInputFocus(0x2c00022): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc002dd): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2c0006d): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc0041f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2c00022): BadMatch (invalid parameter attributes)
KCharset: Wrong charset!

KCharset: Wrong charset!

kmix: Could not open mixer.
Perhaps you have no permission to access the mixer device.
Login as root and do a 'chmod a+rw /dev/mixer*' to allow the access.
/opt/kde/bin/kmorph3d.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
                open shared object file: No such file or directory
/opt/kde/bin/kpipes.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
                open shared object file: No such file or directory
/opt/kde/bin/kspace.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
open shared object file: No such file or directory PID could not get read.
event 16 wants sound (none)
kmix: Could not open mixer.
Perhaps you have no permission to access the mixer device.
Login as root and do a 'chmod a+rw /dev/mixer*' to allow the access.
kwm: X_ConfigureWindow(0xc004be): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c0007f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc004be): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c0007f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc004be): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c0007f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc004e9): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c001a2): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00518): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c00076): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00668): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c00173): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00742): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4800029): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00900): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x540005b): BadMatch (invalid parameter attributes)
KCharset: Wrong charset!

/opt/kde/bin/kmorph3d.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
                open shared object file: No such file or directory
/opt/kde/bin/kpipes.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
                open shared object file: No such file or directory
/opt/kde/bin/kspace.kss: error in loading shared libraries: libMesaGL.so.3: cannot \
open shared object file: No such file or directory Some pixmaps are not valid: \
GimmickMode dissabled Desktop background found in cache
Desktop background found in cache
Desktop background found in cache
Desktop background found in cache
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00f18): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c00119): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc0001f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2400013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00bca): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc0079b): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x5000444): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00bca): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00279): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2801106): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00bca): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00bca): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4c00013): BadMatch (invalid parameter attributes)
KCharset: Wrong charset!

KCharset: Wrong charset!

Desktop background found in cache
kwm: X_ConfigureWindow(0xc0001f): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2400013): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc010bd): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4000013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00442): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3800013): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc010ac): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc010bd): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4000013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00279): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2801106): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc00bca): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc00442): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3800013): BadMatch (invalid parameter attributes)
Desktop background found in cache
Desktop background found in cache
kwm: X_ConfigureWindow(0xc010bd): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x4000013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc0079b): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x5000444): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc010ac): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x3c00013): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc0079b): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x5000444): BadMatch (invalid parameter attributes)
Desktop background found in cache
kwm: X_ConfigureWindow(0xc0079b): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x5000444): BadMatch (invalid parameter attributes)
KCharset: Wrong charset!

KCharset: Wrong charset!

KCharset: Wrong charset!

KCharset: Wrong charset!

KCharset: Wrong charset!

Desktop background found in cache
kwm: X_ConfigureWindow(0xc01147): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2c0000d): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0xc01c99): BadMatch (invalid parameter attributes)
kwm: X_ConfigureWindow(0x2c0019d): BadMatch (invalid parameter attributes)
QGDict::look: Attempt to insert null item

Fatal server error:
WaitForSomething(): select: errno=22


When reporting a problem related to a server crash, please send
the full server output, not just the last messages

X11 Error!
xinit:  connection to X server lost.
Xlib: sequence lost (0xe0000 > 0xd25a8) in reply type 0x0!
kwm: <unknown>(0xbfffd435): 0
kwm: <unknown>(0xbfffd435): 0
kwm: <unknown>(0xbfffd435): 0
kwm: <unknown>(0xbfffd435): 0
kwm: <unknown>(0xbfffd435): 0
kwm: <unknown>(0xbfffd435): 0

(endlessly repeated...deleted TH~~)


["rc.config" (text/plain)]

#
# /etc/rc.config
#
# Copyright (c) 1996,98 SuSE GmbH Nuernberg, Germany.  All rights reserved.
#
# Author: Florian La Roche <florian@suse.de>, 1996
#         Werner Fink <werner@suse.de>, 1996
#         Burchard Steinbild <bs@suse.de>, 1996
#
# Configuration database for shell scripts in /sbin/init.d, /sbin/SuSEconfig 
# and /etc/cron.daily/aaa_base
#
# Please edit this file and execute /sbin/SuSEconfig to configure everything.
# Also don't forget to edit the following files:
#       - /etc/lilo.conf
#       - /etc/fstab
#       - /etc/profile
#       - /etc/hosts
#

#
# Which language should be used by YaST
#
LANGUAGE="english"

#
# Some people don't want SuSEconfig to modify the system. With this
# entry you can disable SuSEconfig completely. 
# Please don't contact our support if you have trouble configuring your 
# system after having disabled SuSEconfig.  (yes/no)
#
ENABLE_SUSECONFIG=yes

#
# This variable will get local users as their $LANG variable.
# $LANG is the default of all $LC_*-variables, as long as
# $LC_ALL is not set, which overrules all $LC_-variables.
# If empty, LANGUAGE will be used.
#
# Setting this variable for the root user is controlled by the
# variable ROOT_USES_LANG.
#
RC_LANG=""

#
# This varible will get local users as their $LC_ALL variable.
# Setting this variable also for daemons and the root user
# is controlled by the variables INIT_SCRIPT_USE_LANG and 
# ROOT_USES_LANG.
# If it is set, it overrules all $LC_-variables incl. $LANG
#
RC_LC_ALL=""

#
# This defines the locale in which messages of programs and
# libraries with i18n-support should appear if a translated
# message catalog for the library or the program is installed.
# It also defines yes/no answers which are defined by the locale.
#
RC_LC_MESSAGES=""

#
# This defines the locale for character handling and classification.
# The locale defined here is used by the libc in functions which
# are used to qualify if this character is an charcater which may
# be used in an text string, if the character is e.g. lowercase
# and it defnes upper/lowercase-mapping of foreign characters
#
RC_LC_CTYPE=""

#
# This defines the locale for sorting strings and characters.
# The locale defined here is used by the libc in functions which
# are used to qualify if a character is befor or beyond an other
# character in the alphabet. Note: sort(1) doesn't use these
# functions, but other application such as databases may use it.
#
RC_LC_COLLATE=""

#
# This defines the locale for formatting date and time output.
# i.e.: 06/09/1999 vs. 09.06.1999
#
RC_LC_TIME=""

#
# This defines the locale for formatting and reading numbers.
# i.e.: 1,234.56 vs. 1.234,56
#
RC_LC_NUMERIC=""

#
# This defines the locale for formatting and reading money values.
#
RC_LC_MONETARY=""

#
# This defines if the user "root" should use the locale settings
# which are defined here.
#
ROOT_USES_LANG="no"

#
# SuSEconfig can mail reports (created by YaST or included in packages)
# to you.  Here you can set the address.  If you don't want it, simply
# set it to "".
#
MAIL_REPORTS_TO="root"

#
# There are two levels of mailing.  If you set MAIL_LEVEL it to "warn"
# you only get the important mails.  If you set it to "all", you get
# logs also.
#
MAIL_LEVEL="warn"

#
# Which device is the mouse ? (e.g. "/dev/ttyS0")
#
MOUSE="/dev/psaux"

#
# Which device is the modem ? (e.g. "/dev/cua1")
#
MODEM="/dev/ttyS1"

#
# keytable and console font
# (e.g. "de-latin1-nodeadkeys" for KEYTABLE, empty for US settings)
#
KEYTABLE="us.map.gz"

#
# what font for console shall be loaded?
#
CONSOLE_FONT=""

#
# does your console font need a screenmap. so add it to CONSOLE_SCREENMAP.
#
CONSOLE_SCREENMAP=""

#
# some fonts/keymap need a unicode map (TRANSLATION in former releases).
# add it to CONSOLE_UNICODEMAP.
#
CONSOLE_UNICODEMAP=""

#
# for some fonts the console has to be initialized with CONSOLE_MAGIC.
# CONSOLE_MAGIC can be empty or have the values "(B", ")B", "(K" or ")K".
#
CONSOLE_MAGIC=""


#
# keyboard repeat rate (2.0 - 30.0)
# keyboard delay time in ms (250, 500, 750, 1000)
# (you have to set both, if "kbdrate" should be called)
#
KBD_RATE=""
KBD_DELAY=""

#
# NumLock on? ("yes" or "no")
KBD_NUMLOCK="no"

#
# CapsLock on? ("yes" or "no")
KBD_CAPSLOCK="no"

#
# tty's for NumLock and CapsLock 
# example: "tty1 tty2"
# "" for all tty's
#
KBD_TTY="tty1 tty2 tty3 tty4 tty5 tty6"


#
# Set to "-u" if your system clock is set to GMT, otherwise "".
#
GMT=""

#
# Timezone (e.g. CET)
# (this will set /usr/lib/zoneinfo/localtime)
#
TIMEZONE="MET"

#
# start loopback networking? ("yes" or "no")
#
START_LOOPBACK="yes"

#
# networking
#
# number of network cards: "_0" for one, "_0 _1 _2 _3" for four cards
#
NETCONFIG=""

#
# IP Adresses
#
IPADDR_0="192.168.0.99"
IPADDR_1=""
IPADDR_2=""
IPADDR_3=""

#
# network device names (e.g. "eth0")
#
NETDEV_0="eth0"
NETDEV_1=""
NETDEV_2=""
NETDEV_3=""

#
# parameteres for ifconfig, if you put "bootp" into it, bootp will
# be used to configure it
# sample entry for ethernet:
# IFCONFIG_0="192.168.81.38 broadcast 192.168.81.63 netmask 255.255.255.224"
#
IFCONFIG_0="192.168.0.99 broadcast 192.168.0.255 netmask 255.255.255.0 up"
IFCONFIG_1=""
IFCONFIG_2=""
IFCONFIG_3=""

# 
# setup dummy network device for IPADDR_0? this is useful for non permanent
# network connections (e.g. SLIP, PPP). Some software needs a connection
# to FQHOSTNAME (e.g. plp). (yes, no)
SETUPDUMMYDEV=yes

#
# Do you want the "dynamic IP patch" to be enabled at bootup? (yes/no)
#
IP_DYNIP=no

#
# Enable syn flood protection (see /usr/src/linux/Documentation/Configure.help)
# (yes/no)
#
IP_TCP_SYNCOOKIES=yes

#
# 2 you can configure at runtime, if the host may forward
# IP packages or not.  Is this host a router? (yes/no)
#
IP_FORWARD=no


#
# SuSEconfig can do some checks and modifications for /etc/hosts. 
# If this is not wanted, set the following variable to 'no' (yes, no).
#
CHECK_ETC_HOSTS=yes

#
# If CHECK_ETC_HOSTS is set to yes, SuSEconfig sorts your
# /etc/hosts.  But in some cases this may be unwanted.  So here is a
# flag, where you can configure if /etc/hosts should be "beautified".
# (yes/no)
#
BEAUTIFY_ETC_HOSTS=yes

#
# if SORT_PASSWD_BY_UID is set to yes, SuSEconfig sorts your /etc/passwd
# and /etc/group by uid/gid.
#
SORT_PASSWD_BY_UID=no


#
# hostname of the system (full name)
# if zero, and bootp is used above, bootp will also set the hostname
# (e.g. "riemann.suse.de" or "hugo.linux.de")
# don't forget to also edit /etc/hosts for your system
#
FQHOSTNAME="lemming.zonnet.nl"

#
# SuSEconfig can create and check the /etc/host.conf for you. Should this
# be done ("yes" or "no").
#
CREATE_HOSTCONF="yes"

#
# Shall SuSEconfig maintain /etc/resolv.conf (needed for DNS) ? 
# If set to yes and one of SEARCHLIST and NAMESERVER is empty,
# it is assumed, that no DNS is wanted and /etc/resolv.conf will
# be deleted. If yes and both are filled out, it will be created.
# "no" simply lets /etc/resolv.conf untouched.
#
CREATE_RESOLVCONF=yes

#
# Should NIS be used for name resolving (yes/no)
#
USE_NIS_FOR_RESOLVING=no

#
# domain searchlist that should be used in /etc/resolv.conf
# (e.g. "suse.de linux.de uni-stuttgart.de")
# Attention! this has to be filled out, if you want to access a name server
#
SEARCHLIST="zonnet.nl domain.zonnet.nl search.zonnet.nl"

#
# space separated list of nameservers that should be used for /etc/resolv.conf
# give a maximum of 3 IP numbers
# (e.g. "192.168.116.11 192.168.7.7")
#
NAMESERVER="212.48.41.3 212.48.41.4"

#
# Used for News-Postings.
#
ORGANIZATION=""

#
# News server.
#
NNTPSERVER="news"

#
# space separated list of irc servers
#
IRCSERVER=""

#
# start the inet daemon in multi-user? ("yes" or "no")
# this is needed, if you have to telnet/rlogin to your own machine.
# It is also needed for the man page formatter in SuSE Help system
# and for starting the plp lp daemon.
#
START_INETD="yes"

#
# have mail daemon on SMTP port? ("yes" or "no")
# needed, if you receive email from other hosts via tcp/ip
# not needed, if you have a uucp-only host or only out-going email.
# If set to "yes", sendmail will be started as daemon.
# As uucp site, you can get along with "SMTP=no", if you make
# a "sendmail -q" call after each poll. (As rmail is queuing the mail only
# and not delivering it...)
#
SMTP="yes"

#
# From:-Line in email and News postings
# (otherwise the FQDN is used)
#
FROM_HEADER="lemming.zonnet.nl"

#
# some programs (e.g. lynx, arena and wget) support proxies, if set in
# environment.  SuSEconfig can add this environment variables to
# /etc/SuSEconfig/* (sourced by /etc/profile etc.) - See
# http://www.suse.de/Support/sdb_e/lynx_proxy.html for more details.
# Example: HTTP_PROXY="http://proxy.provider.de:3128/"
HTTP_PROXY=""

#
# Example: FTP_PROXY="http://proxy.provider.de:3128/"
#
FTP_PROXY=""

#
# Example: GOPHER_PROXY="http://proxy.provider.de:3128/"
#
GOPHER_PROXY=""

#
# Example: NO_PROXY="www.me.de, do.main, localhost"
#
NO_PROXY="localhost"


#
# start kernel daemon? ("yes" or "no")
#
START_KERNELD="yes"

#
# start cron daemon? ("yes" or "no")
# should be left unchanged to the default "yes" entry
#
CRON="yes"

#
# start portmap? ("yes" or "no")
# this is needed, if the NFS server is started or if NIS is used
# Attention! If NFS_SERVER is set to "yes", START_PORTMAP will be
# ignored and portmap will be startet in any case.
#
START_PORTMAP="yes"

#
# should the NFS server be started on this host? ("yes" or "no")
# (needs activated portmapper)
#
NFS_SERVER="no"

#
# should the kernel based NFS server be started on this host
# (instead of the user space version) ? ("yes" or "no")
# THIS NEEDS A 2.1 KERNEL WITH NFSD SUPPORT
#
USE_KERNEL_NFSD="no"

#
# the kernel nfs-server supports multiple server processes 
#
USE_KERNEL_NFSD_NUMBER="4"

#
# should translate server client for userid and goupid be started 
# ("yes" or "no"). Needs to be started on NFS clients.
#
NFS_SERVER_UGID="yes"


#
# should imported NFS be reexported? ("yes" or "no")
#
REEXPORT_NFS="no"

#
# when shutting down routing, all net connection can be closed (not useful
# in all cases).  If CLOSE_CONNECTIONS is set to "true" /sbin/init.d/route
# scans /proc to search for network connections and sends a term signal
# to the processes.
#
CLOSE_CONNECTIONS="false"

#
# start pcnfsd (for PCNFS clients; needs activated portmapper - 
# see man pcnfsd) (yes/no)
#
START_PCNFSD=no

#
# start bwnfsd (pcnfs related) (yes/no)
#
START_BWNFSD=no

#
# pcnfsd and bwnfsd need spool directory for lpd. Set it here.
#
PCNFSD_LPSPOOL=/var/spool/lpd

#
# start rwhod? NOTE: rwhod broadcasts regularly, so dial
# on demand connections (ISDN and/or diald) might be established
# (yes/no)
#
START_RWHOD=no

#
# should gpm be started on this machine? ("yes" or "no")
#
START_GPM="yes"

#
# gpm will be started with these parameters
# it won't be started in runlevel 3 (xdm)
# (example: "-t msc -m /dev/mouse")
#
GPM_PARAM=" -t ps2 -m /dev/mouse"

#
# start routed (for dynamic routing - see man routed) (yes/no)
# ATTENTION:  starting routed causes net traffic every 30 seconds.
# If your host is connected to internet via dial-up it makes absolutely
# no sense to activate it.
#
START_ROUTED=no

#
# start the named (package bind)? You have to configure the named first,
# before you can start it (man named).
#
START_NAMED=no

#
# should updatedb (for locate) be started by cron.daily ("yes" or "no")
#
RUN_UPDATEDB=yes

#
# should mandb and whatis be recreated by cron.daily ("yes" or "no")
#
REINIT_MANDB=yes

#
# updatedb has a parameter "--localuser". it runs the find as this user.
# some people think, its a security hole to run it as root (because you
# can get information about directories you can not read normally). Some
# think its useful to hold all files in the database. If you want full
# information in locate db, set RUN_UPDATEDB_AS=root. If you want security
# use RUN_UPDATEDB_AS=nobody.
#
RUN_UPDATEDB_AS=nobody

#
# uptdatedb normally only scans local harddisks, but can include net paths
# in database as well. If you specify directories here, they will be scanned.
#
UPDATEDB_NETPATHS=""

#
# uptdatedb can skip directories for its database. The following parameter
# says which.
#
UPDATEDB_PRUNEPATHS="/S.u.S.E. /mnt /cdrom /tmp /usr/tmp /var/tmp /var/spool /proc"

#
# search net paths as ? (e.g. nobody)
#
UPDATEDB_NETUSER=""

#
# old corefiles? should they be deleted ("yes" or "no")
# if set to no, cron.daily will tell you, if it finds old core files.
# please note, that this feature needs RUN_UPDATEDB to be set to "yes".
#
DELETE_OLD_CORE=no

#
# how old are 'old' core files? (in days)
#
MAX_DAYS_FOR_CORE=7

#
# should old preformated man pages be deleted (/var/catman)
# (yes/no)
#
DELETE_OLD_CATMAN=yes

#
# How old are OLD preformated man pages for you? (days)
#
CATMAN_ATIME=7


#
# we have a small script to generate usr/info/dir file. This needs perl..
# ("yes" or "no")
#
CREATE_INFO_DIR="yes"

# 
# SuSEconfig can call chkstat to check permissions and ownerships for
# files and directories (using /etc/permissions). 
# Setting to "set" will correct it, "warn" produces warnings, if 
# something strange is found. Disable this feature with "no".
#
CHECK_PERMISSIONS=set

#
# SuSE Linux contains two different configurations for
# chkstat. The differences can be found in /etc/permissions.secure
# and /etc/permissions.easy. If you create your own configuration
# (e.g. permissions.foo), you can enter the extension here as well.
#
# (easy/secure local foo whateveryouwant).
#
PERMISSION_SECURITY="easy local"


#
# How long to store old log files. If set to 0, log files will be untouched.
# The log files below will be checked by cron.daily. The number
# after the name means the minimum size in k, the file has to have, before
# it will be backed up (root gets a mail, if it happens).
#
# /tmp/log_mg.* (1024), /var/log/wtmp (400), /var/log/isdn (4096),
# /var/lib/xdm/xdm-errors (200), /var/spool/uucp/Log (2048),
# /var/spool/uucp/Stats (1024), /var/log/debug (1024), /var/log/warn (1024),
# /var/log/messages (4096), /var/log/xferlog (4096), 
# /local/www/logs/access_log (4096), /local/www/logs/error_log (1024)
# /var/adm/isdn.log (1024), /var/log/isdncalls (1024)
#
MAX_DAYS_FOR_LOG_FILES=365

#
# cron.daily can make backup the rpm database. Set the path here, and
# cron.daily will make backup everytime it is called and the db has
# changed.  This backups are recommended.  If you don not want this
# feature, set it to "".
#
RPMDB_BACKUP_DIR=/var/adm/backup/rpmdb

#
# here you can set the maximum number of backup files for the rpm
# database.
#
MAX_RPMDB_BACKUPS=5

#
# cron.daily can check for old files in tmp-dirs. It will delete all files
# not accessed for more than MAX_DAYS_IN_TMP. If MAX_DAYS_IN_TMP is not set
# or set to 0, this feature will be disabled. 
#
MAX_DAYS_IN_TMP=0

#
# You can specify in TMP_DIRS_TO_CLEAR, which directories have to be 
# searched for old files, to be deleted.
#
TMP_DIRS_TO_CLEAR="/tmp /var/tmp"

#
# In OWNER_TO_KEEP_IN_TMP, you can specify, whoms file shall not be deleted.
#
OWNER_TO_KEEP_IN_TMP="root"

#
# Do you want to have "." in root path?  This is not recommended, but
# many people do prefer it (yes/no).
#
CWD_IN_ROOT_PATH="no"


#
# If you want to allow root logins from other machines, set ROOT_LOGIN_REMOTE
# to "yes". 
#
ROOT_LOGIN_REMOTE="no"


#
# Some packages by SuSE include dynamically linked motif progs as well
# as statically linked (*.SuSE-dynamic resp. *.SuSE-static). SuSEconfig 
# can analyze your system and link the matching program to *.  If you
# set this to "clean", the other binary will be deleted. (no/link/clean)
#
HOW_TO_HANDLE_COMMERCIAL_LIBS=link

#
# SuSEconfig can do some modifications to /etc/inittab.  If you don't want
# this, set CHECK_INITTAB to no.  (yes/no)
#
CHECK_INITTAB=yes

#
# Here you can set the default Display manager (kdm/xdm/console).
# Attention: CHECK_INITTAB has to be set to yes, to activate this feature.
# If DISPLAYMANAGER is set to console, SuSEconfig will not bother you
# with a missing XF86Config.
#
DISPLAYMANAGER=""

#
# Here you can set the default window manager (kde, fvwm, ...)
#
DEFAULT_WM=kde

#
# CONSOLE_SHUTDOWN determines how ctrl-alt-del is handled.
# Attention: CHECK_INITTAB has to be set to yes, to activate this feature.
# (ignore/reboot/halt)
#
CONSOLE_SHUTDOWN=reboot

#
# Should isapnp be used to initialize your PNP at bootup?  (yes/no)
#
START_ISAPNP=yes

#
# Should the Name Switch Caching Daemon be started at bootup?  (yes/no)
#
START_NSCD=yes

umask 022

#
# Attention! This variable PATH is NOT setting the PATH for user or root
# shells. It is only used internally for /sbin/init.d/*, SuSEconfig and 
# cron.daily. Please do NOT change PATH here.
#
PATH=/sbin:/bin:/usr/sbin:/usr/bin


##
## Formating the boot script messages:
##   The boot scripts should use the variables rc_done and rc_fail to
##   symbolize their success.  See /sbin/init.d/skeleton for an example
##   how to use these variables.
##   rc_done_up and rc_failed_up do the same as rc_done and rc_failed
##   but one line above (usefull for starting daemons who talk to user).
##   The variable rc_reset is used by the master resource control script
##   /sbin/init.d/rc to turn off all attributes and switch on the standard
##   character set.
##
##    \033          is just ascii ESC
##    \033[<NUM>G   move to column <NUM>
##    \033[1m       switch bold on
##    \033[31m      switch red on
##    \033[32m      switch green on
##    \033[33m      switch yellow on
##    \033[m        switch color/bold off
##
     rc_done="\033[71G\033[32mdone\033[m"
   rc_failed="\033[71G\033[31m\033[1mfailed\033[m"
  rc_skipped="\033[71G\033[1mskipped\033[m"
  rc_done_up="\033[1A$rc_done"
rc_failed_up="\033[1A$rc_failed"
   rc_unused="\033[71G\033[1munused\033[m"
    rc_reset="\033[m\017"
#
# Should the ATD (at daemon) be started, for the execution of at jobs? (yes/no)
#
START_ATD=yes
#
# Update groff DESC to get page sizes correct? (yes/no)
# 
# If the correct page size isn't found in your printcap
# you can set GROFF_PAGESIZE to the following values
#
#      letter, legal, a4, or b5
#
# supported by both groff *and* ghostscript
#
UPDATE_GROFF_CONF=yes
GROFF_PAGESIZE=
#
# May SuSEconfig modify your perllocal.pod? (yes/no)
#
CREATE_PERLLOCAL_POD="yes"

#
# May SuSEconfig run h2ph when kernelsources have changed
#
GENERATE_PERL_SYSTEM_INCLUDES="yes"

#
# Default loglevel for klogd
#
KERNEL_LOGLEVEL=1

#
# if not empty: parameters for syslogd
# for example SYSLOGD_PARAMS="-r -s my.dom.ain"
#
SYSLOGD_PARAMS=""
#
# Turn on quotas? (yes/no)
#
START_QUOTA="no"
#
# SVGATEXTMODE comes from the package svgatext which allows 
# higher text resolutions (up to 160x60) on SVGA cards.
# The variable contains a valid mode from /etc/TextConfig.
# Please configure this file to suit the needs of your graphics card.
# How to do this is explained in /usr/doc/packages/svgatext.
# Default is "". SVGATextMode will not be started then.
# SVGATextMode resolutions are used in runlevel 1,2,3 and turned off 
# in runlevel s.
#
SVGATEXTMODE=""
#
# Should the Apache httpd be started at bootup? (yes/no)
#
START_HTTPD=yes
#
# The name of the central server for the Online documentation
# This should be a fully qualified host name, e.g. host.domain.top
#
DOC_HOST="lemming.zonnet.nl"

#
# Set this to yes on the central documentation server
# Then the online-help-system indices are automatically adjusted
# and access to the http-rman service is allowed
#
DOC_SERVER="yes"

#
# List auf host/domain patterns for use with /etc/hosts.allow
# access restrictions on http-rman, e.g. ".mydomain.top" to
# allow access from all hosts of domain mydomain.top
#
DOC_ALLOW="LOCAL"

#
# It is important to run faxsetup before setting this to `yes`!!!
#
START_HYLAFAX=no
#
# Start the INN news server? (yes/no)
#
START_INN=no
#
# Shall the IRC-Server ircd be started? (yes/no)
#
START_IRCD="no"
#
# Start printer daemon lpd? (if you use plp, you can also disable it here
# an enable it in /etc/inetd.conf) (yes/no)
#
START_LPD=yes
#
# start samba? ("yes" or "no")
# Windows 95 / NT  -  File- and Printservices
#
START_SMB="yes"
#
# do you want to generate a sendmail-configuration /etc/sendmail.cf from
# parameters given in /etc/rc.config ("yes") or do you want to generate
# your /etc/sendmail.cf yourself ("no") ?
# (you could also use /etc/mail/linux.mc to do so.)
#
SENDMAIL_TYPE="yes"

#
# smarthost - this host gets all outgoing email from us
# normally used for uucp-connected sites or for dialup connections
# use "uucp-dom:server.uucp.com" to deliver all email to "server.uucp.com"
#
SENDMAIL_SMARTHOST=""

#
# sendmail assumes the following space-separated host-names to be
# the local host (this must just be used for names differrent to the
# hostname, for e.g. aliases like www.nowhere.com)
#
SENDMAIL_LOCALHOST="localhost"

#
# do not deliver any email locally, but send all email to another host
# this can just be used with another system that has the same users on it
# and you probably also want to set the FROM_HEADER to the other host
#
SENDMAIL_RELAY=""

#
# with what parameters should sendmail be started?
# normal sites use "-bd -q30m -om". if you set SENDMAIL_EXPENSIVE and you
# have a dialup ISDN connection, you probably want to set this to
# "-bd -om" and run "sendmail -q" from your crontab.
#
SENDMAIL_ARGS="-bd -q30m -om"

#
# sendmail will only queue email in /var/spool/mqueue and will only start
# to deliver it if "sendmail -q" is run
#
SENDMAIL_EXPENSIVE="no"

#
# sendmail will not try to canonify hostnames in your email
# so much less DNS-queries are send
# you probably want to enable this on a SENDMAIL_EXPENSIVE system
#
SENDMAIL_NOCANONIFY="yes"

#
# these domains can additional to the local domains be changed
# in /etc/mail/genericstable
#
SENDMAIL_GENERICS_DOMAIN=""
#
# Should /etc/yp.conf be created automatically? ("yes" or "no")
# If set to yes /etc/passwd and /etc/group will also be checked.
#
CREATE_YP_CONF="yes"

#
# yp-domain, ask the admin of the yp-server.
#
YP_DOMAINNAME=""

#
# YP-Server. Attention! You've to fill in an IP adress, a name or a nick 
# name here. It must be defined in /etc/hosts (case sensitive). 
# DNS does not work with ypbind.
#
YP_SERVER=""
#
# First you have to edit /etc/inittab to remove the comment of
# the line with /sbin/init.d/rx .
# Then RX_XDMCP and RX_RHOST must be set.
# After all set "yes" if you want to have a X terminal
#
START_RX=no

#
# xdm control protocol: "query" or "indirect" or "broadcast"
# For "query" or "indirect" you have to set RX_RHOST
#
RX_XDMCP="broadcast"

#
# xdm host, necessary for RX_XDMCP equal "query" or "indirect"
#
RX_RHOST=

#
# Optional DISPLAY number, e.g. ":1" or ":2" (don't forget `:')
# Default is DISPLAY :0
#
RX_DSP=

#
# Optional color depth of local X server
#
RX_BPP=

#
# Optional class name for naming the resource class name
# in remote xdm-config. Always given:
#   hostname combined with display number dots and colon
#   replaced by underscores.
#
RX_CLASS=

#
# KDM_SHUTDOWN determines who will be able to shutdown the 
# system in kdm. Valid values are: "root", "all", "none", "local",
#
KDM_SHUTDOWN=root

#
# space separated list of users for which icons should be shown in KDM
# if empty, then take system defaults
#
KDM_USERS=""

#
# path of jpeg or xpm image to be shown in the background of kdm
# or background color (color names from /usr/X11R6/lib/X11/rgb.txt)
#
KDM_BACKGROUND=/opt/kde/share/wallpapers/paper01.jpg

#
# title string of kdm, special string HOSTNAME displays name of computer
#
KDM_GREETSTRING=""

#
# Pixmap which appears on the top of a KDE window, do not specify full path
# path name; it will be searched in KDE IconPath; no Gimmick if empty
# just try: "chamelia.xpm"
#
KWM_GIMMICK_PIXMAP=""
#
# SuSEconfig.wm can create a .fvwm2rc, .fvwmrc, .bowmanrc, .fvwm2rc95,
# .mwmrc, .ctwmrc, depending on the installed packages. If
# you want your systemwide wm config files to be updated after install
# / removal of packages set SUSEWM_UPDATE to "yes", otherwise to "no"
#
SUSEWM_UPDATE="yes"

#
# This is the (space separated) list of window managers for which you 
# want to generate the config file. Valid values are: 
#   "fvwm", "fvwm2", "fvwm95", "bowman", "mwm", "ctwm", "kwm", "all".
# Default setting is "all" which is for generating files for all wms.
#
SUSEWM_WM="all"

#
# If you want the look of the windows similar to mwm say "yes" else "no"
# This is only applicable for fvwm derived window managers
# if this variable is empty, the default is "no"
#
SUSEWM_MWM="yes"

#
# Your fvwm2/95 is slow? Don't want small pixmaps in menus? So set 
# SUSEWM_XPM to "no", if pixmaps in menus are wanted set it to "yes", 
# which is the default value. The package 3dpixms has to be installed.
#
SUSEWM_XPM="yes"

#
# These are additional source files always to be included
# when SuSEconfig.wm is running, e.g. a local configuration
#
SUSEWM_ADD=""

#
# If susewm should conform to older versions of susewm, susefvwm or
# fvwm95, set this to "yes". Otherwise to "no"
#
SUSEWM_COMPAT="yes"
#
# Shall the SNiFF+ license managerbe started at boot up ? (yes/no)
# Don't start it when using the evaluation version!
#
START_SNIFF=no


#
# start applixware server axnet? ("yes" or "no")
# changed to 'no' by T.Hantke 26.07.99
START_AXNET="no"
#
# PCMCIA: This variable determines the used chipset. Valid Values are
# "i82365" or "tcic". If it is left empty, pcmcia will not be startet
# at boot up.
#
PCMCIA="i82365"

#
# PCMCIA_PCIC_OPTS - socket driver timing parameters here.
# For more information, look for "PCIC_OPTS" in the PCMCIA-HOWTO.
# You can find it under /usr/doc/packages/pcmcia.
#
PCMCIA_PCIC_OPTS=""

#
# PCMCIA_CORE_OPTS - Put pcmcia_core options here.
# For more information, look for "CORE_OPTS" in the PCMCIA-HOWTO.
# You can find it under /usr/doc/packages/pcmcia.
#
PCMCIA_CORE_OPTS=""

# Set this to native, if you want *real* Multithreading,
# e.g. in combination with SMP-systems

JAVA_THREADS_TYPE="green"

#
# Should PCMCIA service be started at boottime? (yes/no)
#
START_PCMCIA="yes"

#
# start the ypbind daemon for NIS ? ("yes" or "no")
# This entry is ignored if no YP_DOMAINNAME is set.
# In this case, ypbind is not started.
#
START_YPBIND="yes"
#
# start the yp-server?
#
START_YPSERV="no"

#
# start ypxfrd?
# this is only needed on the main yp-server if you also
# have slave yp-servers. it speeds up the transfer of maps
# to the slave servers
#
START_YPXFRD="no"

#
# start yppasswdd?
#
START_YPPASSWDD="no"

#
# YP Source directory for passwd, shadow and group. You could
# give here an different directory as /etc where YP will search
# the source files for the passwd and group tables.
#
YPPWD_SRCDIR=/etc
#
# Start apmd? (yes/no)
#
START_APMD="yes"
#
# Start the MySQL RDBMS ?
#
START_MYSQL="yes"


[prev in list] [next in list] [prev in thread] [next in thread]