[prev in list] [next in list] [prev in thread] [next in thread] 

List:       quagga-dev
Subject:    [quagga-dev 4476] Re: Multipath with OSPF
From:       "Adriano Carvalho" <adriano.carvalho () urbi ! com ! br>
Date:       2006-11-14 18:22:18
Message-ID: 20061114181726.M64064 () urbi ! com ! br
[Download RAW message or body]

> That looks about right.  So you should be getting basic linux ECMP
> behavior.  Check here for more info:
> 
>    http://www.lartc.org/howto/lartc.rpdb.multiple-links.html#AEN298
> 
> If you really want to balance equally over the 2 links, you could
> use teql as discussed here:
> 
>    http://www.lartc.org/howto/lartc.loadshare.html
> 
> But that may jeopardize your reliability, since you would have
> to run OSPF over teql, and it would be difficult to ascertain
> whether each underlying link was up.  But if you can rely
> on kernel link-detect, teql may work fine for you.
> 
> Regards,
> Andy

Andy,

This sounds good..I could use TEQL, but how will ospfd understand the TEQL?
I´ve seen that TEQL just will take the default route (even with 2 defaults
GW´s) and make the multipath. And if ospfd will take off the route (by i.e.,
one link has gone down), and apply ONE gateway (the second is down), TEQL will
understand by the same way ??
If quagga could work together with TEQL, it will be great. What do you think ?

Very thanks for the help, Andy. 

Regards,

-- 
Adriano Carvalho. 
Desenvolvedor do projeto Honeypot-BR 
www.netnix.com.br

_______________________________________________
Quagga-dev mailing list
Quagga-dev@lists.quagga.net
http://lists.quagga.net/mailman/listinfo/quagga-dev
[prev in list] [next in list] [prev in thread] [next in thread]