[prev in list] [next in list] [prev in thread] [next in thread]
List: hylafax
Subject: Can only send coverpage
From: Richard Baldwin <richard.baldwin () mccaw ! com>
Date: 1995-07-31 16:56:00
[Download RAW message or body]
HylaFax v3.0
SS20
Solaris 2.4
ZyXel 1496E (6.14 ROM's)
Central Data SCSI terminal server
Exacom DID line cards
I've run into a problem I can't solve. I have been unable to send my
documents after sending the cover page.
I've used 'sendfax' from the command line with no cover page and still no
help. Next I'll try a 1 -D transmission.
Thanks for any help.
Richard Baldwin
richard.baldwin@mccaw.com
Here's the modem log:
----------------------------------------------
Jul 31 16:34:57.29: [16162]: SESSION BEGIN
Jul 31 16:34:57.35: [16162]: DELAY 2600 ms
Jul 31 16:35:02.28: [16162]: <--
[43:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0]
Jul 31 16:35:02.58: [16162]: --> [2:OK]
Jul 31 16:35:02.58: [16162]: <-- [20:ATS8=2S7=60&H3&D2&C0]
Jul 31 16:35:02.72: [16162]: --> [2:OK]
Jul 31 16:35:02.72: [16162]: <-- [13:AT+FCLASS=2.0]
Jul 31 16:35:02.96: [16162]: --> [2:OK]
Jul 31 16:35:02.96: [16162]: <-- [8:AT+FLO=2]
Jul 31 16:35:03.11: [16162]: --> [2:OK]
Jul 31 16:35:03.11: [16162]: <-- [8:AT+FPP=0]
Jul 31 16:35:03.28: [16162]: --> [2:OK]
Jul 31 16:35:03.28: [16162]: <-- [8:AT+FBO=0]
Jul 31 16:35:03.44: [16162]: --> [2:OK]
Jul 31 16:35:03.45: [16162]: <-- [9:AT+FCT=30]
Jul 31 16:35:03.61: [16162]: --> [2:OK]
Jul 31 16:35:03.61: [16162]: <-- [14:AT+FNR=1,1,1,1]
Jul 31 16:35:03.78: [16162]: --> [2:OK]
Jul 31 16:35:03.78: [16162]: <-- [8:AT+FIE=0]
Jul 31 16:35:03.94: [16162]: --> [2:OK]
Jul 31 16:35:03.95: [16162]: <-- [8:AT+FBU=1]
Jul 31 16:35:04.10: [16162]: --> [2:OK]
Jul 31 16:35:04.10: [16162]: <-- [22:AT+FCC=1,5,2,2,1,0,0,0]
Jul 31 16:35:04.24: [16162]: --> [2:OK]
Jul 31 16:35:04.24: [16162]: <-- [4:ATM0]
Jul 31 16:35:04.38: [16162]: --> [2:OK]
Jul 31 16:35:04.38: [16162]: STATE CHANGE: RUNNING -> SENDING
Jul 31 16:35:04.41: [16162]: <-- [13:AT+FCLASS=2.0]
Jul 31 16:35:04.64: [16162]: --> [2:OK]
Jul 31 16:35:04.64: [16162]: <-- [8:AT+FLO=2]
Jul 31 16:35:04.78: [16162]: --> [2:OK]
Jul 31 16:35:04.78: [16162]: <-- [8:AT+FPP=0]
Jul 31 16:35:04.92: [16162]: --> [2:OK]
Jul 31 16:35:04.92: [16162]: <-- [8:AT+FBO=0]
Jul 31 16:35:05.06: [16162]: --> [2:OK]
Jul 31 16:35:05.06: [16162]: <-- [9:AT+FCT=30]
Jul 31 16:35:05.20: [16162]: --> [2:OK]
Jul 31 16:35:05.20: [16162]: <-- [14:AT+FNR=1,1,1,1]
Jul 31 16:35:05.34: [16162]: --> [2:OK]
Jul 31 16:35:05.34: [16162]: <-- [8:AT+FIE=0]
Jul 31 16:35:05.48: [16162]: --> [2:OK]
Jul 31 16:35:05.48: [16162]: <-- [8:AT+FBU=1]
Jul 31 16:35:05.62: [16162]: --> [2:OK]
Jul 31 16:35:05.62: [16162]: <-- [22:AT+FCC=1,5,2,2,1,0,0,0]
Jul 31 16:35:05.76: [16162]: --> [2:OK]
Jul 31 16:35:05.76: [16162]: <-- [21:AT+FLI="+12068890454"]
Jul 31 16:35:05.90: [16162]: --> [2:OK]
Jul 31 16:35:05.90: [16162]: DIAL 14159480424
Jul 31 16:35:05.90: [16162]: <-- [15:ATDT14159480424]
Jul 31 16:35:26.16: [16162]: --> [4:+FCO]
Jul 31 16:35:26.16: [16162]: --> [124:+FNF:00 00 79 00 00 00 96 0F 09 13 00
10 05 16 8D C0 D0 80 08 01 49 02 43 4F 44 41 20 20 20 20 20 20 20 20 20 20
20
20 03 ]
Jul 31 16:35:26.16: [16162]: REMOTE NSF "00 00 79 00 00 00 96 0F 09 13 00 10
05 16 8D C0 D0 80 08 01 49 02 43 4F 44 41 20 20 20 20 20 20 20 20 20 20 20
20
03"
Jul 31 16:35:26.30: [16162]: --> [26:+FCI: 4159480424 ]
Jul 31 16:35:26.30: [16162]: REMOTE CSI "4159480424"
Jul 31 16:35:26.30: [16162]: --> [20:+FIS:1,3,0,2,1,1,0,4]
Jul 31 16:35:26.30: [16162]: --> [2:OK]
Jul 31 16:35:26.30: [16162]: REMOTE best rate 9600 bit/s
Jul 31 16:35:26.30: [16162]: REMOTE max page width 1728 pixels in 215 mm
Jul 31 16:35:26.30: [16162]: REMOTE max unlimited page length
Jul 31 16:35:26.30: [16162]: REMOTE best vres 7.7 line/mm
Jul 31 16:35:26.30: [16162]: REMOTE best format 2-D MR
Jul 31 16:35:26.30: [16162]: REMOTE supports error correction mode
Jul 31 16:35:26.30: [16162]: REMOTE best 20 ms, 10 ms/scanline
Jul 31 16:35:26.30: [16162]: REMOTE does not support PostScript transfer
Jul 31 16:35:26.30: [16162]: USE 9600 bit/s
Jul 31 16:35:26.31: [16162]: USE 20 ms, 10 ms/scanline
Jul 31 16:35:26.31: [16162]: USE error correction mode
Jul 31 16:35:26.31: [16162]: SEND file "docq/doc206.cover;71"
Jul 31 16:35:26.31: [16162]: USE page width 1728 pixels in 215 mm
Jul 31 16:35:26.31: [16162]: USE unlimited page length
Jul 31 16:35:26.31: [16162]: USE 7.7 line/mm
Jul 31 16:35:26.31: [16162]: USE 2-D MR
Jul 31 16:35:26.31: [16162]: <-- [22:AT+FIS=1,3,0,2,1,1,0,4]
Jul 31 16:35:26.46: [16162]: --> [2:OK]
Jul 31 16:35:26.46: [16162]: <-- [6:AT+FDT]
Jul 31 16:35:32.68: [16162]: --> [20:+FCS:1,3,0,2,1,1,0,3]
Jul 31 16:35:32.68: [16162]: --> [7:CONNECT]
Jul 31 16:35:32.68: [16162]: SEND begin page
Jul 31 16:35:32.69: [16162]: <-- data [1028]
Jul 31 16:35:32.69: [16162]: <-- data [1040]
Jul 31 16:35:32.69: [16162]: <-- data [1030]
Jul 31 16:35:32.69: [16162]: <-- data [1030]
Jul 31 16:35:33.08: [16162]: <-- data [1025]
Jul 31 16:35:33.28: [16162]: <-- data [1026]
Jul 31 16:35:33.58: [16162]: <-- data [1060]
Jul 31 16:35:33.88: [16162]: <-- data [1065]
Jul 31 16:35:34.08: [16162]: <-- data [1030]
Jul 31 16:35:34.38: [16162]: <-- data [1043]
Jul 31 16:35:34.68: [16162]: <-- data [1030]
Jul 31 16:35:34.88: [16162]: <-- data [1044]
Jul 31 16:35:35.16: [16162]: <-- data [1027]
Jul 31 16:35:35.46: [16162]: <-- data [1037]
Jul 31 16:35:35.76: [16162]: <-- data [1030]
Jul 31 16:35:35.96: [16162]: <-- data [1025]
Jul 31 16:35:36.26: [16162]: <-- data [1057]
Jul 31 16:35:36.56: [16162]: <-- data [1056]
Jul 31 16:35:36.76: [16162]: <-- data [1025]
Jul 31 16:35:37.06: [16162]: <-- data [1031]
Jul 31 16:35:37.36: [16162]: <-- data [1028]
Jul 31 16:35:37.56: [16162]: <-- data [1026]
Jul 31 16:35:37.86: [16162]: <-- data [1032]
Jul 31 16:35:38.16: [16162]: <-- data [1026]
Jul 31 16:35:38.46: [16162]: <-- data [1032]
Jul 31 16:35:38.66: [16162]: <-- data [1024]
Jul 31 16:35:52.28: [16162]: <-- data [410]
Jul 31 16:35:52.57: [16162]: SENT 27034 bytes of data
Jul 31 16:35:52.58: [16162]: SEND 2D RTC
Jul 31 16:35:52.58: [16162]: <-- data [10]
Jul 31 16:35:52.77: [16162]: SEND end page
Jul 31 16:35:52.78: [16162]: SEND send MPS (more pages, same document)
Jul 31 16:35:52.78: [16162]: <-- data [2]
Jul 31 16:37:45.98: [16162]: --> [7:+FHS:68]
Jul 31 16:37:45.98: [16162]: REMOTE HANGUP: Unknown hangup code (code 68)
Jul 31 16:37:45.98: [16162]: <-- [4:ATH0]
Jul 31 16:37:45.98: [16162]: --> [2:OK]
Jul 31 16:37:46.08: [16162]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Jul 31 16:37:46.09: [16162]: SESSION END
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic