[prev in list] [next in list] [prev in thread] [next in thread] 

List:       quagga-users
Subject:    [quagga-users 7113] help needed, howto setup 2 backbones
From:       "Sergio Baiao" <sergiobaiao () gmail ! com>
Date:       2006-06-19 5:10:09
Message-ID: 9d82369c0606182210q6364ef8cibc671630ada8eafd () mail ! gmail ! com
[Download RAW message or body]

 if anybody can help me, here is my doubt (sorry if my english is not too good):

i have a linux router that i need to link to 2 different routers,
different internet backbones.Should i use quagga for this or is there
any other solution? if yes, how can i configure it? i have eth0 for
the 1st backbone and eth1 for the second, and eth2 for the internal
network.

The configuration of my network is as following:

eth0 (1st backbone - EMBRATEL)
inet addr:201.45.52.130
Mask:255.255.255.192


eth1 (2nd backbone - TELEMAR)
inet addr:200.164.85.181
Mask:255.255.255.248

eth2 (internal network)
inet addr:128.1.0.253
Mask:255.255.255.0


The backbone currently being used is on eth1, and i run a webserver on
another machine on my internal network. Port 80 is being forwarded
from my linux firewall to the webserver.

What i want:

I need that the internal network use only the 1st backbone for
internet connectivity, and i need the webserver to be accessible using
any of the backbones.


Please, if someone could help me, i would thank in advance...
_______________________________________________
Quagga-users mailing list
Quagga-users@lists.quagga.net
http://lists.quagga.net/mailman/listinfo/quagga-users
[prev in list] [next in list] [prev in thread] [next in thread]