[prev in list] [next in list] [prev in thread] [next in thread] 

List:       net-snmp-support
Subject:    [ net-snmp-Support Requests-311107 ] init_kmem error when running snmpd daemo
From:       noreply () sourceforge ! net
Date:       2001-03-23 11:32:50
[Download RAW message or body]

Support Requests item #311107, was updated on 2001-01-03 16:31
You can respond by visiting: 
http://sourceforge.net/tracker/?func=detail&atid=212694&aid=311107&group_id=12694

Category: None
Group: None
Status: Open
Priority: 5
Submitted By: Husam Ayish (husam)
Assigned to: Nobody/Anonymous (nobody)
Summary: init_kmem error when running snmpd daemo

Initial Comment:


----------------------------------------------------------------------

> Comment By: Dave Shield (dts12)
Date: 2001-03-23 03:32

Message:
Logged In: YES 
user_id=88893

Claire - without some more details about your problem,
it's not really possible to help.   What architecture
system are you running on?  Did you compile the code
yourself, or obtain it from somewhere else?   If so,
are you sure that this is the same architecture it was
compiled on?

Dave

----------------------------------------------------------------------

Comment By: Nobody/Anonymous (nobody)
Date: 2001-03-21 11:54

Message:
Logged In: NO 

HI I get quite the same thin gexcept that it says : kvm_open failed :Premission \
denied . Any idea why ?
Claire 

----------------------------------------------------------------------

Comment By: Dave Shield (dts12)
Date: 2001-03-19 07:45

Message:
Logged In: YES 
user_id=88893

The snmp agent needs to delve fairly deeply into the
guts of the operating system, to retrieve the information
it needs.  One effect of this is that it is *not* usually
possible to run an agent compiled for one O/S release
on a system running a different O/S release.   You *will*
need to re-compile on the 2.7 system.

  If you require any further assistance, you're going
to have to provide details of what sort of make problems
you encountered.

Dave

----------------------------------------------------------------------

Comment By: Nobody/Anonymous (nobody)
Date: 2001-01-04 06:37

Message:
Logged In: YES 
user_id=76242
Browser: Mozilla/4.0 (compatible; Konqueror/1.93 Beta >= 20000813; X11); Supports \
MD5-Digest; Supports gzip encoding

What were the errors you saw from the "make" command?


----------------------------------------------------------------------

Comment By: Nobody/Anonymous (nobody)
Date: 2001-01-03 16:31

Message:
Logged In: YES 
user_id=128078
Browser: Mozilla/4.04 [en] (X11; I; SunOS 5.6 sun4u)

Well,

i downloaded ucd-snmp-4.2-solaris2.6.tar.gz into my
system and it works fine. When tried to test it in
another system that runs 2.7, the snmpd daemon comes
always with the error message below:

init_kmem: kvm_open failed: Error 0

I tried to down load ucd-snmp-4.2.tar.gz and compile it
in 2.7 environment. This also did not work during
"make" and 
"make install" process due to missing snmpd. 


Any ideas. Your help is much appreciated.

Rgds,

Husam.




----------------------------------------------------------------------

You can respond by visiting: 
http://sourceforge.net/tracker/?func=detail&atid=212694&aid=311107&group_id=12694

_______________________________________________
Net-snmp-support mailing list
Net-snmp-support@lists.sourceforge.net
http://lists.sourceforge.net/lists/listinfo/net-snmp-support


[prev in list] [next in list] [prev in thread] [next in thread]