[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-smp
Subject: =?iso-8859-1?Q?Unregelm=E4ssigkeiten_bei_den_Bootvorg=E4ngen?=
From: Samuel.Liechti () swisscom ! com
Date: 2001-06-28 7:51:59
[Download RAW message or body]
Guten Tag
HARDWARE
=========
Mainboard: CUV4X-DLS ATX Dual FCPGA CPU,
VIA 695XDP,
133 MHz FSB,
Ultra 160 SCSI & LAN
2 CPU's: CPU INTEL FCPGA 1000/133 MHz
4 DIM256F: 256 MB DIMM (PC133 MHz) zu 133 MHz FSB Mainboard HQ
3 HD HD Ultrastar 36LZX/18.3 GB Retail
UNREGELMÄSSIGKEITEN
====================
- normaler Boot
<<boot.txt>>
- Systemstillstand ohne Registerdump
<<bad_boot.txt>>
- Systemstillstand mit Registerdump
<<IO_APIC.txt>>
WEITERES VORGEHEN
==================
- Ich habe noch Installationssupport bei SuSE für mein Linux 7.1.
- Wie können werden Sie mich unterstützen?
- haben Sie genug Information?
- gibt es eine Umgehnungslösung?
freue mich auf Euren baldigen Entscheid
mfG
Samuel LIECHTI
["boot.txt" (text/plain)]
Inspecting /boot/System.map-2.4.0-64GB-SMP
Loaded 11674 symbols from /boot/System.map-2.4.0-64GB-SMP.
Symbols match kernel version 2.4.0.
Loaded 67 symbols from 2 modules.
klogd 1.3-3, log source = ksyslog started.
IRQ 00, APIC ID 2, APIC INT 00
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 08, APIC ID 2, APIC INT 08
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f
<4>Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 10
<4>Int: type 0, pol 3, trig 3, bus 2, IRQ 00, APIC ID 2, APIC INT 00
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 13, APIC ID 2, APIC INT 12
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 1c, APIC ID 2, APIC INT 11
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 20, APIC ID 2, APIC INT 13
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 21, APIC ID 2, APIC INT 10
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 30, APIC ID 2, APIC INT 10
<4>Lint: type 3, pol 1, trig 1, bus 2, IRQ 00, APIC ID ff, APIC LINT 00
<4>Lint: type 1, pol 1, trig 1, bus 2, IRQ 00, APIC ID ff, APIC LINT 01
<4>Processors: 2
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>Kernel command line: auto BOOT_IMAGE=linux_2.4 ro root=80a
BOOT_FILE=/boot/vmlinuz_24
<4>Initializing CPU#0
<4>Detected 1004.516 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 2005.40 BogoMIPS
<4>Memory: 1027616k/1048560k available (1511k kernel code, 20556k reserved,
591k data, 124k init, 131056k highmem)
<4>Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
<4>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<4>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<4>CPU: L1 I cache: 16K, L1 D cache: 16K
<4>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<4>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<4>CPU: L1 I cache: 16K, L1 D cache: 16K
<4>CPU: L2 cache: 256K
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU0: Intel Pentium III (Coppermine) stepping 06
<4>per-CPU timeslice cutoff: 731.07 usecs.
<4>Getting VERSION: 40011
<4>Getting VERSION: 40011
<4>Getting ID: 3000000
<4>Getting ID: c000000
<4>Getting LVT0: 8700
<4>Getting LVT1: 400
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>CPU present map: 9
<4>Booting processor 1/0 eip 2000
<4>Setting warm reset code and vector.
<4>1.
<4>2.
<4>3.
<4>Asserting INIT.
<4>Waiting for send to finish...
<4>+Deasserting INIT.
<4>Waiting for send to finish...
<4>+#startup loops: 2.
<4>Sending STARTUP #1.
<4>After apic_write.
<4>Initializing CPU#1
<4>CPU#1 (phys ID: 0) waiting for CALLOUT
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+Sending STARTUP #2.
<4>After apic_write.
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+After Startup.
<4>Before Callout 1.
<4>After Callout 1.
<4>CALLIN, before setup_local_APIC().
<4>masked ExtINT on CPU#1
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 2005.40 BogoMIPS
<4>Stack at about c211dfbc
<4>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<4>CPU: L1 I cache: 16K, L1 D cache: 16K
<4>CPU: L2 cache: 256K
<6>Intel machine check reporting enabled on CPU#1.
<4>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>OK.
<4>CPU1: Intel Pentium III (Coppermine) stepping 06
<4>CPU has booted.
<4>Before bogomips.
<6>Total of 2 processors activated (4010.80 BogoMIPS).
<4>Before bogocount - setting activated=1.
<4>Boot done.
<4>ENABLING IO-APIC IRQs
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<4>Synchronizing Arb IDs.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-5, 2-9, 2-10, 2-11, 2-13, 2-20, 2-21, 2-22, 2-23
not connected.
<6>..TIMER: vector=49 pin1=2 pin2=0
<6>activating NMI Watchdog ... done.
<7>number of MP IRQ sources: 18.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178011
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0011
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 003 03 0 1 1 1 1 1 1 31
<7> 01 003 03 0 0 0 0 0 1 1 39
<7> 02 003 03 0 0 0 0 0 1 1 31
<7> 03 003 03 0 0 0 0 0 1 1 41
<7> 04 003 03 0 0 0 0 0 1 1 49
<7> 05 000 00 1 0 0 0 0 0 0 00
<7> 06 003 03 0 0 0 0 0 1 1 51
<7> 07 003 03 0 0 0 0 0 1 1 59
<7> 08 003 03 0 0 0 0 0 1 1 61
<7> 09 000 00 1 0 0 0 0 0 0 00
<7> 0a 000 00 1 0 0 0 0 0 0 00
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 003 03 0 0 0 0 0 1 1 69
<7> 0d 000 00 1 0 0 0 0 0 0 00
<7> 0e 003 03 0 0 0 0 0 1 1 71
<7> 0f 003 03 0 0 0 0 0 1 1 79
<7> 10 003 03 1 1 0 1 0 1 1 81
<7> 11 003 03 1 1 0 1 0 1 1 89
<7> 12 003 03 1 1 0 1 0 1 1 91
<7> 13 003 03 1 1 0 1 0 1 1 99
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 000 00 1 0 0 0 0 0 0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 0-> 2
<7>IRQ1 -> 1
<7>IRQ3 -> 3
<7>IRQ4 -> 4
<7>IRQ6 -> 6
<7>IRQ7 -> 7
<7>IRQ8 -> 8
<7>IRQ12 -> 12
<7>IRQ14 -> 14
<7>IRQ15 -> 15
<7>IRQ16 -> 16
<7>IRQ17 -> 17
<7>IRQ18 -> 18
<7>IRQ19 -> 19
<6>.................................... done.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1004.4994 MHz.
<4>..... host bus clock speed is 133.9331 MHz.
<4>cpu: 0, clocks: 1339331, slice: 446443
<4>CPU0<T0:1339328,T1:891904,D:981,S:446443,C:1339331>
<4>cpu: 1, clocks: 1339331, slice: 446443
<4>CPU1<T0:1339328,T1:445728,D:714,S:446443,C:1339331>
<4>checking TSC synchronization across CPUs: passed.
<4>Setting commenced=1, go go go
<4>PCI: PCI BIOS revision 2.10 entry at 0xf0d00, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<4>PCI: Using IRQ router VIA [1106/0686] at 00:04.0
<4>PCI->APIC IRQ transform: (B0,I4,P3) -> 18
<4>PCI->APIC IRQ transform: (B0,I4,P3) -> 18
<4>PCI->APIC IRQ transform: (B0,I7,P0) -> 17
<4>PCI->APIC IRQ transform: (B0,I8,P0) -> 19
<4>PCI->APIC IRQ transform: (B0,I8,P1) -> 16
<4>PCI->APIC IRQ transform: (B0,I12,P0) -> 16
<4>PCI->APIC IRQ transform: (B1,I0,P0) -> 16
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>DMI 2.3 present.
<6>49 structures occupying 1508 bytes.
<6>DMI table at 0x000F2AA0.
<4>BIOS Vendor: Award Software, Inc.
<4>BIOS Version: ASUS CUV4X-DLS ACPI BIOS Revision 1004
<4>BIOS Release: 01/09/2001
<4>System Vendor: System Manufacturer.
<4>Product Name: System Name.
<4>Version System Version.
<4>Serial Number SYS-1234567890.
<4>Board Vendor: ASUSTeK Computer INC..
<4>Board Name: CUV4XDLS.
<4>Board Version: REV 1.xx.
<4>Asset Tag: Asset-1234567890.
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
<5>apm: disabled - APM is not SMP safe.
<4>Starting kswapd v1.8
<4>pty: 256 Unix98 ptys configured
<4>block: queued sectors max/low 819657kB/688585kB, 2048 slots per queue
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: enabling 8 loop devices
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 21
<4>VP_IDE: chipset revision 6
<4>VP_IDE: not 100%% native mode: will probe irqs later
<6>VP_IDE: VIA vt82c686a IDE UDMA66 controller on pci0:4.1
<4> ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:pio, hdb:pio
<4> ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio
<4>hda: IRQ probe failed (0xfffffff8)
<4>hda: IRQ probe failed (0xfffffff8)
<4>hda: no response (status = 0x0a), resetting drive
<4>hda: IRQ probe failed (0xfffffff8)
<4>hda: no response (status = 0x0a)
<4>hdb: IRQ probe failed (0xfffffff8)
<4>hdb: IRQ probe failed (0xfffffff8)
<4>hdb: no response (status = 0x0a), resetting drive
<4>hdb: IRQ probe failed (0xfffffff8)
<4>hdb: no response (status = 0x0a)
<4>hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 010, ATAPI CD/DVD-ROM drive
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.12
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>LVM version 0.9 by Heinz Mauelshagen (13/11/2000)
<4>lvm -- Driver successfully initialized
<5>RAMDISK: Compressed image found at block 0
<4>Uncompressing...............................................................................done.
<4>Freeing initrd memory: 476k freed
<6>Serial driver version 5.02 (2000-08-09) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10d
<6>SCSI subsystem driver Revision: 1.00
<4>3w-xxxx: tw_findcards(): No cards found.
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<6>linear personality registered
<6>raid0 personality registered
<6>raid1 personality registered
<6>raid5 personality registered
<6>raid5: measuring checksumming speed
<4> 8regs : 2.286 MB/sec
<4> 32regs : 1.905 MB/sec
<4> pIII_sse : 3.048 MB/sec
<4> pII_mmx : 3.429 MB/sec
<4> p5_mmx : 3.429 MB/sec
<4>raid5: using function: pIII_sse (3.048 MB/sec)
<6>md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<4>md.c: sizeof(mdp_super_t) = 4096
<6>autodetecting RAID arrays
<4>autorun ...
<4>... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 8192 buckets, 64Kbytes
<4>TCP: Hash tables configured (established 65536 bind 65536)
<3>IP-Config: No network devices available.
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (ext2 filesystem).
<6>sym53c8xx: at PCI bus 0, device 8, function 0
<4>sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
<6>sym53c8xx: 53c1010 detected with Symbios NVRAM
<6>sym53c8xx: at PCI bus 0, device 8, function 1
<4>sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
<6>sym53c8xx: 53c1010 detected with Symbios NVRAM
<6>sym53c1010-0: rev 0x1 on pci bus 0 device 8 function 0 irq 19
<6>sym53c1010-0: Symbios format NVRAM, ID 7, Fast-80, Parity Checking
<6>sym53c1010-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
00/4e/a0/01/00/04
<6>sym53c1010-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
00/4e/80/00/08/04
<6>sym53c1010-0: on-chip RAM at 0xf5000000
<4>sym53c1010-0: resetting, command processing suspended for 2 seconds
<6>sym53c1010-0: restart (scsi reset).
<4>sym53c1010-0: enabling clock multiplier
<6>sym53c1010-0: handling phase mismatch from SCRIPTS.
<4>sym53c1010-0: Downloading SCSI SCRIPTS.
<6>sym53c1010-1: rev 0x1 on pci bus 0 device 8 function 1 irq 16
<6>sym53c1010-1: Symbios format NVRAM, ID 7, Fast-80, Parity Checking
<6>sym53c1010-1: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
00/4e/a0/01/00/04
<6>sym53c1010-1: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
00/4e/80/00/08/04
<6>sym53c1010-1: on-chip RAM at 0xf4000000
<4>sym53c1010-1: resetting, command processing suspended for 2 seconds
<6>sym53c1010-1: restart (scsi reset).
<4>sym53c1010-1: enabling clock multiplier
<6>sym53c1010-1: handling phase mismatch from SCRIPTS.
<4>sym53c1010-1: Downloading SCSI SCRIPTS.
<6>scsi0 : sym53c8xx - version 1.6b
<6>scsi1 : sym53c8xx - version 1.6b
<4>sym53c1010-0: command processing resumed
<4> Vendor: IBM Model: DDYS-T18350N Rev: S96H
<4> Type: Direct-Access ANSI SCSI revision: 03
<4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
<4>sym53c1010-1: command processing resumed
<4> Vendor: IBM Model: DDYS-T18350N Rev: S96H
<4> Type: Direct-Access ANSI SCSI revision: 03
<4>Detected scsi disk sdb at scsi0, channel 0, id 2, lun 0
<4> Vendor: IBM Model: DDYS-T18350N Rev: S96H
<4> Type: Direct-Access ANSI SCSI revision: 03
<4>Detected scsi disk sdc at scsi0, channel 0, id 4, lun 0
<6>sym53c1010-0-<0,0>: tagged command queue depth set to 8
<6>sym53c1010-0-<2,0>: tagged command queue depth set to 8
<6>sym53c1010-0-<4,0>: tagged command queue depth set to 8
<6>sym53c1010-0-<0,0>: wide msgout: 1-2-3-1.
<6>sym53c1010-0-<0,0>: wide msgin: 1-2-3-1.
<6>sym53c1010-0-<0,0>: wide: wide=1 chg=0.
<6>sym53c1010-0-<0,*>: WIDE SCSI (16 bit) enabled.
<6>sym53c1010-0-<0,0>: wide msgout: 1-2-3-1.
<6>sym53c1010-0-<0,0>: wide msgin: 1-2-3-1.
<6>sym53c1010-0-<0,0>: wide: wide=1 chg=0.
<6>sym53c1010-0-<0,0>: sync msgout: 1-3-1-0-0.
<6>sym53c1010-0-<0,0>: sync msg in: 1-3-1-c-0.
<6>sym53c1010-0-<0,0>: sync: per=0 scntl3=0x0 scntl4=0x0 ofs=0 fak=7 chg=0.
<4>SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
<6>Partition check:
<6> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
<6>sym53c1010-0-<2,0>: ppr msgout: 1-6-4-9-0-3e-1-2.
<6>sym53c1010-0-<2,0>: ppr msg in: 1-6-4-9-0-3e-1-2.
<6>sym53c1010-0-<2,0>: ppr: wth=1 per=9 scntl3=0x10 scntl4=0x80 ofs=62 fak=0
chg=0.
<6>sym53c1010-0-<2,*>: FAST-80 WIDE SCSI 160.0 MB/s (12 ns, offset 62)
<6>sym53c1010-0-<2,0>: ppr msgout: 1-6-4-9-0-3e-1-2.
<6>sym53c1010-0-<2,0>: ppr msg in: 1-6-4-9-0-3e-1-2.
<6>sym53c1010-0-<2,0>: ppr: wth=1 per=9 scntl3=0x10 scntl4=0x80 ofs=62 fak=0
chg=0.
<4>SCSI device sdb: 35843670 512-byte hdwr sectors (18352 MB)
<6> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >
<6>sym53c1010-0-<4,0>: ppr msgout: 1-6-4-9-0-3e-1-2.
<6>sym53c1010-0-<4,0>: ppr msg in: 1-6-4-9-0-3e-1-2.
<6>sym53c1010-0-<4,0>: ppr: wth=1 per=9 scntl3=0x10 scntl4=0x80 ofs=62 fak=0
chg=0.
<6>sym53c1010-0-<4,*>: FAST-80 WIDE SCSI 160.0 MB/s (12 ns, offset 62)
<6>sym53c1010-0-<4,0>: ppr msgout: 1-6-4-9-0-3e-1-2.
<6>sym53c1010-0-<4,0>: ppr msg in: 1-6-4-9-0-3e-1-2.
<6>sym53c1010-0-<4,0>: ppr: wth=1 per=9 scntl3=0x10 scntl4=0x80 ofs=62 fak=0
chg=0.
<4>SCSI device sdc: 35843670 512-byte hdwr sectors (18352 MB)
<6> sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 >
<6>usb.c: registered new driver usbdevfs
<6>usb.c: registered new driver hub
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>change_root: old root has d_count=3
<5>Trying to unmount old root ... okay
<4>Freeing unused kernel memory: 124k freed
<6>Adding Swap: 265032k swap-space (priority -1)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started at Tue Jun 26 13:08:12 2001
Activating swap-devices in /etc/fstab...
done
Checking file systems...
Parallelizing fsck version 1.19a (13-Jul-2000)
/dev/sda10: clean, 7581/467712 files, 35275/933770 blocks
/dev/sdc10: clean, 688/470496 files, 19282/939794 blocks
/dev/sdb10: clean, 16901/470496 files, 134566/939794 blocks
/dev/sda8: clean, 38/2000 files, 5671/8001 blocks
/dev/sdc9: clean, 396/470496 files, 16034/939794 blocks
/dev/sdb9: clean, 9255/470496 files, 77678/939794 blocks
/dev/sda11: clean, 57426/467712 files, 153141/933770 blocks
/dev/sda9: clean, 1674/76304 files, 44151/305203 blocks
done
Setting up /lib/modules/2.4.0-64GB-SMP done
Mounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda8 on /boot type ext2 (rw)
/dev/sdc10 on /exnd type ext2 (rw)
/dev/sdc9 on /home type ext2 (rw)
/dev/sdb10 on /opt type ext2 (rw)
/dev/sda11 on /usr type ext2 (rw)
/dev/sdb9 on /usr/lib type ext2 (rw)
/dev/sda9 on /var type ext2 (rw)
done
Setting up the CMOS clock done
Starting ldconfig (setting up /etc/ld.so.cache) done
Setting up timezone data done
Setting up loopback device done
Setting up hostname done
Mount SHM FS on /dev/shm done
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configuring serial ports
done
Running /etc/init.d/boot.local
done
Creating /var/log/boot.msg
done
Enabling syn flood protection done
Disabling IP forwarding done
Boot logging started at Tue Jun 26 12:59:20 2001
Master Resource Control: previous runlevel: N, switching to runlevel: 5
Starting sound driver: snd-card-emu10k1 done
Starting personal-firewall (initial) [not active] unused
Initializing random number generator done
Starting RPC portmap daemon done
Starting SSH daemon done
Starting syslog services done
Starting lpd done
Starting service usbmgr done
Starting service at daemon: done
Loading keymap qwertz/sg-latin1.map.gz
done
Loading compose table winkeys shiftctrl latin1.add done
Loading console font lat1-16.psfu
done
Loading unimap lat1u.uni
done
Setting up console ttys
done
Starting Name Service Cache Daemon done
Starting CRON daemon done
Starting service kdm done
Starting inetd done
Starting personal-firewall (final) [not active] unused
Master Resource Control: runlevel 5 has been reached
boot.msg 26.06.2001
Seite - 1 / 9 -
["bad_boot.txt" (text/plain)]
Inspecting /boot/System.map-2.4.0-64GB-SMP
Loaded 11674 symbols from /boot/System.map-2.4.0-64GB-SMP.
Symbols match kernel version 2.4.0.
Loaded 67 symbols from 2 modules.
klogd 1.3-3, log source = ksyslog started.
IRQ 00, APIC ID 2, APIC INT 00
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 08, APIC ID 2, APIC INT 08
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e
<4>Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f
<4>Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 10
<4>Int: type 0, pol 3, trig 3, bus 2, IRQ 00, APIC ID 2, APIC INT 00
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 13, APIC ID 2, APIC INT 12
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 1c, APIC ID 2, APIC INT 11
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 20, APIC ID 2, APIC INT 13
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 21, APIC ID 2, APIC INT 10
<4>Int: type 0, pol 3, trig 3, bus 0, IRQ 30, APIC ID 2, APIC INT 10
<4>Lint: type 3, pol 1, trig 1, bus 2, IRQ 00, APIC ID ff, APIC LINT 00
<4>Lint: type 1, pol 1, trig 1, bus 2, IRQ 00, APIC ID ff, APIC LINT 01
<4>Processors: 2
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>Kernel command line: auto BOOT_IMAGE=linux_2.4 ro root=80a
BOOT_FILE=/boot/vmlinuz_24
<4>Initializing CPU#0
<4>Detected 1004.516 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 2005.40 BogoMIPS
<4>Memory: 1027616k/1048560k available (1511k kernel code, 20556k reserved,
591k data, 124k init, 131056k highmem)
<4>Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
<4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
<4>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<4>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<4>CPU: L1 I cache: 16K, L1 D cache: 16K
<4>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<4>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<4>CPU: L1 I cache: 16K, L1 D cache: 16K
<4>CPU: L2 cache: 256K
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU0: Intel Pentium III (Coppermine) stepping 06
<4>per-CPU timeslice cutoff: 731.07 usecs.
<4>Getting VERSION: 40011
<4>Getting VERSION: 40011
<4>Getting ID: 3000000
<4>Getting ID: c000000
<4>Getting LVT0: 8700
<4>Getting LVT1: 400
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>CPU present map: 9
<4>Booting processor 1/0 eip 2000
<4>Setting warm reset code and vector.
<4>1.
<4>2.
<4>3.
<4>Asserting INIT.
<4>Waiting for send to finish...
<4>+Deasserting INIT.
<4>Waiting for send to finish...
<4>+#startup loops: 2.
<4>Sending STARTUP #1.
<4>After apic_write.
<4>Initializing CPU#1
<4>CPU#1 (phys ID: 0) waiting for CALLOUT
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+Sending STARTUP #2.
<4>After apic_write.
<4>Startup point 1.
<4>Waiting for send to finish...
<4>+After Startup.
<4>Before Callout 1.
<4>After Callout 1.
<4>CALLIN, before setup_local_APIC().
<4>masked ExtINT on CPU#1
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>Calibrating delay loop... 2005.40 BogoMIPS
<4>Stack at about c211dfbc
<4>CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
<4>CPU: L1 I cache: 16K, L1 D cache: 16K
<4>CPU: L2 cache: 256K
<6>Intel machine check reporting enabled on CPU#1.
<4>CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<4>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>OK.
>CPU1: Intel Pentium III (Coppermine) stepping 06
>CPU has booted.
>Before bogocount-setting activated=1.
>Boot done.
>Enabling IO-APIC IRQs
>... changing IO-APIC physical APIC ID to 2 ... ok.
>Synchronizing Arb IDS
>... TIMER: vektor=49 pin1=2 pin2=0
>activating NMI watchdog ...
badboot.msg 26.06.2001
Seite - 3 / 3 -
["IO_APIC.txt" (text/plain)]
BOOT.MSG (last screen)
========
testing the IO APIC ............................................. 26.Jun.01 ....
WARNING unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
............................................................................done
calibrating APIC timer ...
..... CPU clock speed is 1004.7010 MHz
..... host bus clock speed is 133.9600 MHz
cpu: 0, clocks: 1339600, slice: 446533
NMI Watchdog dedected LOCKUP on CPU1, registers:
CPU: 1
EIP: 0010:[<c03157f8>]
EFLAGS: 00000246
eax: 00000000 ebx: c211dfbc ecx: 00000001 edx: 00000001
esi: 00000000 edi: 00000000 ebp: 00000000 esp: c211df9c
ds: 0018 es: 0018 ss:0018
Process Swapper (pid: 0, stackpage = c211d000)
Stack: c211dfbc 00000000 00000000 00000000 c0282b84 c211dfbc c03159d0 00000002
00000001 c03159de c2110000 c036c740 00000000 c020a457 00000000 0000000d
00000000 00000000 00000000 c01c158e c2110000 00000001 c036c70a 00000000
Call Trace: [<c020a457>][<c01c158e>]
Code f0 83 44 24 00 a1 d4 1c 2f c0 85 c0 74 f1 bd 00 e0 ff ff
-
To unsubscribe from this list: send the line "unsubscribe linux-smp" in
the body of a message to majordomo@vger.kernel.org
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic