[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-smp
Subject:    unexpected IO-APIC when booting
From:       Scott Sibert <ssibert () hollins ! edu>
Date:       2000-11-09 15:32:54
[Download RAW message or body]

Hello.

I am not on this list so if you need to respond to me please email me
directly.

In booting my stock RH70 kernel I got the attached message.


The machine is a Dell Precision 420 Workstation.  It is a dual P3-800 with
1gb of PC800 RDRAM.  The kernel is the stock RH70 SMP kernel.

The message said I should email this list about the unexpected IO-APIC.

Also, my dnetc client has started running on only one processor instead of
two processors.  Two crunchers start but only run on one processor.
Yesterday (when I installed RH on this machine) dnetc was running on both
processors.  I am not sure if the IO-APIC could be affecting this.

Once again, please email me directly.

Thanks.

--Scott


["io-apic.txt" (TEXT/PLAIN)]

Linux version 2.2.16-22enterprise (root@porky.devel.redhat.com) (gcc version \
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 SMP Tue Aug 22 16:29:32 EDT 2000 \
127MB BIGMEM available. Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: DELL     Product ID: WS 420       APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 32 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
relocating initrd image:
    initrd_start:0xc0f8b000    initrd_end:0xc0fff7e1
    mem_start:0xc02a5000    mem_end:0xf8000000
    initrd_size:0x000747e1     dest:0xf7f8b000
Detected 797979 kHz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 1592.52 BogoMIPS
Memory: 1035140k/1048128k available (1120k kernel code, 420k reserved, 10904k data, \
76k init, 130624k bigmem) Dentry hash table entries: 262144 (order 9, 2048k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 262144 (order 8, 1024k)
VFS: Diskquotas version dquot_6.4.0 initialized
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
per-CPU timeslice cutoff: 50.04 usecs.
CPU0: Intel Pentium III (Coppermine) stepping 03
calibrating APIC timer ...
..... CPU clock speed is 797.9891 MHz.
..... system bus clock speed is 132.9980 MHz.
Booting processor 1 eip 2000
Calibrating delay loop... 1595.80 BogoMIPS
OK.
CPU1: Intel Pentium III (Coppermine) stepping 03
Total of 2 processors activated (3188.33 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 2
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-13, 2-20, 2-21, 2-22, 2-23 not connected.
number of MP IRQ sources: 44.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00170020
.......     : max redirection entries: 0017
.......     : IO APIC version: 0020
 WARNING: unexpected IO-APIC, please mail
          to linux-smp@vger.rutgers.edu
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 000 00  0    0    0   0   0    1    1    59
 02 0FF 0F  0    0    0   0   0    1    1    51
 03 000 00  0    0    0   0   0    1    1    61
 04 000 00  0    0    0   0   0    1    1    69
 05 000 00  0    0    0   0   0    1    1    71
 06 000 00  0    0    0   0   0    1    1    79
 07 000 00  0    0    0   0   0    1    1    81
 08 000 00  0    0    0   0   0    1    1    89
 09 000 00  0    0    0   0   0    1    1    91
 0a 000 00  0    0    0   0   0    1    1    99
 0b 000 00  0    0    0   0   0    1    1    A1
 0c 000 00  0    0    0   0   0    1    1    A9
 0d 000 00  1    0    0   0   0    0    0    00
 0e 000 00  0    0    0   0   0    1    1    B1
 0f 000 00  0    0    0   0   0    1    1    B9
 10 0FF 0F  1    1    0   1   0    1    1    C1
 11 0FF 0F  1    1    0   1   0    1    1    C9
 12 0FF 0F  1    1    0   1   0    1    1    D1
 13 0FF 0F  1    1    0   1   0    1    1    D9
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
.................................... done.
checking TSC synchronization across CPUs: passed.
PCI: PCI BIOS revision 2.10 entry at 0xfc04e
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I31,P3) -> 19
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I4,P0) -> 16
PCI->APIC IRQ transform: (B2,I6,P0) -> 18
PCI->APIC IRQ transform: (B2,I8,P0) -> 16
PCI->APIC IRQ transform: (B3,I10,P0) -> 18
PCI->APIC IRQ transform: (B3,I10,P1) -> 19
Linux NET4.0 for Linux 2.2


-
To unsubscribe from this list: send the line "unsubscribe linux-smp" in
the body of a message to majordomo@vger.kernel.org


[prev in list] [next in list] [prev in thread] [next in thread] 

Configure | About | News | Add a list | Sponsored by KoreLogic