[prev in list] [next in list] [prev in thread] [next in thread]
List: linux-smp
Subject: Urgent: SMP does not work?
From: getrpml () terrorist ! math ! ntu ! edu ! tw
Date: 1998-08-26 9:46:11
[Download RAW message or body]
Hello,
I've been trying to put together a machine from old+new stuff.
SuperMicro P6DOF [Orion chipset]
2x Pentium Pro 166
256MB (32MBx8) parity
Tekram 390F (SCSI-UW, NCR875)
DE-220 ISA NE2000 clone
Matrox Mill2 PCI 8M
Red Hat 5.1, kernel 2.1.117
I already wrote to the SuperMicro tech support, but figure that
I should ask around with the symptoms that I get.
* I can run the machine with either a PPro stepping 7, or a
PPro stepping 9, in either socket, matching either VRM.
[Linux 2.1.117, dual CPU version, boots and run fine.]
* I can boot the machine just fine with either a stepping 7
and a stepping 9, or two stepping 7's [I have two stepping
7's and one stepping 9] but the machine will only see the
CPU in the first socket, marked `CPU 1' on the board.
If anyone else is using this board, can someone tell me what
kind of a problem this could possibly be other than that of
the hardware on the motherboard.
Thanks for any assistance/hints/tips
Yours, Bo-Yin Yang
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic