[prev in list] [next in list] [prev in thread] [next in thread] 

List:       linux-arm-kernel
Subject:    No output after INIT: version 2.74 booting
From:       Nageswari S <nageswari () sanyo ! co ! in>
Date:       2003-07-29 7:11:49
[Download RAW message or body]

Hi,
We are porting linux2.4.19-rmk6 to ARM926EJS board. We r using ramdisk_ks.gz
from Nico's site.

The linux boots up and stops after 
"INIT: version 2.74 booting"

The log message is 

*************************************************************************

boot Monitor > Uncompressing Linux.................................. done,
booting the kernel.

41069263:00000015:00050078
0018A35C-0027BE5C>00008000
0027BE5C
Linux version 2.4.19-rmk6 (root@localhost.localdomain) (gcc version 2.95.3
20010
315 (release)) #645 Tue Jul 29 12:21:10 IST 2003
CPU: ARM926EJ-Sid(wb) revision 3
Machine: ARM-Integrator
Warning: bad configuration page, trying to continue
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram initrd=0x800000,0x800000 load_ramdisk=1
Came inside integrator IRQ
Finished time init
Finished console init
Calibrating delay loop... 719.25 BogoMIPS
Memory: 64MB = 64MB total
Memory: 55420KB available (854K code, 205K data, 48K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
 name is rootfs
mnt value is -1071767264
 name is bdev
mnt value is -1071767200
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
 name is proc
mnt value is -1071767136
POSIX conformance testing by UNIFIX
Came out for start_kernel
returned value is 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
 name is sockfs
mnt value is -1071767072
Initializing RT netlink socket
Memory clock = 18.500 MHz
Module id: 0
Starting kswapd
 name is tmpfs
mnt value is -1071767008
 name is pipefs
mnt value is -1071766944
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
 name is devfs
mnt value is -1071766880
ttyAM%d0 at MEM 0x16000000 (irq = 1) is a AMBA
ttyAM%d1 at MEM 0x17000000 (irq = 2) is a AMBA
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
SMC91x driver for Linux $Revision: 1.8 $
eth0: SMC91C11xFD(rev:1) 32-bit at 0x0 IRQ:27 ADDR: 00:02:f7:00:06:05
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
 type is c3fac000 flags is 0 name is devfs
 name is devfs
mnt value is -1071766816
RAMDISK: Compressed image found at block 0
RAMDISK: Compressed image found at block 0
 type is c37cc000 flags is 8001 name is /dev/root
 name is /dev/root
mnt value is -1071766752
VFS: Mounted root (ext2 filesystem) readonly.
 type is c00e3188 flags is 0 name is none
 name is none
mnt value is -1071766816
Mounted devfs on /dev
Opened initial console
Reached execute command
We are executing exp.o
Using ELF interpreter /lib/ld-linux.so.2
inside elf_interp
(start_brk) 200e360
(end_code) 2005d6e
(start_code) 2000000
(start_data) 200dd70
(end_data) 200e1a4
(start_stack) bfffff40
(brk) 200e360
starting the thread
returning return value
INIT: Version 2.74 booting

******************************************

No output after this. Where could be the problem?

Regards,
Nageswari

-------------------------------------------------------------------
Subscription options: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
FAQ/Etiquette:       http://www.arm.linux.org.uk/armlinux/mailinglists.php

[prev in list] [next in list] [prev in thread] [next in thread]