'Re: [Kde-pim] kpilot sync with Zire 21 -- sync's from PDA->PC but'

[prev in list] [next in list] [prev in thread] [next in thread] 

List:       kde-pim
Subject:    Re: [Kde-pim] kpilot sync with Zire 21 -- sync's from PDA->PC but
From:       "Pascal A. Niklaus" <Pascal.Niklaus () unibas ! ch>
Date:       2004-05-21 16:19:37
Message-ID: 40AE2C19.1050408 () unibas ! ch
[Download RAW message or body]

Hmmm, it works flawlessly with jpilot 0.99.7, so it appars not to be 
related to pilot-link...

Pascal

Pascal A. Niklaus wrote:

> Update:
>
> kpilot actually sync's from the PDA to the PC, but never PC->PDA. I 
> tried different sync settings in "configure -> kpilot -> sync", 
> without success...
>
> Any hint?
>
> Pascal
>
> Pascal.Niklaus@unibas.ch wrote:
>
>> Hi all,
>>
>> I'm trying to get a Palm Zire21 to sync with kpilot. However, 
>> although HotSync
>> is executed, the data I enter on the PDA are never displayed in 
>> kpilot, nor is
>> data transferred the other way round.
>>
>> What might be the reason for this?
>>
>> The PDA reports "HotSync operation complete", but at the end of 
>> kpilot's log,
>> there is a message saying:
>>
>> 17:15:25  HotSync Completed.
>> 17:15:28  Trying to open device /dev/ttyUSB1...
>> 17:15:28  Could not open device: /dev/ttyUSB1 (will retry)
>>
>> Is this ok? After HotSync, the PDA disconnects, so that I'm not 
>> surprised that
>> /dev/ttyUSB1 cannot be opened again.
>>
>> Thanks for your help
>>
>> Pascal
>>
>> -----------------------------
>>
>> kpilot is version 4.4.1 (compiled from source in kdepim-3.2.2)
>> pilot-link is version 0.11.8 (installed from distro)
>> the whole thing runs on SuSE 9.1
>>
>> ========= Full HotSync Log
>>
>> Version: KPilot 4.4.1
>> Version: pilot-link 0.11.8
>> Version: KDE 3.2.2
>> Version: Qt 3.3.2
>>
>> KPilot has been reported to cause data loss. Please check with
>> kdepim-users@kde.org.
>>
>> 17:14:15  Starting the KPilot daemon ...
>> 17:14:16  Daemon status is `'
>> 17:14:16  Pilot device /dev/ttyUSB1 doesn't exist. Assuming the 
>> device uses
>> DevFS.
>> 17:14:17  Trying to open device /dev/ttyUSB1...
>> 17:14:17  Could not open device: /dev/ttyUSB1 (will retry)
>> 17:14:25  Using character set ISO 8859-2 on the handheld.
>> 17:14:25  Pilot device /dev/ttyUSB1 doesn't exist. Assuming the 
>> device uses
>> DevFS.
>> 17:14:26  Trying to open device /dev/ttyUSB1...
>> 17:14:26  Could not open device: /dev/ttyUSB1 (will retry)
>> 17:15:23  Device link ready.
>> 17:15:24  Checking last PC...
>> 17:15:24  KPilot 4.4.1 HotSync starting...
>>
>> 17:15:24  Synchronizing changes by the internal editors of KPilot:
>> 17:15:24  Databases with changed records:
>> 17:15:24  Databases with changed flags:
>> 17:15:24  Databases with changed AppBlock:
>> 17:15:24  End of HotSync
>>
>> 17:15:25  HotSync Completed.
>> 17:15:28  Trying to open device /dev/ttyUSB1...
>> 17:15:28  Could not open device: /dev/ttyUSB1 (will retry)
>>
>> ========= var/log/messages:
>>
>> May 21 17:15:23 linux kernel: usb 2-2: new full speed USB device 
>> using address
>> 27
>> May 21 17:15:23 linux kernel: usb 2-2: Product: Palm Handheld
>> May 21 17:15:23 linux kernel: usb 2-2: Manufacturer: Palm, Inc.
>> May 21 17:15:23 linux kernel: usb 2-2: SerialNumber: PalmSN12345678
>> May 21 17:15:23 linux kernel: usbserial 2-2:1.0: Handspring Visor / 
>> Palm OS
>> converter detected
>> May 21 17:15:23 linux kernel: usb 2-2: Handspring Visor / Palm OS 
>> converter now
>> attached to ttyUSB0 (or usb/tts/0 for devfs)
>> May 21 17:15:23 linux kernel: usb 2-2: Handspring Visor / Palm OS 
>> converter now
>> attached to ttyUSB1 (or usb/tts/1 for devfs)
>> May 21 17:15:23 linux /etc/hotplug/usb.agent[10945]: need a device 
>> for this
>> command
>> May 21 17:15:23 linux /etc/hotplug/tty.agent[10963]: add tty device
>> /class/tty/ttyUSB0
>> May 21 17:15:23 linux /etc/hotplug/tty.agent[10981]: add tty device
>> /class/tty/ttyUSB1
>> May 21 17:15:25 linux kernel: usb 2-2: control timeout on ep0in
>> May 21 17:15:26 linux kernel: usb 2-2: USB disconnect, address 27
>> May 21 17:15:26 linux kernel: visor ttyUSB0: Handspring Visor / Palm OS
>> converter now disconnected from ttyUSB0
>> May 21 17:15:26 linux kernel: visor ttyUSB1: Handspring Visor / Palm OS
>> converter now disconnected from ttyUSB1
>> May 21 17:15:26 linux kernel: usbserial 2-2:1.0: device disconnected
>> May 21 17:15:26 linux /etc/hotplug/tty.agent[11099]: TTY try 1 while 
>> waiting for
>> /class/tty/ttyUSB1's bus_id
>> May 21 17:15:26 linux /etc/hotplug/tty.agent[11083]: TTY try 1 while 
>> waiting for
>> /class/tty/ttyUSB0's bus_id
>> May 21 17:15:26 linux /etc/hotplug/usb.agent[11117]: need a device 
>> for this
>> command
>> May 21 17:15:27 linux /etc/hotplug/tty.agent[11083]: TTY try 2 while 
>> waiting for
>> /class/tty/ttyUSB0's bus_id
>> May 21 17:15:27 linux /etc/hotplug/tty.agent[11099]: TTY try 2 while 
>> waiting for
>> /class/tty/ttyUSB1's bus_id
>> May 21 17:15:28 linux /etc/hotplug/tty.agent[11083]: TTY try 3 while 
>> waiting for
>> /class/tty/ttyUSB0's bus_id
>> May 21 17:15:28 linux /etc/hotplug/tty.agent[11099]: TTY try 3 while 
>> waiting for
>> /class/tty/ttyUSB1's bus_id
>> May 21 17:15:29 linux /etc/hotplug/tty.agent[11083]: TTY try 4 while 
>> waiting for
>> /class/tty/ttyUSB0's bus_id
>> May 21 17:15:29 linux /etc/hotplug/tty.agent[11099]: TTY try 4 while 
>> waiting for
>> /class/tty/ttyUSB1's bus_id
>> May 21 17:15:30 linux /etc/hotplug/tty.agent[11083]: TTY try 5 while 
>> waiting for
>> /class/tty/ttyUSB0's bus_id
>> May 21 17:15:30 linux /etc/hotplug/tty.agent[11099]: TTY try 5 while 
>> waiting for
>> /class/tty/ttyUSB1's bus_id
>>
>>
>> ----------
>

_______________________________________________
kde-pim mailing list
kde-pim@mail.kde.org
https://mail.kde.org/mailman/listinfo/kde-pim
kde-pim home page at http://pim.kde.org/
[prev in list] [next in list] [prev in thread] [next in thread] 