[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-linux
Subject: Re: [kde-linux] KDE 3.5.0 + dbus/hal trouble
From: Tomek Jarzynka <tomee () kadu ! net>
Date: 2006-03-01 12:10:56
Message-ID: 200603011310.57483.tomee () kadu ! net
[Download RAW message or body]
On Tuesday 28 February 2006 20:39, Bram Schoenmakers wrote:
> Op dinsdag 28 februari 2006 10:56, schreef Tomek Jarzynka:
> > I've been trying to get KDE 3.5.0 running with DBUS/hal for a few days
> > now, with no success. KDE is compiled with dbus support, there is an
> > option checked in the configuration, but media:/ shows only some network
> > shares, no hardware, nevermind the hotplug notification.
> Does /var/log/messages show anything hardware related at the moment you
> (un)plug something?
When I plug in a pendrive:
----------------- start
Mar 1 13:06:34 aereo kernel: drivers/usb/input/hid-core.c: input irq status
-75 received
Mar 1 13:06:34 aereo kernel: hub 1-0:1.0: port 1 disabled by hub (EMI?),
re-enabling...
Mar 1 13:06:34 aereo kernel: usb 1-1: USB disconnect, address 4
Mar 1 13:06:35 aereo hal.hotplug[27533]: DEVPATH is not set (subsystem input)
Mar 1 13:06:35 aereo hal.hotplug[27536]: DEVPATH is not set (subsystem input)
Mar 1 13:06:35 aereo kernel: usb 1-1: new low speed USB device using uhci_hcd
and address 5
Mar 1 13:06:35 aereo hal.hotplug[27599]: DEVPATH is not set (subsystem input)
Mar 1 13:06:35 aereo kernel: input: USB HID v1.10 Keyboard [1267:0103] on
usb-0000:00:1d.0-1
Mar 1 13:06:35 aereo hal.hotplug[27647]: DEVPATH is not set (subsystem input)
Mar 1 13:06:35 aereo kernel: input: USB HID v1.10 Device [1267:0103] on
usb-0000:00:1d.0-1
Mar 1 13:06:41 aereo kernel: usb 4-4: new high speed USB device using
ehci_hcd and address 5
Mar 1 13:06:42 aereo kernel: Initializing USB Mass Storage driver...
Mar 1 13:06:42 aereo kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
Mar 1 13:06:42 aereo kernel: usbcore: registered new driver usb-storage
Mar 1 13:06:42 aereo kernel: USB Mass Storage support registered.
Mar 1 13:06:47 aereo kernel: Vendor: Kingston Model: DataTraveler 2.0
Rev: 1.04
Mar 1 13:06:47 aereo kernel: Type: Direct-Access
ANSI SCSI revision: 00
Mar 1 13:06:47 aereo kernel: Attached scsi generic sg0 at scsi0, channel 0,
id 0, lun 0, type 0
Mar 1 13:06:48 aereo scsi.agent[27863]: disk
at /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/host0/target0:0:0/0:0:0:0
Mar 1 13:06:49 aereo kernel: SCSI device sda: 1001472 512-byte hdwr sectors
(513 MB)
Mar 1 13:06:49 aereo kernel: sda: Write Protect is off
Mar 1 13:06:49 aereo kernel: sda: assuming drive cache: write through
Mar 1 13:06:49 aereo kernel: SCSI device sda: 1001472 512-byte hdwr sectors
(513 MB)
Mar 1 13:06:49 aereo kernel: sda: Write Protect is off
Mar 1 13:06:49 aereo kernel: sda: assuming drive cache: write through
Mar 1 13:06:49 aereo kernel: /dev/scsi/host0/bus0/target0/lun0: p1
Mar 1 13:06:49 aereo kernel: Attached scsi removable disk sda at scsi0,
channel 0, id 0, lun 0
----------------- end
What's more,
hal-devies shows (among other non-relevant output like HID etc):
----------------- start
3: udi =
'/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE_if0'
info.udi =
'/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE_if0' (string)
linux.subsystem = 'usb' (string)
linux.hotplug_type = 1 (0x1) (int)
info.product = 'USB Mass Storage Interface' (string)
usb.interface.protocol = 80 (0x50) (int)
usb.interface.subclass = 6 (0x6) (int)
usb.interface.class = 8 (0x8) (int)
usb.interface.number = 0 (0x0) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0' (string)
usb.configuration_value = 1 (0x1) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_subclass = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.vendor_id = 2352 (0x930) (int)
usb.product_id = 25907 (0x6533) (int)
usb.vendor = 'Toshiba Corp.' (string)
usb.product = 'USB Mass Storage Interface' (string)
usb.device_revision_bcd = 256 (0x100) (int)
usb.max_power = 200 (0xc8) (int)
usb.num_ports = 0 (0x0) (int)
usb.linux.device_number = 5 (0x5) (int)
usb.serial = '0E41D850838288EE' (string)
usb.speed_bcd = 294912 (0x48000) (int)
usb.version_bcd = 512 (0x200) (int)
usb.is_self_powered = false (bool)
usb.can_wake_up = false (bool)
usb.bus_number = 4 (0x4) (int)
info.bus = 'usb' (string)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE' (string)
linux.sysfs_path_device =
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0' (string)
4: udi = '/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE'
info.udi =
'/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE' (string)
linux.subsystem = 'usb' (string)
linux.hotplug_type = 1 (0x1) (int)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = false (bool)
usb_device.is_self_powered = false (bool)
usb_device.version_bcd = 512 (0x200) (int)
usb_device.speed_bcd = 294912 (0x48000) (int)
usb_device.serial = '0E41D850838288EE' (string)
usb_device.linux.device_number = 5 (0x5) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.max_power = 200 (0xc8) (int)
usb_device.device_revision_bcd = 256 (0x100) (int)
info.product = 'DataTraveler 2.0' (string)
usb_device.product = 'DataTraveler 2.0' (string)
info.vendor = 'Toshiba Corp.' (string)
usb_device.vendor = 'Toshiba Corp.' (string)
usb_device.product_id = 25907 (0x6533) (int)
usb_device.vendor_id = 2352 (0x930) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4' (string)
info.linux.driver = 'usb' (string)
info.bus = 'usb_device' (string)
linux.sysfs_path_device =
'/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4' (string)
----------------- end
However, media:/ doesn't get updated anyway! :(
--
tomasz k. jarzynka / 601 706 601 / tomee(a-t)kadu(d-o-t)net
"Stany Zjednoczone w żadnym razie nie wspierają się na doktrynie
chrześcijańskiej. (Jerzy Waszyngton)"
___________________________________________________
This message is from the kde-linux mailing list.
Account management: https://mail.kde.org/mailman/listinfo/kde-linux.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic