From kde-linux Wed Mar 01 12:10:56 2006 From: Tomek Jarzynka Date: Wed, 01 Mar 2006 12:10:56 +0000 To: kde-linux Subject: Re: [kde-linux] KDE 3.5.0 + dbus/hal trouble Message-Id: <200603011310.57483.tomee () kadu ! net> X-MARC-Message: https://marc.info/?l=kde-linux&m=114121665409427 On Tuesday 28 February 2006 20:39, Bram Schoenmakers wrote: > Op dinsdag 28 februari 2006 10:56, schreef Tomek Jarzynka: > > I've been trying to get KDE 3.5.0 running with DBUS/hal for a few days > > now, with no success. KDE is compiled with dbus support, there is an > > option checked in the configuration, but media:/ shows only some network > > shares, no hardware, nevermind the hotplug notification. > Does /var/log/messages show anything hardware related at the moment you > (un)plug something? When I plug in a pendrive: ----------------- start Mar 1 13:06:34 aereo kernel: drivers/usb/input/hid-core.c: input irq status -75 received Mar 1 13:06:34 aereo kernel: hub 1-0:1.0: port 1 disabled by hub (EMI?), re-enabling... Mar 1 13:06:34 aereo kernel: usb 1-1: USB disconnect, address 4 Mar 1 13:06:35 aereo hal.hotplug[27533]: DEVPATH is not set (subsystem input) Mar 1 13:06:35 aereo hal.hotplug[27536]: DEVPATH is not set (subsystem input) Mar 1 13:06:35 aereo kernel: usb 1-1: new low speed USB device using uhci_hcd and address 5 Mar 1 13:06:35 aereo hal.hotplug[27599]: DEVPATH is not set (subsystem input) Mar 1 13:06:35 aereo kernel: input: USB HID v1.10 Keyboard [1267:0103] on usb-0000:00:1d.0-1 Mar 1 13:06:35 aereo hal.hotplug[27647]: DEVPATH is not set (subsystem input) Mar 1 13:06:35 aereo kernel: input: USB HID v1.10 Device [1267:0103] on usb-0000:00:1d.0-1 Mar 1 13:06:41 aereo kernel: usb 4-4: new high speed USB device using ehci_hcd and address 5 Mar 1 13:06:42 aereo kernel: Initializing USB Mass Storage driver... Mar 1 13:06:42 aereo kernel: scsi0 : SCSI emulation for USB Mass Storage devices Mar 1 13:06:42 aereo kernel: usbcore: registered new driver usb-storage Mar 1 13:06:42 aereo kernel: USB Mass Storage support registered. Mar 1 13:06:47 aereo kernel: Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.04 Mar 1 13:06:47 aereo kernel: Type: Direct-Access ANSI SCSI revision: 00 Mar 1 13:06:47 aereo kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Mar 1 13:06:48 aereo scsi.agent[27863]: disk at /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/host0/target0:0:0/0:0:0:0 Mar 1 13:06:49 aereo kernel: SCSI device sda: 1001472 512-byte hdwr sectors (513 MB) Mar 1 13:06:49 aereo kernel: sda: Write Protect is off Mar 1 13:06:49 aereo kernel: sda: assuming drive cache: write through Mar 1 13:06:49 aereo kernel: SCSI device sda: 1001472 512-byte hdwr sectors (513 MB) Mar 1 13:06:49 aereo kernel: sda: Write Protect is off Mar 1 13:06:49 aereo kernel: sda: assuming drive cache: write through Mar 1 13:06:49 aereo kernel: /dev/scsi/host0/bus0/target0/lun0: p1 Mar 1 13:06:49 aereo kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 ----------------- end What's more, hal-devies shows (among other non-relevant output like HID etc): ----------------- start 3: udi = '/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE_if0' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 1 (0x1) (int) info.product = 'USB Mass Storage Interface' (string) usb.interface.protocol = 80 (0x50) (int) usb.interface.subclass = 6 (0x6) (int) usb.interface.class = 8 (0x8) (int) usb.interface.number = 0 (0x0) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0' (string) usb.configuration_value = 1 (0x1) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_subclass = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.vendor_id = 2352 (0x930) (int) usb.product_id = 25907 (0x6533) (int) usb.vendor = 'Toshiba Corp.' (string) usb.product = 'USB Mass Storage Interface' (string) usb.device_revision_bcd = 256 (0x100) (int) usb.max_power = 200 (0xc8) (int) usb.num_ports = 0 (0x0) (int) usb.linux.device_number = 5 (0x5) (int) usb.serial = '0E41D850838288EE' (string) usb.speed_bcd = 294912 (0x48000) (int) usb.version_bcd = 512 (0x200) (int) usb.is_self_powered = false (bool) usb.can_wake_up = false (bool) usb.bus_number = 4 (0x4) (int) info.bus = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0' (string) 4: udi = '/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE' info.udi = '/org/freedesktop/Hal/devices/usb_device_930_6533_0E41D850838288EE' (string) linux.subsystem = 'usb' (string) linux.hotplug_type = 1 (0x1) (int) usb_device.bus_number = 4 (0x4) (int) usb_device.can_wake_up = false (bool) usb_device.is_self_powered = false (bool) usb_device.version_bcd = 512 (0x200) (int) usb_device.speed_bcd = 294912 (0x48000) (int) usb_device.serial = '0E41D850838288EE' (string) usb_device.linux.device_number = 5 (0x5) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.max_power = 200 (0xc8) (int) usb_device.device_revision_bcd = 256 (0x100) (int) info.product = 'DataTraveler 2.0' (string) usb_device.product = 'DataTraveler 2.0' (string) info.vendor = 'Toshiba Corp.' (string) usb_device.vendor = 'Toshiba Corp.' (string) usb_device.product_id = 25907 (0x6533) (int) usb_device.vendor_id = 2352 (0x930) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.device_class = 0 (0x0) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.configuration_value = 1 (0x1) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4' (string) info.linux.driver = 'usb' (string) info.bus = 'usb_device' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb4/4-4' (string) ----------------- end However, media:/ doesn't get updated anyway! :( -- tomasz k. jarzynka / 601 706 601 / tomee(a-t)kadu(d-o-t)net "Stany Zjednoczone w żadnym razie nie wspierają się na doktrynie chrześcijańskiej. (Jerzy Waszyngton)" ___________________________________________________ This message is from the kde-linux mailing list. Account management: https://mail.kde.org/mailman/listinfo/kde-linux. Archives: http://lists.kde.org/. More info: http://www.kde.org/faq.html.