[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-linux
Subject: Re: [kde-linux] OT configuring ALSA
From: Henry Holland Simms <hollandsimms () charter ! net>
Date: 2004-10-24 8:58:09
Message-ID: 417B6EA1.2000803 () charter ! net
[Download RAW message or body]
Thankyou for that information and yor consideration for posting this
information.I will give this a try.
Thankyou,
Holland
> Henry Holland Simms wrote:
>
> > I have used Mandrake since building my 'puter.However I started with
> > 8.2 powerpack then 9.1 then 10.0 and 10.1 I cannot get my sound to
> > work and it is hit or miss on keeping the printer going with
> > 10-10.1.It has been very frustrating as I have been trying to get
> > sound since July,to no avail many mandrake'experts tell me that my
> > audigy card is not supported yet it worked on 8.2 and 9.1.I have 3
> > harddrives each with a different distro of mandrake.It also seems
> > that 8.2 was better at getting RPM's loaded as under 10 I load the
> > RPM's and then get dependency failure notices.8.2 seemed to warn you
> > before or ask permission to load what it needed.I am very
> > didinchantedI had hoped for an alternative to MSXP. Mandrake 8.2 with
> > a later mozilla would be better for me than any subsequent mandrake
> > distro.I personally cannot tell if kernal2.6 is much of an advance
> > over 2.4 and my investment in mandrake 10 and services has been a
> > waste of time and nervous energy,not to mention audigy EX platinum
> > and a high-end THX speaker set-up.
>
>
> This is probably an example of the problem with distros.
>
> They try to make things simple, but these things are not complicated
> to begin with, and if the simplification doesn't work, your are out of
> luck.
>
> Getting ALSA to work is a matter of having the correct stuff in your:
> "/etc/modules.conf" file. This is simple to do, you just copy and
> paste from the ALSA web site:
>
> IIUC, this is what you need for your sound card:
>
> http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=Creative+Labs&card=Sound+Blaster+Audigy2+ZS+Value.&chip=emu10k2%2C+P17&module=emu10k1 \
>
>
> # ALSA portion
> alias char-major-116 snd
> alias snd-card-0 snd-emu10k1
> # module options should go here
>
> # OSS/Free portion
> alias char-major-14 soundcore
> alias sound-slot-0 snd-card-0
>
> # card #1
> alias sound-service-0-0 snd-mixer-oss
> alias sound-service-0-1 snd-seq-oss
> alias sound-service-0-3 snd-pcm-oss
> alias sound-service-0-8 snd-seq-oss
> alias sound-service-0-12 snd-pcm-oss
>
> --
> JRT
> ___________________________________________________
> This message is from the kde-linux mailing list.
> Account management: https://mail.kde.org/mailman/listinfo/kde-linux.
> Archives: http://lists.kde.org/.
> More info: http://www.kde.org/faq.html.
>
___________________________________________________
This message is from the kde-linux mailing list.
Account management: https://mail.kde.org/mailman/listinfo/kde-linux.
Archives: http://lists.kde.org/.
More info: http://www.kde.org/faq.html.
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic