[prev in list] [next in list] [prev in thread] [next in thread]
List: kde-devel
Subject: Re: Problem compiling
From: Andy <andy () vlaamse-kern ! com>
Date: 2005-02-13 20:05:59
Message-ID: 200502132105.59625.andy () vlaamse-kern ! com
[Download RAW message or body]
Hi Parag
Thank you for your help. I set the paths and all that and was checking
something and I found out that kded was still linked to my old qt.
Since kded is part of the kdebase I began to doubt wether or not I forgot to
do a make install on it. So I did anyway. After that ldd kded shows linkage
to the new qt. So I start KDE and BINGO! it works again.
With kind regards
Andy
On Sun February 13 2005 20:23, Parag Warudkar wrote:
> Hi Andy
> You should compile in this order -
> 1) qt-copy
> 2) arts
> 3) kdelibs
> 4) kdebase
> 5) other stuff
>
> Then in /etc/profile or some appropriate place, set QTDIR to point to
> the newly installed qt-copy directory. Also set KDEDIR to point to where
> ever you installed the new KDE. Set PATH variable to include $QTDIR/bin:
> $KDEDIR/bin in same file.
>
> If you use a Fedora or Redhat system you should be able to set the above
> in /etc/profile.
>
> If you cannot do the above, you can do the following just before you
> type startx (you have to do it each time you do startx)
>
> $ export QTIR=/path/to/qt
> $ export KDEDIR=/path/to/kde
> $ export PATH=$KDEDIR/bin:$QTDIR/bin:$PATH
> $ startx
>
> Parag
>
> On Sun, 2005-02-13 at 19:40 +0100, Andy wrote:
> > Hi all
> >
> > I compiled qt then kdesupport kdelibs kdebase
> >
> > I installed qt in a seperate dir to be able to keep track of it.
> > /qt-copy
> >
> > After system restart the kde desktop loads but without doing anything.
> > When starting in commandline mode I discovered that the QTDIR variable
> > was not set to qt-copy
> >
> > Rather then to find out where to change that I made a symbolic link from
> > my old qt dir to the new one. After that I managed to start kde ONE
> > time. Subsequent starts provoque the same problem as before.
> >
> > I am now forced using gnome until this issue is resolved. Any help is
> > GREATLY appreciated. Thanks
> >
> >
> > With kind regards
> >
> >
> > Andy
> > -------------------------------------------------------------------------
> > -------------------------------------- Feel free to check out these few
> > php utilities that I released under the GPL2 and that are meant for use
> > with a php cli binary:
> > http://www.vlaamse-kern.com/sas/
> >
> > Registered Linux user number 379093
> > -------------------------------------------------------------------------
> > --------------------------------------
> >
> > > > Visit http://mail.kde.org/mailman/listinfo/kde-devel#unsub to
> > > > unsubscribe <<
> > >
> > > Visit http://mail.kde.org/mailman/listinfo/kde-devel#unsub to
> > > unsubscribe <<
--
---------------------------------------------------------------------------------------------------------------
Feel free to check out these few php utilities that I released under the GPL2
and that are meant for use with a php cli binary:
http://www.vlaamse-kern.com/sas/
Registered Linux user number 379093
---------------------------------------------------------------------------------------------------------------
> > Visit http://mail.kde.org/mailman/listinfo/kde-devel#unsub to unsubscribe <<
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic