[prev in list] [next in list] [prev in thread] [next in thread] 

List:       kde-core-devel
Subject:    Problem with 03032000 cvs
From:       Christopher Molnar <molnarc () nebsllc ! com>
Date:       2000-03-04 0:19:25
[Download RAW message or body]

Hello!

Just finished doing a clean compile of the cvs as of 08:00am EST [-5:00],
this was a clean install, no prior pieces of code used and all prior
directories deleted.

When I run startx I get the kdewizard, it goes away, the desktop comes up,
the laptop (apm) icon comes up and sits in the middle of the screen, kde
hangs. Kicker never starts. Here is the output on from the console - I
hope it contains what someone needs to tell me what I messed up!

=====================================================================


XFree86 Version 3.3.5 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: August 23 1999
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.5-22smp i686 [ELF] 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000, ET4000W32,
      ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p,
      ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
      ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10,
      wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202,
      sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530,
      sis620, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl,
      tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi,
      tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660,
      tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388,
      cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd,
      blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228,
      ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440,
      video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek,
      s3_savage, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090,
      NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535,
      ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555,
      ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200,
      p9100, spc8110, i740, i740_pci, Voodoo Banshee, Voodoo3, generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "My Video Card"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) SVGA: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 75.00 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 85.01 Hz. Deleted.
(--) SVGA: Mode "1152x864" needs vert refresh rate of 89.18 Hz. Deleted.
(--) SVGA: Mode "800x600" needs vert refresh rate of 72.19 Hz. Deleted.
(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 77.97 Hz. Deleted.
(--) SVGA: Mode "512x384" needs vert refresh rate of 85.09 Hz. Deleted.
(--) SVGA: Mode "320x240" needs vert refresh rate of 75.14 Hz. Deleted.
(--) SVGA: Mode "400x300" needs vert refresh rate of 72.19 Hz. Deleted.
(--) SVGA: Mode "480x300" needs vert refresh rate of 72.07 Hz. Deleted.
(**) SVGA: Graphics device ID: "My Video Card"
(**) SVGA: Monitor ID: "My Monitor"
(**) FontPath set to "unix/:-1"
(--) SVGA: PCI: Trident CyberBlade/i7/DSTN rev 92, Memory @ 0xf5000000, 0xf4100000
(--) Trident chipset version: 0xf3 (CyberBlade/i7/DSTN)
(--) SVGA: Detected an STN  800x600 Display
(--) SVGA: Revision 92.
(--) SVGA: Using Trident programmable clocks
(--) SVGA: chipset:  cyberblade
(--) SVGA: videoram: 4096k
(**) SVGA: Using 32 bpp, Depth 24, Color weight: 888
(--) SVGA: Maximum allowed dot-clock: 115.000 MHz
(**) SVGA: Mode "800x600": mode clock =  40.000
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: Using Linear Frame Buffer at 0x0f5000000, Size 4MB
Instance kdeinit has no about data
arg[0] = dcopserver
arg[1] = --nosid (0x804c40c)
Pre Launcher, pid = 10739
Opening "dcopserver.la"
DCOPServer, dcop is major opcode 2
Pre Launcher, pid = 10739
Opening "dcopserver.la"
arg[0] = klauncher
Starting klauncher.
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=0)
register 'klauncher'
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=1)
register 'anonymous-10744'
remove connection 'anonymous-10744' (count=1)
Pre Launcher, pid = 10739
DCOPServer: pid = 10740 result = 0
Opening "klauncher.la"
arg[0] = kdesktop
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=1)
register 'kdesktop'
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=2)
register 'anonymous-10746'
Saver window Id: 8388615
kdesktop: Saver Engine disabled
remove connection 'anonymous-10746' (count=2)
Pre Launcher, pid = 10739
DCOPServer: pid = 10740 result = 0
KLauncher: pid = 10744 result = 0
Opening "kdesktop.la"
arg[0] = kded
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=2)
register 'kded'
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=3)
register 'anonymous-10748'
got a databaseChanged signal !
kio (Scheduler): Scheduler has now 1 jobs 0x808a7d0
remove connection 'anonymous-10748' (count=3)
Pre Launcher, pid = 10739
DCOPServer: pid = 10740 result = 0
KLauncher: pid = 10744 result = 0
Launched: kdesktop, pid = 10746 result = 0
Opening "kded.la"
arg[0] = kxmlrpcd
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=3)
register 'kxmlrpcd'
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=4)
register 'anonymous-10750'
remove connection 'anonymous-10750' (count=4)
Pre Launcher, pid = 10739
DCOPServer: pid = 10740 result = 0
KLauncher: pid = 10744 result = 0
Launched: kdesktop, pid = 10746 result = 0
Launched: kded, pid = 10748 result = 0
Opening "kxmlrpcd.la"
arg[0] = kwrited
Could not dlopen library: /opt/kde2/lib/kwrited.so: undefined symbol: addToUtmp
Could not load library! Trying exec....
Exec successfull.
Pre Launcher, pid = 10739
DCOPServer: pid = 10740 result = 0
KLauncher: pid = 10744 result = 0
Launched: kdesktop, pid = 10746 result = 0
Launched: kded, pid = 10748 result = 0
Launched: kxmlrpcd, pid = 10750 result = 0
Launched: kwrited, pid = 10752 result = 0
kdeinit: opened connection to :0.0
kio (Scheduler): Scheduling job
kdesktop: createSlave for file:/home/molnarc/Desktop/
kdesktop: Trying to start kioslave
KLauncher: Got start_service_by_desktop_name('kioslave', ...)
KLauncher: Request start [ name = 'kioslave' ]
args = 1 arg_length = 13
KLauncher: Data from KInit!
arg[0] = kioslave
Could not dlopen library: file not found
Could not load library! Trying exec....
Exec successfull.
KLauncher: Got notification (4) from KInit
KLauncher: kioslave (pid 10755) up and running.
KLauncher: DCOP_Unique, waiting for 'kioslave' to register.
DCOPServer::Got DCOPReplyWait.
DCOPClient: got a DCOPReplyWait opcode.
Instance kcminit has no about data
Instance kwrited has no about data
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=4)
register 'kioslave'
KLauncher: Request done [ name = 'kioslave' , status ='running' ]
DCOPServer::Got DCOPReplyDelayed (from: "klauncher" to: "kdesktop")
DCOPClient: got a DCOPReplyDelayed opcode.
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=5)
register 'anonymous-10755'
requestSlave file <null>
kio (KIOSlave): requestSlave( file, , /tmp/kdesktop.1531664408.slave-socket)
arg[0] = artsd
Could not dlopen library: file not found
Could not load library! Trying exec....
Exec successfull.
Pre Launcher, pid = 10739
DCOPServer: pid = 10740 result = 0
KLauncher: pid = 10744 result = 0
Launched: kdesktop, pid = 10746 result = 0
Launched: kded, pid = 10748 result = 0
Launched: kxmlrpcd, pid = 10750 result = 0
Launched: kwrited, pid = 10752 result = 0
Entering select...
Select done...
KInit: args = 1 arg_length = 13
KInit: Got EXEC 'kioslave' from klauncher
Entering select...
Select done...
KInit: args = 1 arg_length = 10
KInit: Got EXEC 'artsd' from socket
kdeinit: PID 10760 terminated.
KLauncher: Data from KInit!
KLauncher: Got notification (3) from KInit
Launched ok, pid = 10761
SlaveWrapper::SlaveWrapper(... , /tmp/kdesktop.1531664408.slave-socket)
SlaveWrapper: Connected!
kdesktop: PID of slave = 10763
kio (Scheduler): scheduler: job started 0x808a7d0
kio (KIOConnection): pending queue 48
kio (KIOConnection): setting queueOnly to 1
kio (KIOConnection): pending queue 71
remove connection 'anonymous-10755' (count=5)
kdeinit: PID 10755 terminated.
KLauncher: Data from KInit!
KLauncher: Got notification (3) from KInit
QGDict::hashStringKey: Invalid null key
kdesktop: slave has connected to application
kio (KIOConnection): dequeue
kio (KIOConnection): sendnow 48
kio (KIOConnection): read
kio (KIOConnection): read cmd 48
kio (KIOConnection): finished reading cmd 48
kio (kioslave): app said 0
ASSERT: debug output not ended with \n
kio (KIOJob): openConnection( host = )
kio (KIOConnection): sendnow 103
kio (KIOConnection): read
kio (KIOConnection): read cmd 103
kio (KIOConnection): finished reading cmd 103
kdesktop: got answer 103
kio (Scheduler): slave connected
kio (KIOConnection): setting queueOnly to 0
kio (KIOConnection): dequeue
kio (KIOConnection): sendnow 71
kio (KIOConnection): read
kio (KIOConnection): read cmd 71
kio (KIOConnection): finished reading cmd 71
kio (kioslave): app said G
kio_file: =============== LIST /home/molnarc/Desktop/ ===============
kio (KIOConnection): sendnow 11
kio (KIOConnection): read
kio (KIOConnection): read cmd 11
kio (KIOConnection): finished reading cmd 11
kio (KIOJob): dispatch 11
kio (KIOJob): listEntries 7
kio (KIOConnection): sendnow 106
kio (KIOConnection): read
kio (KIOConnection): read cmd 106
kio (KIOConnection): finished reading cmd 106
kio (KIOJob): dispatch 106
kio_file: ============= COMPLETED LIST ============
kio (KIOConnection): sendnow 104
kio_file: =============== BYE ===========
kio (KMimeType): Mime Type finding for '/home/molnarc/Desktop/Applix'
kio (KIOConnection): read
kio (KIOConnection): read cmd 104
kio (KIOConnection): finished reading cmd 104
kio (KIOJob): dispatch 104
kio (KIOJob): Finished [this = 0x80a0e98]
kio (KIOConnection): sendnow 50
kio (KIOConnection): read
kio (KIOConnection): read cmd 50
kio (KIOConnection): finished reading cmd 50
kio (kioslave): app said 2
kio (KIOConnection): sendnow 109
kio (KIOConnection): read
kio (KIOConnection): read cmd 109
kio (KIOConnection): finished reading cmd 109
kio (KIOJob): dispatch 109
kio (Scheduler): slave status
kio (Scheduler): Slave = 0x80a0e98 (PID = 10763) protocol = file host = [None] Not connected
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=5)
register 'klaptopdaemon'
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=6)
register 'anonymous-10762'
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=7)
register 'kicker'
DCOPClient: setup DCOP protocol. Major opcode = 2
new connection (count=8)
register 'anonymous-10764'
warning: audio output not supported in this KDE release
QObject::connect: No such slot laptop_daemon::invokeSetup()
QObject::connect:  (sender name:   'unnamed')
QObject::connect:  (receiver name: 'klaptopdaemon')
remove connection 'anonymous-10762' (count=8)
******want to be 800 56

-----> I pressed CTRL-C here 

xinit:  unexpected signal 2

waiting for X server to shut down Dead connection expected reply, search waitingFor lists...
Found in waitingForReply!.
remove connection 'anonymous-10764' (count=7)
kdeinit: Fatal IO error: client killed
remove connection 'kxmlrpcd' (count=6)
remove connection 'kded' (count=5)
remove connection 'klauncher' (count=4)
remove connection 'kdesktop' (count=3)
remove connection 'klaptopdaemon' (count=2)
remove connection 'kioslave' (count=1)
SynthGenericPlay: audio subsystem init failed
ASError = device /dev/dsp can't be opened (No such device)
Synth_PLAY: deInitialize() called.
SynthGenericPlay: closing audio fd
remove connection 'kicker' (count=0)


Pre Launcher, pid = 10739
DCOPServer: pid = 10740 result = 0
KLauncher: pid = 10744 result = 0
Launched: kdesktop, pid = 10746 result = 0
Launched: kded, pid = 10748 result = 0
Launched: kxmlrpcd, pid = 10750 result = 0
Launched: kwrited, pid = 10752 result = 0
Entering select...
Select done...
KInit: args = 1 arg_length = 13
KInit: Got EXEC 'kioslave' from klauncher
Entering select...
Select done...
Entering select...
Select done...
Entering select...
Select done...
Entering select...
Select done...
Pre Launcher, pid = 10739
Opening "dcopserver.la"

[prev in list] [next in list] [prev in thread] [next in thread]