[prev in list] [next in list] [prev in thread] [next in thread] 

List:       juniper-nsp
Subject:    Re: [j-nsp] SRX3600 or SRX5600 ?
From:       Chen Jiang <ilovebgp4 () gmail ! com>
Date:       2010-11-26 15:04:55
Message-ID: AANLkTimrcoWKZrFpP=kdBJKFktN4Xqyc-P==sp7q-4L7 () mail ! gmail ! com
[Download RAW message or body]

SRX only support inter-chassis HA presently, not intra-chassis HA. So from
HA point of view, SRX3K and SRX5K is same.

On Tue, Nov 16, 2010 at 6:32 AM, Giuliano Cardozo Medalha <
giulianocm@uol.com.br> wrote:

> People,
>
> Hi,
>
> We are looking for a JUNIPER Solution for High End Firewalls.
>
> We are searching for:
>
> - SRX3600
> - SRX5600
>
> Is it possible to configure SRX3600 chassis bundle with complete redundancy
> ?
>
> JUNOS supports for cluster configuration is good ?
>
> Does SRX3600 supports the following ?
>
> - 2 x RE
> - 2 x SCB
> - 2 x NPC
> - 2 x SPC
> - 2 x AC PEM
>
> Or ... its not supporting it ?
>
> Only 5600 will support total redundancy of components at a single chassis ?
>
> Any experience with SRX3600 and SRX5600 ... good or bad ?
>
> Can you please share it with me ?
>
> Thanks a lot,
>
> Giuliano
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



-- 
BR!



           James Chen
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
[prev in list] [next in list] [prev in thread] [next in thread]