[prev in list] [next in list] [prev in thread] [next in thread] 

List:       gentoo-user-de
Subject:    [gentoo-user-de] hotplug/udev Gespann funktioniert nicht mehr
From:       Christoph Dahlen <christoph () dahlen ! org>
Date:       2006-05-20 16:33:39
Message-ID: 1148142819.9930.5.camel () localhost
[Download RAW message or body]

Hallo,

ich wollte gerade mal ein paar Photos von meiner Canon Digital Ixus 40
ziehen (wie ich es schon dutzend Male gemacht habe), als plötzlich
"gthumb --import-photos" nur folgendes meldet:

Ein Fehler trat in der IO-Bibliothek auf ( »Konnte das USB-GerĂ€t nicht
beanspruchen «): Konnte Schnittstelle 0 nicht reservieren (Die Operation
ist nicht erlaubt). Stellen Sie sicher, dass kein
anderes Programm oder Kernelmodul (z.B. sdc2xx, stv680, spca50x) das
GerÀt verwendet und Sie 
Lese- und Schreibrechte fĂŒr das GerĂ€t haben.

Der Fehler scheint tiefer zu liegen, udev meldet:

May 20 18:25:33 localhost udevd[971]: udev_event_run: seq 1646 forked,
pid [18918], 'add' 'usb', 0 seconds old
May 20 18:25:33 localhost udevd-event[18918]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:10.2/usb7/7-1/bus' appeared after 0
loops
May 20 18:25:33 localhost udevd-event[18918]: run_program:
'/sbin/modprobe '
May 20 18:25:33 localhost udevd-event[18918]: run_program:
'/sbin/modprobe' (stderr) 'FATAL: Module  not found.'

*** Die obere Zeile scheint interessant, welches Modul wird da nicht
gefunden, bzw. warum wird das Modul nicht benannt. ***

May 20 18:25:33 localhost udevd-event[18918]: run_program:
'/sbin/modprobe' returned with status 1
May 20 18:25:33 localhost udevd-event[18918]: run_program:
'/sbin/udev_run_hotplugd usb'
May 20 18:25:33 localhost udevd-event[18918]: run_program:
'/sbin/udev_run_hotplugd' returned with status 0
May 20 18:25:33 localhost udevd-event[18918]: run_program:
'/sbin/udev_run_devd usb'
May 20 18:25:33 localhost udevd-event[18918]: run_program:
'/sbin/udev_run_devd' returned with status 0
May 20 18:25:33 localhost udevd-event[18918]: pass_env_to_socket: passed
-1 bytes to socket '/org/kernel/udev/monitor',
May 20 18:25:33 localhost udevd-event[18918]: pass_env_to_socket: passed
191 bytes to socket '/org/freedesktop/hal/udev_event',
May 20 18:25:33 localhost udevd-event[18918]: udev_event_run: seq 1646
finished
May 20 18:25:33 localhost udevd[971]: udev_done: seq 1646, pid [18918]
exit with 1, 0 seconds old
May 20 18:25:33 localhost udevd[971]: udev_event_run: seq 1647 forked,
pid [18931], 'add' 'usb', 0 seconds old
May 20 18:25:33 localhost udevd-event[18931]: wait_for_sysfs: file
'/sys/devices/pci0000:00/0000:00:10.2/usb7/7-1/7-1:1.0/bus' appeared
after 0 loops
May 20 18:25:33 localhost udevd-event[18931]: run_program:
'/sbin/modprobe usb:v04A9p30BFd0001dc00dsc00dp00ic06isc01ip01'
May 20 18:25:33 localhost udevd-event[18931]: run_program:
'/sbin/modprobe' (stderr) 'FATAL: Module
usb:v04A9p30BFd0001dc00dsc00dp00ic06isc01ip01 not found.'
May 20 18:25:33 localhost udevd-event[18931]: run_program:
'/sbin/modprobe' returned with status 1
May 20 18:25:33 localhost udevd-event[18931]: run_program:
'/sbin/udev_run_hotplugd usb'
May 20 18:25:34 localhost udevd-event[18931]: run_program:
'/sbin/udev_run_hotplugd' returned with status 0
May 20 18:25:34 localhost udevd-event[18931]: run_program:
'/sbin/udev_run_devd usb'
May 20 18:25:34 localhost udevd-event[18931]: run_program:
'/sbin/udev_run_devd' returned with status 0
May 20 18:25:34 localhost udevd-event[18931]: pass_env_to_socket: passed
-1 bytes to socket '/org/kernel/udev/monitor',
May 20 18:25:34 localhost udevd-event[18931]: pass_env_to_socket: passed
319 bytes to socket '/org/freedesktop/hal/udev_event',
May 20 18:25:34 localhost udevd-event[18931]: udev_event_run: seq 1647
finished
May 20 18:25:34 localhost udevd[971]: udev_done: seq 1647, pid [18931]
exit with 1, 1 seconds old
May 20 18:25:34 localhost udevd[971]: udev_event_run: seq 1648 forked,
pid [19010], 'add' 'usb_device', 1 seconds old
May 20 18:25:34 localhost udevd-event[19010]: run_program: '/bin/sh -c
'K=usbdev7.4; K=${K#usbdev}; printf bus/usb/%03i/%03i ${K%%.*} ${K#*.}''
May 20 18:25:34 localhost udevd-event[19010]: run_program:
'/bin/sh' (stdout) 'bus/usb/007/004'
May 20 18:25:34 localhost udevd-event[19010]: run_program: '/bin/sh'
returned with status 0
May 20 18:25:34 localhost udevd-event[19010]: udev_rules_get_name: rule
applied, 'usbdev7.4' becomes 'bus/usb/007/004'
May 20 18:25:34 localhost udevd-event[19010]: udev_db_get_device: no db
file to read /dev/.udev/db/class@usb_device@usbdev7.4: No such file or
directory
May 20 18:25:34 localhost udevd-event[19010]: udev_node_add: creating
device node '/dev/bus/usb/007/004', major = '189', minor = '771', mode =
'0644', uid = '0', gid = '0'
May 20 18:25:34 localhost udevd-event[19010]: run_program:
'/sbin/modprobe '
May 20 18:25:34 localhost udevd-event[19010]: run_program:
'/sbin/modprobe' (stderr) 'FATAL: Module  not found.'
May 20 18:25:34 localhost udevd-event[19010]: run_program:
'/sbin/modprobe' returned with status 1
May 20 18:25:34 localhost udevd-event[19010]: run_program:
'/sbin/udev_run_hotplugd usb_device'
May 20 18:25:34 localhost udevd-event[19010]: run_program:
'/sbin/udev_run_hotplugd' returned with status 0
May 20 18:25:34 localhost udevd-event[19010]: run_program:
'/sbin/udev_run_devd usb_device'
May 20 18:25:34 localhost udevd-event[19010]: run_program:
'/sbin/udev_run_devd' returned with status 0
May 20 18:25:34 localhost udevd-event[19010]: pass_env_to_socket: passed
-1 bytes to socket '/org/kernel/udev/monitor',
May 20 18:25:34 localhost udevd-event[19010]: pass_env_to_socket: passed
273 bytes to socket '/org/freedesktop/hal/udev_event',
May 20 18:25:34 localhost udevd-event[19010]: udev_event_run: seq 1648
finished
May 20 18:25:34 localhost udevd[971]: udev_done: seq 1648, pid [19010]
exit with 1, 1 seconds old

Jemand eine Idee?

Gruß,

Christoph

-- 

        Christoph Dahlen (christoph@...)
        http://www.dahlen.org/

["signature.asc" (application/pgp-signature)]
-- 
gentoo-user-de@gentoo.org mailing list


[prev in list] [next in list] [prev in thread] [next in thread]