[prev in list] [next in list] [prev in thread] [next in thread]
List: gentoo-user
Subject: Re: [gentoo-user] Install problem
From: tom () edgeoftheinterweb ! org ! uk
Date: 2004-04-04 11:49:36
Message-ID: 20040404114936.GB7788 () unluckyfool
[Download RAW message or body]
On 0, Ron Keller <rakeller@shaw.ca> wrote:
> I have an older machine I would like to install Gentoo on. The hardware
> in this machine consists of an 80G HD, and AMD K62/500 CPU and a CDROM
> drive.
Sounds fine.
> I downloaded a LiveCD iso (LiveCD-1.4_rc1-r2) and burned it onto a CD.
> The CD boots and starts identifying the hardware. Just after it
> identifies the CDROM drive, the install procedure stalls on a line which
> reads:
That install CD is very very old. It is only a release candidate for
1.4.
Recent CDs that may work live in the
releases/x86/2004.0/livecd/universal.
> Partition Check:
> /dev/ide/host0/bus0/target0/lun0:
I'm not sure why this is happening, nor how to fix it.
> Now, I know that the hard drive works. It's a new drive, and I had no
> problem loading mandrake 7.1 on it. I would just like to put gentoo on
> it instead.
I think the best solution is either to install from an existing distro
(as documented in the handbook) or from a knoppix CD if you have one of
those knocking around (also documented in the handbook). It may also
work fine with the 2004.0 CD.
I'm sorry I can't offer an actual solution.
Regards,
Tom
--
Tom Martin
GPG Public key: http://edgeoftheinterweb.org.uk/files/tom-gpg-public.txt
Key fingerprint = 055F A0F4 D4C6 AD9E 40E8 2EAC 8F92 A284 B5C4 FF89
IRC: slarti] ~ irc.freenode.net
JID: slartibartfast@sucs.org
[Attachment #3 (application/pgp-signature)]
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic