[prev in list] [next in list] [prev in thread] [next in thread]
List: freeradius-users
Subject: Re: Freeradius Load average
From: Alan DeKok <aland () deployingradius ! com>
Date: 2019-04-25 19:21:11
Message-ID: 5E0AB339-E26D-42B3-9915-2DC4D7625D3F () deployingradius ! com
[Download RAW message or body]
On Apr 25, 2019, at 12:54 PM, Bassem Mettichi <mettichi@gmail.com> wrote:
>
> the problem is that when the load average exceeds the value of 50% we
> received more conflicting packets on radiusLog file
> and our freeradius server starts dropping packets that is why iam asking
> you about this however when we disable detail module we don't receive
> conflicting packets.
You have likely set up the detail file with "locking = yes". Change that, and it \
should help.
If you don't have "locking = yes", then the problem is just load. The detail file \
writer isn't optimized for performance. It just writes lines to a file.
This is a common problem with high load systems. You can't just take a stock \
config and expect it to do everything you want at 3K-10K packets/s. You have to \
understand what it's doing, what you need it to do, and configure it accordingly.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic