[prev in list] [next in list] [prev in thread] [next in thread] 

List:       firewalls-gc
Subject:    [1]Firewalls-Digest V6 #37
From:       "Michael Fitz" <michael.fitz () qm ! sprintcorp ! com>
Date:       1997-01-29 12:04:59
[Download RAW message or body]

                      [1]Firewalls-Digest V6 #37                   =
1/29/97

This is an automated response...my Quickmail account is no longer =
operational.  Please resend this message, addressed to my OpenMail =
account (OM). 

Your patience is appreciated as we move to the new system.

------------------------------
Date: 1/27/97 5:39 PM
To: Fitz, Michael
From: Firewalls@GreatCircle.COM

!!! Original message was too large.
!!!
!!! It is contained in the enclosure whose name
!!! is the same as the subject of this message.
!!!
!!! A preview of the message follows:


Firewalls-Digest       Monday, January 27 1997       Volume 06 : Number =
037



In this issue:

        configuring altavista NT firewall
        Re: smap, smtpd, qmail, sendmail, etc.
        Re: How can I protect a Faked email?
        Hunting for a job in Malaysia
        Re: smap, smtpd, qmail, sendmail, etc.
        Re: 3Com NETBuilder
        Good "introduction to infosec" URLs
        Architecture for an organization
        RE: Journalism and security.
        pricing questions on FW list
        Re: some help
        Re: Firewalls-Digest V6 #35
        RE: Journalism and security.
        RE: Journalism and security.
        Re: Journalism and security.
        Virus Scan....
        Hacker Cons
        Virus Scan....
        FIREWALL-1 User authentication problem
        Re: tftp and cisco auto probe?
        Re: Architecture for an organization
        smap, smtpd, qmail, sendmail, etc.
        OFF TOPIC: Looking for SNMP Remote Monitoring Companies
        RE: Journalism and security.
        Cyberguard vs BorderWare
        RFP from a new Security Officer
        Raptor EagleNT Firewall Info
        Re: smap, smtpd, qmail, sendmail, etc.
        Re: Virus Scan....

See the end of the digest for information on subscribing to the Firewalls
or Firewalls-Digest mailing lists and on how to retrieve back issues.

----------------------------------------------------------------------

Date: Mon, 27 Jan 97 11:23:40 +0100
From: Arjo Mukherjee 4663 <mukherje@ebo.dec.com>
Subject: configuring altavista NT firewall

In reference to:

Date: Fri, 24 Jan 1997 13:29:56 -0600 (CST)
From: Jose Luis Delgado <jdelgado@nexus.net.mx>
Subject: Altavista firewall, configuration help!

Hi to everyone!!!

I have a few questions, does anybody can help me?, please?!!

Well, I have installed now, my Altavista firewall for NT version 4.0
and these are my questions:

1.- How I can setup ftp proxy?
i.e.: I need to access the Internet, but, first I need pass throug my 
firewall then VICEVERSA, from Internet to my internal net!


2.- The same like above for Telnet proxy!!

3.- The same for my Web proxy!

4.- How I can configure the: Hand Held Authenticator?
I'm relatively new in Firewalls!
- - -------------------------------------

Do you have  a copy of the  user manual?  If not, try to get it as your
questions can be answered in chapter 3 and section 4.4  However, I know
a few people who have installed this with no documentation needs as it
was very obvious to them - Granted, they knew a little bit about
firewalls.


After the f irewall is installed for the first
time, the fw is active but the proxies are inactive.


1. After the  software is  loaded and the NT machine has been rebooted,
you should have a window (ALTAVISTA FIREWALL) with tabs at the top. 
Select the tab marked "Services" 




Then you will get a list of the different proxies.  At the bottom of
the window, there is a radio box marked SETUP.  You can click on this
and proceed to configure all the proxies.  Or else, you can highlight
the proxy from the list (above in the window) and then select the SETUP
button.

This will lead you to customized windows with all the relevant
questions fro setting up the proxies.  It is quite easy to do and one
can manage to do it without a manual.  HOWEVER, if you have a manual,
take a look at chapter 3, which will lead you through every step of
every proxy.

This should take care of your questions 1-3 (FTP, Telnet, and Web
proxies)

 4. There are many different types of HHA's on the market. 
Can you please specify which one you want to use.  Though many of them =
are
programmed in similar manners, there are a few small vendor specific
differences. 

------------------------------

Date: Mon, 27 Jan 1997 11:05:23 +0000
From: "Robert Black" <r.black@ic.ac.uk>
Subject: Re: smap, smtpd, qmail, sendmail, etc.

On Jan 25,  8:35pm, Richard Bignell wrote:
> Subject: smap, smtpd, qmail, sendmail, etc.
>
> I've had to look carefully at all these options, and some of my =
thoughts (for
> what they are worth) are:
>
> sendmail: what I use but I'm not en

[prev in list] [next in list] [prev in thread] [next in thread]