[prev in list] [next in list] [prev in thread] [next in thread]
List: elecraft
Subject: Re: [Elecraft] Yipes! Front Panel Board
From: k4wtf () ENTERZONE ! NET
Date: 2002-11-30 1:38:55
[Download RAW message or body]
On Fri, 29 Nov 2002, Crashin J wrote:
> When I soldered R16 and R15 to the bottom of the Front Panel Board the pads
> on the other side lifted on the leads completely off the board. Am I in
> trouble over this now? Do I keep on building? Any idea of what I did wrong?
> Why did they lift?
>
> Jerry - NR5A
I didn't disassemble my K2 to look but, you can check yourself. Were
there any traces connected to the pads that lifted?
As for why they lifted, in nearly _every_ case, this is going to be caused
by too long of "dwell time" while you are soldering.
73 de John - K4WTF
K2/100 #2490
_______________________________________________
Elecraft mailing list: Elecraft@mailman.qth.net
You must be a list member to post to the list.
Postings must be plain text (no HTML or attachments).
See: http://mailman.qth.net/mailman/listinfo/elecraft
Elecraft Web Page: http://www.elecraft.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic