[prev in list] [next in list] [prev in thread] [next in thread]
List: cisco-nsp
Subject: [nsp] Cisco-2509 Setup
From: RTS <rts () rdr ! net>
Date: 1998-02-09 18:30:00
[Download RAW message or body]
Hopefully someone here can help this out....
I am setting up a CISCO 2509 for call in users......
It will allow call-in on analog modems...
However, when the caller tries to get authenticated through radius all
the debug screen on Radius shows is a user name of an apostrophe ( ' )
not the actual user name being sent.
aaa new-model
aaa authentication local-override
aaa authentication login default radius
aaa authentication ppp default radius local
aaa authorization exec radius local
aaa authorization network radius local
aaa accounting exec start-stop radius
aaa accounting network start-stop radius
!
!
line 1 8
autoselect during-login
autoselect ppp
script startup default
script reset default
modem InOut
speed 115200
I have later the ip and secret for the radius server put in the config.
ANY IDEAS WOULD BE GREATLY HELPFULL....
Randy
rts@rdr.net
RTS
rts@rdr.net
Director of Operations
Always Looking For A Better Way
Oh Yea...Found a better way....
RaDaR Computer Solutions (rdr.net)
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic