[prev in list] [next in list] [prev in thread] [next in thread]
List: busybox
Subject: Re: How to manually configure ethernet from Busybox
From: Stefan Seyfried <stefan.seyfried () googlemail ! com>
Date: 2019-04-28 17:06:33
Message-ID: 319cb4e6-376a-011c-4dd7-24130dc4218b () message-id ! googlemail ! com
[Download RAW message or body]
Hi Vesta,
Am 20.04.19 um 18:13 schrieb Vesta:
> Hi,
>
> Linux version 2.6.26.5, ARM Linux Kernel on embedded device.
> How to manually set up Ethernet connection from BusyBox v1.10.2 rescue shell (ash)?
JFTR: your issue is not a busybox problem, you probably need to read up
on IPv4 networking basics.
> I mounted the main virtual file systems, then tried:
>
> # ifconfig lo 127.0.0.1
> # ifconfig eth0 hw ether 88:75:56:05:2B:24
> # ifconfig eth0 192.168.15.1 netmask 255.255.255.0 broadcast 192.168.15.255
> # ifconfig eth0 up
> # route add -net 192.168.15.0/24 eth0
> # ifconfig eth0
> eth0 Link encap:Ethernet HWaddr 88:75:56:05:2B:24
> inet addr:192.168.15.1 Bcast:192.168.15.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
> Interrupt:22
>
> # ping 192.168.15.100
> PING 192.168.15.100 (192.168.15.100): 56 data bytes
> From 192.168.15.100 icmp_seq=0 timed out
Everything is fine here, your device is sending out the packets, but not
getting a response...
> ... ...
>
> Device is also unreachable when ping it from computer.
> ping 192.168.15.1
> connect: Network is unreachable
This machine is configured wrong. It does not know how to reach 192.168.15.1
--
Stefan Seyfried
"For a successful technology, reality must take precedence over
public relations, for nature cannot be fooled." -- Richard Feynman
_______________________________________________
busybox mailing list
busybox@busybox.net
http://lists.busybox.net/mailman/listinfo/busybox
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic