[prev in list] [next in list] [prev in thread] [next in thread]
List: ataraid-list
Subject: RE: Ataraid-list digest, Vol 1 #485 - 1 msg
From: Jeff Orthober <ort11 () execpc ! com>
Date: 2003-06-26 17:02:56
[Download RAW message or body]
Hi:
I have an asus board with the 3112 controller and I could not get it to work \
properly in "semi-hardware" raid onfiguration either with RD8 or RD9. I did not \
spend alot of time with it. I can alo see the drives seperate even though the bios \
is configured as raid.
Please let me know if you get this to work, altough I am probably going to install \
an LSI SCSI raid board with SCSI drives.
Thanks
ort11@execpc.com
-----Original Message-----
From: ataraid-list-request@redhat.com [SMTP:ataraid-list-request@redhat.com]
Sent: Thursday, June 26, 2003 11:00 AM
To: ataraid-list@redhat.com
Subject: Ataraid-list digest, Vol 1 #485 - 1 msg
Send Ataraid-list mailing list submissions to
ataraid-list@redhat.com
To subscribe or unsubscribe via the World Wide Web, visit
https://www.redhat.com/mailman/listinfo/ataraid-list
or, via email, send a message with subject or body 'help' to
ataraid-list-request@redhat.com
You can reach the person managing the list at
ataraid-list-admin@redhat.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Ataraid-list digest..."
Today's Topics:
1. silraid init: no array found Why? (Robert Hardy)
--__--__--
Message: 1
Date: Thu, 26 Jun 2003 04:31:55 -0400 (EDT)
From: Robert Hardy <rhardy@webcon.ca>
To: ataraid-list@redhat.com
Subject: silraid init: no array found Why?
Reply-To: ataraid-list@redhat.com
I have a Abit IC7-G with a SI3112 SATA Raid controller on it. I'm trying to
get the silraid driver to recognize my array (A pair of Maxtor SATA 80G)
which I setup in the bios and have test installed Windoze onto.
I tossed silraid.o and ataraid.o from the RedHat 9 dist onto a floppy and
tried to load them once I got booted up using RedHat 9 rescue setup.
While my 3112 controller is recognized during bootup and I can access the
two underlying drives as hdc and hde I cannot get the silraid driver to
load.
When I insmod ataraid and then insmod silraid I get this output:
"driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found"
That shows up around line 455 in the source code but that doesn't really help.
What am I doing wrong here?
I ran for years on my old pdc20276 so I have some experience with ataraid. I
actually recall a simlar problem back at install time there too but I've
forgotten now...
Regards,
Rob
--
---------------------"Happiness is understanding."----------------------
Robert Hardy, B.Eng Computer Systems C.E.O. Webcon Inc.
rhardy <at> webcon <dot> ca GPG Key available (613) 276-7327
--__--__--
_______________________________________________
Ataraid-list mailing list
Ataraid-list@redhat.com
https://www.redhat.com/mailman/listinfo/ataraid-list
End of Ataraid-list Digest
_______________________________________________
Ataraid-list mailing list
Ataraid-list@redhat.com
https://www.redhat.com/mailman/listinfo/ataraid-list
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic