[prev in list] [next in list] [prev in thread] [next in thread] 

List:       kde-bugs-dist
Subject:    [Bug 80461] can't select cdrdao as burning application in copy-mode
From:       Carlos Lorenzo "Matés" <clmates () mundo-r ! com>
Date:       2004-08-31 20:28:10
Message-ID: 20040831202810.29881.qmail () ktown ! kde ! org
[Download RAW message or body]

------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
      
http://bugs.kde.org/show_bug.cgi?id=80461      




------- Additional Comments From clmates mundo-r com  2004-08-31 22:28 -------
I have the same problem but with SVCD Copy, when copying is not posible to use \
crddao, but cdrecord does not copy the SVCD correctly, the application says copy \
succesfull, but the cd is not valid 

here is the log

System
-----------------------
K3b Version:0.11.14 
KDE Version: 3.3.0
QT Version: 3.3.3

cdrecord
-----------------------
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
SCSI buffer size: 64512
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 0
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : 
Vendor_info    : 'TEAC    '
Identifikation : 'DW-224E         '
Revision       : 'A.0F'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009
Profile: 0x0010 
Profile: 0x000A 
Profile: 0x0009 (current)
Profile: 0x0008 
Profile: 0x0002 (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1460224 = 1426 KB
FIFO size      : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using \
                setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
Track 01: data   738 MB        
Total size:      709 MB (70:19.20) = 316440 sectors
Lout start:      710 MB (70:21/15) = 316440 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11607 (97:27/18)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 43409
Starting to write CD/DVD at speed 24 in real TAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Starting new track at sector: 0
Track 01:    0 of  618 MB written.
Track 01:    1 of  618 MB written (fifo 100%) [buf  93%]  12.9x.
Track 01:    2 of  618 MB written (fifo 100%) [buf  98%]   3.9x.
Track 01:    3 of  618 MB written (fifo 100%) [buf  98%]  10.5x.
---- skipped ----
Track 01:  617 of  618 MB written (fifo 100%) [buf  94%]  24.2x.
Track 01:  618 of  618 MB written (fifo 100%) [buf  97%]  26.3x.
Track 01: Total bytes read/written: 648065024/648065024 (316438 sectors).
Writing  time:  297.055s
Average write speed  14.6x.
Min drive buffer fill was 92%
Fixating...
Fixating time:   22.246s
/usr/bin/cdrecord: fifo had 12171 puts and 12171 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 10417 times full, min fill was 48%.
BURN-Free was 4 times used.

cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=0,0,0 speed=24 driveropts=burnfree -clone -eject \
dev=ATAPI:0,0,0 /tmp/kde-clmates/k3b_1.img 

readcd
-----------------------
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Read  speed:  4234 kB/s (CD  24x, DVD  3x).
Write speed:  4234 kB/s (CD  24x, DVD  3x).
TOC len: 59. First Session: 1 Last Session: 1.
01 16 00 A0 00 00 00 00 01 20 00 
01 16 00 A1 00 00 00 00 02 00 00 
01 16 00 A2 00 00 00 00 46 15 0D 
01 16 00 01 00 00 00 00 00 02 00 
01 16 00 02 00 00 00 00 00 08 41 
Lead out 1: 316438
Capacity: 316438 Blocks = 632876 kBytes = 618 MBytes = 648 prMB
Sectorsize: 2048 Bytes
/usr/bin/readcd: Input/output error. read_cd: scsi sendcmd: no error
CDB:  BE 00 00 00 00 00 00 00 00 F8 01 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.000s timeout 40s
/usr/bin/readcd: read 2448 failed
/usr/bin/readcd: read 2448_16 : OK
Copy from SCSI (0,0,0) disk to file '/tmp/kde-clmates/k3b_1.img'
end:    316438
addr:        0 cnt: 53
addr:       53 cnt: 53
addr:      106 cnt: 53
addr:      159 cnt: 53
------- skipped --------
addr:   316251 cnt: 53
addr:   316304 cnt: 53
addr:   316357 cnt: 53
addr:   316410 cnt: 28
addr:   316438
Time total: 423.641sec
Read 756484.59 kB at 1785.7 kB/sec.

readcd comand:
-----------------------
/usr/bin/readcd -v dev=0,0,0 f=/tmp/kde-clmates/k3b_1.img -clone retries=128 \
dev=ATAPI:0,0,0 

copying with cdrdao in a bash works fine

whe have detected the same problem i two diferent computers.


[prev in list] [next in list] [prev in thread] [next in thread]