[prev in list] [next in list] [prev in thread] [next in thread]
List: zebra
Subject: [zebra 1107] how to aggregate in bgpd
From: itojun () iijlab ! net
Date: 1999-07-30 7:37:42
[Download RAW message or body]
In WIDE IPv6 network (3ffe:500::/24) we have no route for
3ffe:500::/24 inside WIDE IPv6 network. Therefore, the pTLA
boundary router needs to make a aggregated route announcement.
How can I do this with current zebra (= 0.75 or anoncvs HEAD branch)?
I have "router bgp xxx; network 3ffe:500::/24", and bgpd has the
following route on "show ipv6 bgp". However, from what I see from
the peer's statistics this does not get advertised to the peer.
>>* 3ffe:500::/24 :: 32768 i
I tried to use
router bgp xxx; aggregate-address xxx
but it looks that it is not implemented yet. I have added reject
route to 3ffe:500::/24 (gateway is loopback interface) by hand and
tried "redistribute static" but it did not work either.
I may be making a terrible mistake as I'm novice with cisco bgp
(I used cisco for rip and ospf only...).
If I can advertise 3ffe:500::/24 to the peer I can switch the routing
daemon from kame bgpd to zebra, so I will be really glad if it works.
Any help would be appreciated.
itojun
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic