[prev in list] [next in list] [prev in thread] [next in thread]
List: zebra
Subject: [zebra 15549] Several problems with zebra 0.93b on linux
From: Stephan von Krawczynski <info () ithnet ! com>
Date: 2002-09-29 22:39:32
[Download RAW message or body]
Hello all,
I came across several problems regarding zebra running under linux, and they look \
like this:
1) Simple replacement of a zebra 0.89a with 0.93b on linux kernel 2.2.21 with routing \
tables does not work at all.
- no interaction with external peers, no error messages whatsoever. bgpd and zebra \
both running, but nothing happens.
- the 0.89a setup enters the routing entries nicely in a separate routing table \
(iproute2-support) with the same config files.
2) Interaction between 0.89a and 0.93b seems broken.
- When setting up a separate router with kernel 2.4.19 and 0.93b I get this when \
trying to open a bgp session to an 0.89a router:
2002/09/30 01:46:41 BGP: BGPd 0.93b starting: vty@2605, bgp@179
2002/09/30 01:46:48 BGP: 10.0.1.1 [Error] bgp_read_packet error: Connection reset by \
peer 2002/09/30 01:46:51 BGP: 10.0.1.1 [Error] bgp_read_packet error: Connection \
reset by peer 2002/09/30 01:46:54 BGP: 10.0.1.1 [Error] bgp_read_packet error: \
Connection reset by peer 2002/09/30 01:46:59 BGP: 10.0.1.1 [Error] bgp_read_packet \
error: Connection reset by peer 2002/09/30 01:47:07 BGP: 10.0.1.1 [Error] \
bgp_read_packet error: Connection reset by peer 2002/09/30 01:47:12 BGP: Terminating \
on signal
I guess this is related to 1), maybe the other peers do not talk to 0.93b either and \
this is why I get no routes.
3) 0.89a on 2.2.21 handles separate routing tables (table-command in zebra.conf). \
This does not work with 0.89a on 2.4.19 kernel. Any hints why?
--
Regards,
Stephan von Krawczynski
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic