[prev in list] [next in list] [prev in thread] [next in thread] 

List:       xfree-xpert
Subject:    [Xpert]ATI + Nvidia: Multihead works but not Xinerama
From:       Ravikiran Rajagopal <ravi () ee ! eng ! ohio-state ! edu>
Date:       2001-04-17 20:28:53
[Download RAW message or body]

Hello,
  I have a multihead setup with a primary NVidia GeForce card and an ATI 
Mach64 card running XFree86 4.0.3 that came with RH7.1. I have basic 
multihead working but Xinerama does not seem to work. Both KDE and 
Enlightenment start up 2 separate instances (one for each head). How do I 
make sure Xinerama is working? Is there something wrong with my configuration?
I tried starting X with both "startx" and "startx +xinerama". In case it is 
important, I have the 2.4.2 kernel on a PIII 500MHz. Please cc to my address 
when replying.

Thanks,
Ravi

Attached is my XFree86.0.log.
Here's my XF86Config-4:

Section "ServerLayout"
        Identifier     "Anaconda Configured"
        Screen      0  "Screen0" 0 0
	Screen		"Second" RightOf "Screen0"
	Option		"xinerama" "on"
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:7100"
    FontPath   "/usr/lib/X11/fonts/misc:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo"
    FontPath   "/usr/share/fonts/default/Type1"
    FontPath   "/opt/local/lib/X11/fonts/jmk"
    FontPath   "/opt/local/lib/X11/fonts/nucleus"
    FontPath   "/opt/local/lib/X11/fonts/freefont"
    FontPath   "/opt/local/lib/X11/fonts/ed"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"

EndSection

Section "Module"
        Load  "GLcore"
        Load  "dbe"
        Load  "extmod"
	Load "fbdevhw"
	Load "pex5"
	Load "dri"
        Load  "glx"
        Load  "pex5"
        Load  "record"
        Load  "xie"
	Load  "freetype"
	Load  "type1"
	Load  "speedo"

EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"

#	Option	"AutoRepeat"	"500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
#	Option	"Protocol"	"Xqueue"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
	Option	"XkbRules"	"xfree86"
	Option	"XkbModel"	"pc105"
	Option	"XkbLayout"	"us"
	#Option	"XkbVariant"	""
	#Option	"XkbOptions"	""
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/psaux"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync   30.0-107.0
        VertRefresh 50.0-160.0

        # -- 1400x1050 --
        # 1400x1050 @ 60Hz, 65.8 kHz hsync
        Modeline "1400x1050"  129   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 70Hz, 76.8 kHz hsync
        Modeline "1400x1050"  151   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 75Hz, 82.3 kHz hsync
        Modeline "1400x1050"  162   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

        # 1400x1050 @ 85Hz, 93.2 kHz hsync
        Modeline "1400x1050"  184   1400 1464 1656 1960
                              1050 1051 1054 1100 +HSync +VSync

EndSection

Section "Monitor"
	Identifier "CM751"
	VendorName "Unknown"
	ModelName  "Unknown"
	HorizSync 30 - 94
	VertRefresh 50 - 160
EndSection

Section "Device"
	Identifier "ATI"
	Driver "ati"
	BoardName "unknown"
	BusID "PCI:0:15:0"
EndSection

Section "Screen"
	Identifier "Second"
	Device "ATI"
	Monitor "CM751"
	DefaultDepth 24
	Subsection "Display"
		Depth 24
		Modes "1024x768"
	EndSubSection
EndSection

Section "Device"
	# no known options
	Identifier   "NVIDIA GeForce 2 (generic)"
        Driver       "nv"
        VendorName   "NVIDIA GeForce 2 (generic)"
        BoardName     "NVIDIA GeForce 2 (generic)"
        
        BusID "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier   "Screen0"
        Device       "NVIDIA GeForce 2 (generic)"
        Monitor      "Monitor0"
	DefaultDepth	24

	Subsection "Display"
        	Depth       24
                Modes       "1280x1024" 
	EndSubsection

EndSection

Section "DRI"
	Mode 0666
EndSection
_______________________________________________
Xpert mailing list
Xpert@XFree86.Org
http://XFree86.Org/mailman/listinfo/xpert

[prev in list] [next in list] [prev in thread] [next in thread]