[prev in list] [next in list] [prev in thread] [next in thread]
List: xen-users
Subject: Re: [Xen-users] openvswitch
From: James Harper <james.harper () bendigoit ! com ! au>
Date: 2012-03-29 9:18:13
Message-ID: 6035A0D088A63A46850C3988ED045A4B18457899 () BITCOM1 ! int ! sbss ! com ! au
[Download RAW message or body]
>
> On Wed, 2012-03-28 at 23:47 +0100, James Harper wrote:
> > I'm testing openvswitch, and am having some problems. I have set up
> > the switch, and created a port called vif-james, and then in my domu
> > config I set vifname=vif-james, but when the interface gets created it
> > doesn't get 'plugged in' to the switch. Is it supposed to work that
> > way?
> >
> > ovs-dpctl doesn't list the port as having a datapath. If I remove the
> > port and re-create it it works fine.
>
> Perhaps you need a "vif-openvswitch" (similar to "vif-bridge") to configure
> the port at create time?
Actually it will still work with vif-bridge with the vswitch brctl compatibility \
layer, but pre-creating the ports and doing it that way is a bit neater. I still \
created a vif-dummy script as it doesn't like having no script.
>
> I'm not sure if "pre-creating" the port as you seem to have done would be
> expected to work but that'd be one for vswitch list I think.
>
It does work for all the other ports (br-lan, br-wan, etc). Maybe I need an extra \
udev rule or something for the vif interfaces.
James
_______________________________________________
Xen-users mailing list
Xen-users@lists.xen.org
http://lists.xen.org/xen-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic