[prev in list] [next in list] [prev in thread] [next in thread]
List: xen-devel
Subject: Re: [Xen-devel] [PATCH v2 0/2] Raspberry Pi 4 support
From: Julien Grall <julien.grall () arm ! com>
Date: 2019-07-31 19:22:56
Message-ID: 9316e710-607d-6bff-0d09-b8b5a4c78355 () arm ! com
[Download RAW message or body]
Hi,
On 7/31/19 1:05 PM, Julien Grall wrote:
> On 29/07/2019 14:19, Stewart Hildebrand wrote:
>> This is a series to enable UART console for Raspberry Pi 4. Note that
>> I'm relying on the firmware to initialize the UART (i.e. enable_uart=1
>> in config.txt), since full UART initialization on this platform
>> requires accessing some registers outside the range specified in the
>> brcm,bcm2835-aux-uart node.
>>
>> I have been able to get Xen+dom0+domUs booting. Tested with Xen 4.12
>> and 4.13-unstable (b4c8a27d5b) and Linux 4.19.y (Raspberry Pi linux
>> tree + a couple of patches). Please see [1] for build instructions and
>> limitations.
>>
>> New in v2:
>> * Drop early printk alias
>> * Set reg-shift and reg-io-width in the Xen driver
>> * Blacklist other aux peripherals in platform settings (spi1, spi2,
>> and a couple of base aux registers)
>>
>> Thanks,
>> Stewart Hildebrand
>> DornerWorks, Ltd
>>
>> [1] https://github.com/dornerworks/xen-rpi4-builder
>>
>> Stewart Hildebrand (2):
>> ns16550: Add compatible string for Raspberry Pi 4
>
> I have committed this patch...
>
>> xen/arm: platform: Add Raspberry Pi platform
> ... this one need an answer regarding the impact on blacklist spi1 and
> spi2.
This patch is now merged as well. Thank you for adding support for the RPI4!
Cheers,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic