[prev in list] [next in list] [prev in thread] [next in thread]
List: wireshark-users
Subject: Re: [Wireshark-users] Adding DSCP column in Wireshark 1.4.0rc1
From: "Keith French" <keithfrench () btconnect ! com>
Date: 2010-06-30 17:38:13
Message-ID: 16C5B75DE855402584AEF222F244C5D9 () HomePC
[Download RAW message or body]
That is a bit better, but the columns now show the hex value, not decimal,
as it did in V1.2.x where the filter used to be:-
ip.dscp.value
The problem seems to have crept in since the filter syntax was changed to:-
ip.dsfield.dscp
Keith French.
--------------------------------------------------
From: "Stig Bjørlykke" <stig@bjorlykke.org>
Sent: Wednesday, June 30, 2010 1:59 PM
To: "Community support list for Wireshark" <wireshark-users@wireshark.org>
Subject: Re: [Wireshark-users] Adding DSCP column in Wireshark 1.4.0rc1
> On Wed, Jun 30, 2010 at 2:45 PM, Keith French <keithfrench@btconnect.com>
> wrote:
>> I have just tried the development release Version 1.5.0-SVN-33383 and
>> that
>> is still the same as 1.4.0rc1, the columns for DSCP & 802.1P COS are
>> still
>> resolved & hence show the full verbose setting for each packet under the
>> column headers. It would be far more useful if this could be unresolved,
>> showing just the decimal value.
>
> Did you try unselect "Show Resolved" in the column pop-up menu?
>
>
> --
> Stig Bjørlykke
> ___________________________________________________________________________
> Sent via: Wireshark-users mailing list <wireshark-users@wireshark.org>
> Archives: http://www.wireshark.org/lists/wireshark-users
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>
> mailto:wireshark-users-request@wireshark.org?subject=unsubscribe
___________________________________________________________________________
Sent via: Wireshark-users mailing list <wireshark-users@wireshark.org>
Archives: http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
mailto:wireshark-users-request@wireshark.org?subject=unsubscribe
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic