[prev in list] [next in list] [prev in thread] [next in thread]
List: wireshark-users
Subject: Re: [Wireshark-users] RTP over UDP not automatically detected
From: "Trevor Tolk" <TTolk () PMCWorld ! com>
Date: 2007-11-29 21:58:38
Message-ID: B5920C0D8568394C8CE4C037984FA5FF01548A33 () pmcex01 ! pacificmunicipal ! com
[Download RAW message or body]
I have a Toshiba phone system and I must manually tell it to decode the
UDP as RTP. I haven't dried the 'Try to decode RTP outside of
conversation' option.
-----Original Message-----
From: wireshark-users-bounces@wireshark.org
[mailto:wireshark-users-bounces@wireshark.org] On Behalf Of Jaap Keuter
Sent: 2007-11-29 10:45
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] RTP over UDP not automatically detected
Hi,
...or you toggle the RTP preference "Try to decode RTP outside of
conversation" to true.
Thanx,
Jaap
maurizio simoni wrote:
> Hi,
>
> RTP is not automatically detected over UDP.
> RTP is recognized only if SDP info is present in signaling messages
> (for example SIP or SAP).
> If SDP is not present (this is the case of IPTV streams) the only way
> to decode RTP is to manually set the UDP payload as RTP.
>
> Same problem for RTCP.
>
> Mau.
>
_______________________________________________
Wireshark-users mailing list
Wireshark-users@wireshark.org
http://www.wireshark.org/mailman/listinfo/wireshark-users
_______________________________________________
Wireshark-users mailing list
Wireshark-users@wireshark.org
http://www.wireshark.org/mailman/listinfo/wireshark-users
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic