[prev in list] [next in list] [prev in thread] [next in thread]
List: wireshark-dev
Subject: Re: [Wireshark-dev] Problem with protocol in udp por 3800
From: Bill Meier <wmeier () newsguy ! com>
Date: 2012-06-20 15:43:34
Message-ID: 4FE1EFA6.4090309 () newsguy ! com
[Download RAW message or body]
On 6/20/2012 10:47 AM, Pedro Fuentes Ortega wrote:
> Yes, the frames are displayed but but aren't dissected by the dissector.
>
Does 'tshark -G decodes | grep "udp\.port"' show your dissector as being
registered on udp.port 3800 ?
If not, then maybe there's something wrong with your code to register
the dissector (assuming that nothing else is registered on that port).
If yes, then maybe your dissector has a problem (or not ...).
The best way to proceed is probably to use a debugger and put a
breakpoint at the start of your dissector to see if the dissector gets
called.
___________________________________________________________________________
Sent via: Wireshark-dev mailing list <wireshark-dev@wireshark.org>
Archives: http://www.wireshark.org/lists/wireshark-dev
Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
mailto:wireshark-dev-request@wireshark.org?subject=unsubscribe
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic