[prev in list] [next in list] [prev in thread] [next in thread]
List: voyage-linux
Subject: Re: [Voyage-linux] Screen resolution in 0.7.5
From: Rainer Stratmann <RainerStratmann () t-online ! de>
Date: 2011-07-13 13:54:15
Message-ID: 201107131554.15542.RainerStratmann () t-online ! de
[Download RAW message or body]
Am Friday 08 July 2011 04:05:55 schrieben Sie:
> Hi,
>
> What hardware are you using? When using VMWare and VirtualBox, I didn't
> see this.
>
> Regards,
> Punky
Here is a dmesg output:
.254432] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.254465] system 00:0c: [mem 0xfc800400-0xfc800fff] has been reserved
[ 0.254500] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.255389] pnp: PnP ACPI: found 13 devices
[ 0.255416] ACPI: ACPI bus type pnp unregistered
[ 0.308919] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.308960] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.308996] pci 0000:00:1c.0: bridge window [mem 0xffc00000-0xffcfffff]
[ 0.309052] pci 0000:00:1c.0: bridge window [mem 0xcfe00000-0xcfefffff
64bit pref]
[ 0.309098] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.309123] pci 0000:00:1c.1: bridge window [io disabled]
[ 0.309154] pci 0000:00:1c.1: bridge window [mem disabled]
[ 0.309183] pci 0000:00:1c.1: bridge window [mem pref disabled]
[ 0.309218] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.309244] pci 0000:00:1c.2: bridge window [io disabled]
[ 0.309274] pci 0000:00:1c.2: bridge window [mem disabled]
[ 0.309303] pci 0000:00:1c.2: bridge window [mem pref disabled]
[ 0.309338] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.309363] pci 0000:00:1c.3: bridge window [io disabled]
[ 0.309394] pci 0000:00:1c.3: bridge window [mem disabled]
[ 0.309423] pci 0000:00:1c.3: bridge window [mem pref disabled]
[ 0.309458] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.309483] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.309514] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.309543] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.309615] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.309652] pci 0000:00:1c.0: setting latency timer to 64
[ 0.309683] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.309717] pci 0000:00:1c.1: setting latency timer to 64
[ 0.309746] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.309780] pci 0000:00:1c.2: setting latency timer to 64
[ 0.309806] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.309840] pci 0000:00:1c.3: setting latency timer to 64
[ 0.309861] pci 0000:00:1e.0: setting latency timer to 64
[ 0.309878] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.309891] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.309904] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.309918] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000fffff]
[ 0.309931] pci_bus 0000:00: resource 8 [mem 0x20000000-0xffffffff]
[ 0.309945] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.309958] pci_bus 0000:01: resource 1 [mem 0xffc00000-0xffcfffff]
[ 0.309972] pci_bus 0000:01: resource 2 [mem 0xcfe00000-0xcfefffff 64bit
pref]
[ 0.309988] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.310001] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.310034] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.310048] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000fffff]
[ 0.310061] pci_bus 0000:05: resource 8 [mem 0x20000000-0xffffffff]
[ 0.310281] NET: Registered protocol family 2
[ 0.310626] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.311679] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.311958] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.312227] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.312257] TCP reno registered
[ 0.312282] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.312324] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.312862] NET: Registered protocol family 1
[ 0.313373] RPC: Registered udp transport module.
[ 0.313402] RPC: Registered tcp transport module.
[ 0.313426] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.313482] pci 0000:00:02.0: Boot video device
[ 1.413042] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?)
01010001
[ 1.413230] PCI: CLS 64 bytes, default 64
[ 1.413405] Trying to unpack rootfs image as initramfs...
[ 1.997324] Freeing initrd memory: 5440k freed
[ 2.007765] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
[ 2.007824] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
[ 2.008117] microcode: Microcode Update Driver: v2.00
<tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.011717] msgmni has been set to 984
[ 2.012792] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
254)
[ 2.012834] io scheduler noop registered
[ 2.012857] io scheduler deadline registered
[ 2.012947] io scheduler cfq registered (default)
[ 2.013399] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.013683] pcieport 0000:00:1c.1: setting latency timer to 64
[ 2.013950] pcieport 0000:00:1c.2: setting latency timer to 64
[ 2.014339] pcieport 0000:00:1c.3: setting latency timer to 64
[ 2.017274] vesafb: framebuffer at 0xd0000000, mapped to 0xdff80000, using
3750k, total 7872k
[ 2.017322] vesafb: mode is 800x600x32, linelength=3200, pages=3
[ 2.017348] vesafb: scrolling: redraw
[ 2.017374] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.058397] Console: switching to colour frame buffer device 100x37
[ 2.095094] fb0: VESA VGA frame buffer device
[ 2.096755] input: Power Button
as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.112039] ACPI: Power Button [PWRB]
[ 2.112923] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.113872] ACPI: Power Button [PWRF]
[ 2.114708] ACPI: acpi_idle registered with cpuidle
[ 2.122512] Monitor-Mwait will be used to enter C-1 state
[ 2.122599] Monitor-Mwait will be used to enter C-2 state
[ 2.122683] Monitor-Mwait will be used to enter C-3 state
[ 2.122707] Marking TSC unstable due to TSC halts in idle
[ 2.350424] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.634301] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.930302] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.015626] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.065352] 00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.099814] Linux agpgart interface v0.103
[ 3.128164] brd: module loaded
[ 3.146276] Uniform Multi-Platform E-IDE driver
[ 3.164587] ide-gd driver 1.18
[ 3.183502] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.204551] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.223206] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.242314] mousedev: PS/2 mouse device common for all mice
[ 3.261762] cpuidle: using governor ladder
[ 3.281834] cpuidle: using governor menu
[ 3.300914] TCP cubic registered
[ 3.317641] NET: Registered protocol family 17
[ 3.334491] Registering the dns_resolver key type
[ 3.351663] Using IPI No-Shortcut mode
[ 3.371205] Freeing unused kernel memory: 336k freed
[ 3.466881] udev[1021]: starting version 164
[ 3.812170] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 3.859286] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[ 3.949111] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 3.969871] ide0: BM-DMA at 0xf0f0-0xf0f7
[ 3.988888] ide1: BM-DMA at 0xf0f8-0xf0ff
[ 4.026090] Probing IDE interface ide0...
[ 4.155559] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.174959] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.194364] r8169 0000:01:00.0: setting latency timer to 64
[ 4.194392] r8169 0000:01:00.0: no MSI. Back to INTx.
[ 4.212718] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xe0482000,
70:71:bc:a4:19:a7, XID 081000c0 IRQ 16
[ 4.375165] usbcore: registered new interface driver usbfs
[ 4.399767] usbcore: registered new interface driver hub
[ 4.418591] usbcore: registered new device driver usb
[ 4.484130] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.588146] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.621324] Probing IDE interface ide1...
[ 5.140380] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.157435] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.177140] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 5.198124] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.198147] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.215444] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 5.249168] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 5.266599] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.287465] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 5.287547] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffe41000
[ 5.314195] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.332342] hub 1-0:1.0: USB hub found
[ 5.338098] libata version 3.00 loaded.
[ 5.349604] hub 1-0:1.0: 8 ports detected
[ 5.370058] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ
23
[ 5.387739] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.387761] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.405146] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 5.425100] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 5.442873] hub 2-0:1.0: USB hub found
[ 5.459612] hub 2-0:1.0: 2 ports detected
[ 5.476539] ata_piix 0000:00:1f.2: version 2.13
[ 5.476575] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
[ 5.493258] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 5.509766] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 5.525992] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 5.527576] scsi0 : ata_piix
[ 5.544141] scsi1 : ata_piix
[ 5.559888] ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq
19
[ 5.576072] ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq
19
[ 5.592046] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 5.607818] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.607839] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.623647] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 5.642123] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 5.658308] hub 3-0:1.0: USB hub found
[ 5.673636] hub 3-0:1.0: 2 ports detected
[ 5.689075] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 5.704550] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.704570] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.704599] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 5.735695] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 5.774152] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 5.790941] hub 4-0:1.0: USB hub found
[ 5.806551] hub 4-0:1.0: 2 ports detected
[ 5.823518] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ
16
[ 5.839764] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.839786] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.855737] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[ 5.875159] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
[ 5.893118] hub 5-0:1.0: USB hub found
[ 5.909348] hub 5-0:1.0: 2 ports detected
[ 5.991367] Initializing USB Mass Storage driver...
[ 6.007621] scsi2 : usb-storage 1-6:1.0
[ 6.023767] usbcore: registered new interface driver usb-storage
[ 6.039882] USB Mass Storage support registered.
[ 6.241105] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 6.510463] input: HID 04d9:1400
as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input2
[ 6.547851] generic-usb 0003:04D9:1400.0001: input,hidraw0: USB HID v1.10
Keyboard [HID 04d9:1400] on usb-0000:00:1d.3-1/input0
[ 6.617733] input: HID 04d9:1400
as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input3
[ 6.659083] generic-usb 0003:04D9:1400.0002: input,hidraw1: USB HID v1.10
Mouse [HID 04d9:1400] on usb-0000:00:1d.3-1/input1
[ 6.702452] usbcore: registered new interface driver usbhid
[ 6.724581] usbhid: USB HID core driver
[ 7.040163] scsi 2:0:0:0: Direct-Access Swissbit unitedCONTRAST 2000
PQ: 0 ANSI: 0 CCS
[ 7.064244] sd 2:0:0:0: [sda] 1960704 512-byte logical blocks: (1.00 GB/957
MiB)
[ 7.089956] sd 2:0:0:0: [sda] Write Protect is off
[ 7.112317] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 7.113460] sd 2:0:0:0: [sda] No Caching mode page present
[ 7.135574] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 7.161956] sd 2:0:0:0: [sda] No Caching mode page present
[ 7.184142] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 7.206893] sda: sda1 sda2
[ 7.233860] sd 2:0:0:0: [sda] No Caching mode page present
[ 7.256262] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 7.278590] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 8.086343] udev[1250]: starting version 164
[ 8.564906] input: Video Bus
as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 8.743452] ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
[ 8.781538] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 8.815428] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.942689] intel_rng: Firmware space is locked read-only. If you can't or
[ 8.942699] intel_rng: don't want to disable this in firmware setup, and if
[ 8.942707] intel_rng: you are certain that your system has a functional
[ 8.942715] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 8.999988] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total,
262144K mappable
[ 9.091450] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 9.167304] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 9.304125] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) ->
IRQ 19
[ 9.819865] [drm] Initialized drm 1.1.0 20060810
[ 9.959066] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.979683] i915 0000:00:02.0: setting latency timer to 64
[ 9.985616] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 10.008717] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 10.029748] [drm] Driver supports precise vblank timestamp query.
[ 10.233273] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.277036] [drm] initialized overlay support
[ 10.514865] checking generic (d0000000 7b0000) vs hw (d0000000 10000000)
[ 10.514887] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing
generic driver
[ 10.537922] fbcon: inteldrmfb (fb1) is primary device
[ 10.560396] fbcon: Remapping primary device, fb1, to tty 1-63
[ 17.706727] fb1: inteldrmfb frame buffer device
[ 17.707317] drm: registered panic notifier
[ 17.708296] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor
0
[ 17.722190] intelfb: Framebuffer driver for Intel(R)
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
[ 17.723733] intelfb: Version 0.9.6
[ 19.909924] r8169 0000:01:00.0: eth0: link down
[ 19.910918] r8169 0000:01:00.0: eth0: link down
[ 22.016531] r8169 0000:01:00.0: eth0: link up
[ 31.640380] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 32.531677] NET: Registered protocol family 10
[ 32.731290] sshd (1949): /proc/1949/oom_adj is deprecated, please
use /proc/1949/oom_score_adj instead.
[ 42.898111] eth0: no IPv6 routers present
>
> On 7/8/2011 4:03 AM, Rainer Stratmann wrote:
> > Hello,
> > When booting the new version 0.7.5 the screen resolution is set to a high
> > resolution, even if an entry in menu.lst says something else.
> > How can I disable that?
> > In my menu.lst there is vga=0x315 (800x600x32bpp) and if there is another
> > resolution in the booting process my software does not work.
> > best regards, Rainer
> >
> >
> > _______________________________________________
> > Voyage-linux mailing list
> > Voyage-linux@list.voyage.hk
> > http://list.voyage.hk/mailman/listinfo/voyage-linux
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic