[prev in list] [next in list] [prev in thread] [next in thread]
List: voyage-linux
Subject: Re: [Voyage-linux] re: Alix 3C3 and LEDs
From: Joel Carter <Joel_Carter () bcit ! ca>
Date: 2008-09-18 21:08:39
Message-ID: OF87C0FCFC.57584C0D-ON882574C8.0073091D-882574C8.00742686 () bcit ! ca
[Download RAW message or body]
[Attachment #2 (multipart/related)]
[Attachment #4 (multipart/alternative)]
[Attachment #6 (text/plain)]
Hi Bart.
I just got my hands on another ALIX3C3 as I hadn't had a chance to try your
suggestion until now. I also have problems compiling your program on Voyage
itself and on Ubuntu. Not sure what packages I need for those C headers,
but I WAS able to compile it on my CentOS 4.5 box. I've attached that for
others. Here's my output from your program:
iopl succeeded
before l_LOCK: [613C] 0
execute : [613C] 0
after l_LOCK: [613C] 0
before h_LOCK: [61BC] 0
execute : [61BC] 0
after h_LOCK: [61BC] 0
before l_INPUT: [6120] F7AF085
execute : [6120] 400000
after l_INPUT: [6120] F7AF085
before l_AUX1: [6110] 3FFDC002
execute : [6110] 400000
after l_AUX1: [6110] 3FFDC002
before l_AUX2: [6114] FFFF0000
execute : [6114] 400000
after l_AUX2: [6114] FFFF0000
before l_OPEN_DRAIN: [6108] FFBF0040
execute : [6108] 40
after l_OPEN_DRAIN: [6108] FFBF0040
before l_OUTPUT: [6104] 3FBDC042
execute : [6104] 40
after l_OUTPUT: [6104] 3FBDC042
before h_INPUT: [61A0] EBFF1400
execute : [61A0] A000000
after h_INPUT: [61A0] EBFF1400
before h_AUX1: [6190] FEFF0100
execute : [6190] A000000
after h_AUX1: [6190] FEFF0100
before h_AUX2: [6194] FFFF0000
execute : [6194] A000000
after h_AUX2: [6194] FFFF0000
before h_OPEN_DRAIN: [6188] F5FF0A00
execute : [6188] A00
after h_OPEN_DRAIN: [6188] F5FF0A00
before h_OUTPUT: [6184] F4FF0B00
execute : [6184] A00
after h_OUTPUT: [6184] F4FF0B00
Disable all leds
before l_PINS: [6100] FFBF0040
execute : [6100] 40
after l_PINS: [6100] FFBF0040
before h_PINS: [6180] FFFF0000
execute : [6180] A00
after h_PINS: [6180] F5FF0A00
Enable led 1
before l_PINS: [6100] FFBF0040
execute : [6100] 400000
after l_PINS: [6100] FFFF0000
Enable led 2
before h_PINS: [6180] F5FF0A00
execute : [6180] 2000000
after h_PINS: [6180] F7FF0800
Enable led 3
before h_PINS: [6180] F7FF0800
execute : [6180] 8000000
after h_PINS: [6180] FFFF0000
It sequences through the LED's a couple times and then leaves them all on.
I then try (as suggested in Voyage README):
To turn off LED:
# echo 0 > /sys/class/leds/alix\:1/brightness
No response. Then:
To turn on LED on ALIX:
# echo 1 > /sys/class/leds/alix\:1/brightness
The first LED turns OFF (opposite to expected).
So it seems like we're getting close - we can turn them all on and then off
but then your program needs to be run again to turn them on again.
This isn't a major priority for me anymore but just wanted to share my
experiences in case someone else was concerned with getting their LED's
operational.
Thanks again, Joel.
(See attached file: testled)
------------------------------------------------------------------------
Joel Carter
Internet Engineering Lab (IEL)
Group for Advanced Information Technology (GAIT)
British Columbia Institute of Technology
http://www.bcit.ca/appliedresearch
e jcarter@bcit.ca
p 604 451-6929
f 604 436-0286
------------------------------------------------------------------------
Bart Jooris
<Bart.Jooris@inte
c.ugent.be> To
Joel Carter <Joel_Carter@bcit.ca>,
Aug 13, 2008 Sancho <sancho@sancho.sk>
07:07 AM cc
voyage-linux@voyage.hk
Subject
Re: [Voyage-linux] re: Alix 3C3 and
LEDs
Hi Joel, Sancho,
Maybe you still have the led problem on the ALIX 3C3?
I Checked the CS5536 datasheet and seems that the chip is not rightly
configured to
use the leds-alix without any reconfig.
on my machines after boot (with still old bios (before July 2008))
led1 was not set as output
led2 was configured as input...
led3 was configured to aux1
see the testled output (check if "before" and "after" differ) on your
machine.
After running testled, leds-alix should work.
Cheers,
Bart Jooris
Researcher
IBBT-IBCN research group-Ghent University
Joel Carter wrote:
> Hi Sancho.
>
> I posed this question awhile ago to the list and never got a
> resolution for getting the LED's working on my 3c3. I have to agree
> that it must be something to do with the different BIOS since I also
> have a 3c1 and just tried it as suggested in the Voyage README and it
> worked perfectly:
>
> $modprobe leds-alix
> $echo 1 > /sys/class/leds/alix\:2/brightness
>
> Joel.
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Voyage-linux mailing list
>Voyage-linux@list.voyage.hk
>http://list.voyage.hk/mailman/listinfo/voyage-linux
>
>
/*
tab:4
* Copyright (c) 2008 Ghent University
* All rights reserved.
*
* @author Bart Jooris
*
* IBBT - IBCN research group - Ghent University
* E-mail: Bart.Jooris intec.UGent.be
* Implementation testleds alix3c3.
* After config of GPIO 6, 25 and 27 (see schematics of ALIX3C3)
* all leds will be disabled
* then every second a led will be enabled
*
* compile with: gcc testled.c -o testled
**/
#define extern static
#include <asm/io.h>
#undef extern
#include <stdio.h>
#include <sys/ioctl.h>
#define CS5536_BASE 0x06100
#define CLEAR_BIT_6 (unsigned long) 0x00400000
#define SET_BIT_6 (unsigned long) 0x00000040
#define CLEAR_BIT_9 (unsigned long) 0x02000000
#define SET_BIT_9 (unsigned long) 0x00000200
#define CLEAR_BIT_11 (unsigned long) 0x08000000
#define SET_BIT_11 (unsigned long) 0x00000800
void wrapped_outl (char info[], long addr, long value) {
printf("\n");
printf("before %20s: [%X] %8X\n", info, addr, inl_p(addr));
printf("execute %20s: [%X] %8X\n", "", addr, value);
outl_p(value,addr);
printf("after %20s: [%X] %8X\n", info, addr, inl_p(addr));
}
int main (int argc, char **argv) {
if (iopl(3)==0) printf("iopl succeeded\n\n");
//-------Begin
config-----------------------------------------------------------
//See Registers of CS5536 @ datasheet p 480-
//Check LOCK
wrapped_outl ("l_LOCK",CS5536_BASE+0x03C,0);
wrapped_outl ("h_LOCK",CS5536_BASE+0x0BC,0);
//config LED 1 (GPIO 6)
//Disable INPUT
wrapped_outl("l_INPUT",CS5536_BASE+0x020,CLEAR_BIT_6);
//Disable AUX 1
wrapped_outl("l_AUX1",CS5536_BASE+0x010,CLEAR_BIT_6);
//Disable AUX 2
wrapped_outl("l_AUX2",CS5536_BASE+0x014,CLEAR_BIT_6);
//Enable open drain
wrapped_outl("l_OPEN_DRAIN",CS5536_BASE+0x008,SET_BIT_6);
//Enable output
wrapped_outl("l_OUTPUT",CS5536_BASE+0x004,SET_BIT_6);
//config LED 2 and 3 (GPIO 25 and 27)
//Disable INPUT
wrapped_outl("h_INPUT",CS5536_BASE+0x0A0,CLEAR_BIT_9 |
CLEAR_BIT_11);
//Disable AUX 1
wrapped_outl("h_AUX1",CS5536_BASE+0x090,CLEAR_BIT_9 |
CLEAR_BIT_11);
//Disable AUX 2
wrapped_outl("h_AUX2",CS5536_BASE+0x094,CLEAR_BIT_9 |
CLEAR_BIT_11);
//Enable open drain
wrapped_outl("h_OPEN_DRAIN",CS5536_BASE+0x088,SET_BIT_9 |
SET_BIT_11);
//Enable output
wrapped_outl("h_OUTPUT",CS5536_BASE+0x084,SET_BIT_9 |
SET_BIT_11);
//-------End of
config-----------------------------------------------------------
printf("Disable all leds\n");
//Disable LED1
wrapped_outl("l_PINS",CS5536_BASE+0x000, SET_BIT_6);
//disable LED 2 and 3
wrapped_outl("h_PINS",CS5536_BASE+0x080, SET_BIT_9 |
SET_BIT_11);
sleep(1);
printf("Enable led 1\n");
//Enable LED1
wrapped_outl("l_PINS",CS5536_BASE+0x000, CLEAR_BIT_6);
sleep(1);
printf("Enable led 2\n");
//Enable LED2
wrapped_outl("h_PINS",CS5536_BASE+0x080, CLEAR_BIT_9);
sleep(1);
printf("Enable led 3\n");
//Enable LED3
wrapped_outl("h_PINS",CS5536_BASE+0x080, CLEAR_BIT_11);
}
[Attachment #7 (text/html)]
<html><body>
<p>Hi Bart.<br>
<br>
I just got my hands on another ALIX3C3 as I hadn't had a chance to try your \
suggestion until now. I also have problems compiling your program on Voyage itself \
and on Ubuntu. Not sure what packages I need for those C headers, but I WAS able to \
compile it on my CentOS 4.5 box. I've attached that for others. Here's my output from \
your program:<br>
<ul><font face="Courier New">iopl succeeded</font><br>
<br>
<br>
<font face="Courier New">before l_LOCK: [613C] 0</font><br>
<font face="Courier New">execute : [613C] 0</font><br>
<font face="Courier New">after l_LOCK: [613C] 0</font><br>
<br>
<font face="Courier New">before h_LOCK: [61BC] 0</font><br>
<font face="Courier New">execute : [61BC] 0</font><br>
<font face="Courier New">after h_LOCK: [61BC] 0</font><br>
<br>
<font face="Courier New">before l_INPUT: [6120] F7AF085</font><br>
<font face="Courier New">execute : [6120] 400000</font><br>
<font face="Courier New">after l_INPUT: [6120] F7AF085</font><br>
<br>
<font face="Courier New">before l_AUX1: [6110] 3FFDC002</font><br>
<font face="Courier New">execute : [6110] 400000</font><br>
<font face="Courier New">after l_AUX1: [6110] 3FFDC002</font><br>
<br>
<font face="Courier New">before l_AUX2: [6114] FFFF0000</font><br>
<font face="Courier New">execute : [6114] 400000</font><br>
<font face="Courier New">after l_AUX2: [6114] FFFF0000</font><br>
<br>
<font face="Courier New">before l_OPEN_DRAIN: [6108] FFBF0040</font><br>
<font face="Courier New">execute : [6108] 40</font><br>
<font face="Courier New">after l_OPEN_DRAIN: [6108] FFBF0040</font><br>
<br>
<font face="Courier New">before l_OUTPUT: [6104] 3FBDC042</font><br>
<font face="Courier New">execute : [6104] 40</font><br>
<font face="Courier New">after l_OUTPUT: [6104] 3FBDC042</font><br>
<br>
<font face="Courier New">before h_INPUT: [61A0] EBFF1400</font><br>
<font face="Courier New">execute : [61A0] A000000</font><br>
<font face="Courier New">after h_INPUT: [61A0] EBFF1400</font><br>
<br>
<font face="Courier New">before h_AUX1: [6190] FEFF0100</font><br>
<font face="Courier New">execute : [6190] A000000</font><br>
<font face="Courier New">after h_AUX1: [6190] FEFF0100</font><br>
<br>
<font face="Courier New">before h_AUX2: [6194] FFFF0000</font><br>
<font face="Courier New">execute : [6194] A000000</font><br>
<font face="Courier New">after h_AUX2: [6194] FFFF0000</font><br>
<br>
<font face="Courier New">before h_OPEN_DRAIN: [6188] F5FF0A00</font><br>
<font face="Courier New">execute : [6188] A00</font><br>
<font face="Courier New">after h_OPEN_DRAIN: [6188] F5FF0A00</font><br>
<br>
<font face="Courier New">before h_OUTPUT: [6184] F4FF0B00</font><br>
<font face="Courier New">execute : [6184] A00</font><br>
<font face="Courier New">after h_OUTPUT: [6184] F4FF0B00</font><br>
<font face="Courier New">Disable all leds</font><br>
<br>
<font face="Courier New">before l_PINS: [6100] FFBF0040</font><br>
<font face="Courier New">execute : [6100] 40</font><br>
<font face="Courier New">after l_PINS: [6100] FFBF0040</font><br>
<br>
<font face="Courier New">before h_PINS: [6180] FFFF0000</font><br>
<font face="Courier New">execute : [6180] A00</font><br>
<font face="Courier New">after h_PINS: [6180] F5FF0A00</font><br>
<font face="Courier New">Enable led 1</font><br>
<br>
<font face="Courier New">before l_PINS: [6100] FFBF0040</font><br>
<font face="Courier New">execute : [6100] 400000</font><br>
<font face="Courier New">after l_PINS: [6100] FFFF0000</font><br>
<font face="Courier New">Enable led 2</font><br>
<br>
<font face="Courier New">before h_PINS: [6180] F5FF0A00</font><br>
<font face="Courier New">execute : [6180] 2000000</font><br>
<font face="Courier New">after h_PINS: [6180] F7FF0800</font><br>
<font face="Courier New">Enable led 3</font><br>
<br>
<font face="Courier New">before h_PINS: [6180] F7FF0800</font><br>
<font face="Courier New">execute : [6180] 8000000</font><br>
<font face="Courier New">after h_PINS: [6180] FFFF0000</font></ul>
<br>
It sequences through the LED's a couple times and then leaves them all on. I then try \
(as suggested in Voyage README):<br> <br>
<font face="Courier New">To turn off LED:<br>
# echo 0 > /sys/class/leds/alix\:1/brightness</font><font size="4" \
face="DANNY"><br> </font><tt><font size="4"><br>
</font></tt>No response. Then:<br>
<br>
<font face="Courier New">To turn on LED on ALIX:<br>
# echo 1 > /sys/class/leds/alix\:1/brightness</font><tt><font size="4"><br>
</font></tt><br>
The first LED turns OFF (opposite to expected).<br>
<br>
So it seems like we're getting close - we can turn them all on and then off but then \
your program needs to be run again to turn them on again. <br> <br>
This isn't a major priority for me anymore but just wanted to share my experiences in \
case someone else was concerned with getting their LED's operational.<br> <br>
Thanks again, Joel.<br>
<i>(See attached file: testled)</i><br>
------------------------------------------------------------------------<br>
Joel Carter<br>
Internet Engineering Lab (IEL)<br>
Group for Advanced Information Technology (GAIT)<br>
British Columbia Institute of Technology<br>
<a href="http://www.bcit.ca/appliedresearch">http://www.bcit.ca/appliedresearch</a><br>
e jcarter@bcit.ca<br>
p 604 451-6929<br>
f 604 436-0286<br>
------------------------------------------------------------------------<br>
<br>
<img width="16" height="16" src="cid:2__=07BBFE5BDFE08F8D8f9e8a93df938690@bcit.ca" \
border="0" alt="Inactive hide details for Bart Jooris \
<Bart.Jooris@intec.ugent.be>">Bart Jooris \
<Bart.Jooris@intec.ugent.be><br> <br>
<br>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr valign="top"><td \
style="background-image:url(cid:3__=07BBFE5BDFE08F8D8f9e8a93df938690@bcit.ca); \
background-repeat: no-repeat; " width="40%"> <ul>
<ul>
<ul>
<ul><b><font size="2">Bart Jooris <Bart.Jooris@intec.ugent.be></font></b><font \
size="2"> </font> <p><font size="2">Aug 13, 2008 07:07 AM</font></ul>
</ul>
</ul>
</ul>
</td><td width="60%">
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr valign="top"><td width="1%"><img width="58" height="1" \
src="cid:4__=07BBFE5BDFE08F8D8f9e8a93df938690@bcit.ca" border="0" alt=""><br> <div \
align="right"><font size="2">To</font></div></td><td width="100%"><img width="1" \
height="1" src="cid:4__=07BBFE5BDFE08F8D8f9e8a93df938690@bcit.ca" border="0" \
alt=""><br> <font size="2">Joel Carter <Joel_Carter@bcit.ca>, Sancho \
<sancho@sancho.sk></font></td></tr>
<tr valign="top"><td width="1%"><img width="58" height="1" \
src="cid:4__=07BBFE5BDFE08F8D8f9e8a93df938690@bcit.ca" border="0" alt=""><br> <div \
align="right"><font size="2">cc</font></div></td><td width="100%"><img width="1" \
height="1" src="cid:4__=07BBFE5BDFE08F8D8f9e8a93df938690@bcit.ca" border="0" \
alt=""><br> <font size="2">voyage-linux@voyage.hk</font></td></tr>
<tr valign="top"><td width="1%"><img width="58" height="1" \
src="cid:4__=07BBFE5BDFE08F8D8f9e8a93df938690@bcit.ca" border="0" alt=""><br> <div \
align="right"><font size="2">Subject</font></div></td><td width="100%"><img width="1" \
height="1" src="cid:4__=07BBFE5BDFE08F8D8f9e8a93df938690@bcit.ca" border="0" \
alt=""><br> <font size="2">Re: [Voyage-linux] re: Alix 3C3 and LEDs</font></td></tr>
</table>
<table border="0" cellspacing="0" cellpadding="0">
<tr valign="top"><td width="58"><img width="1" height="1" \
src="cid:4__=07BBFE5BDFE08F8D8f9e8a93df938690@bcit.ca" border="0" alt=""></td><td \
width="336"><img width="1" height="1" \
src="cid:4__=07BBFE5BDFE08F8D8f9e8a93df938690@bcit.ca" border="0" alt=""></td></tr> \
</table> </td></tr>
</table>
<br>
<tt>Hi Joel, Sancho,<br>
<br>
Maybe you still have the led problem on the ALIX 3C3?<br>
I Checked the CS5536 datasheet and seems that the chip is not rightly <br>
configured to<br>
use the leds-alix without any reconfig.<br>
<br>
on my machines after boot (with still old bios (before July 2008))<br>
<br>
led1 was not set as output<br>
led2 was configured as input...<br>
led3 was configured to aux1<br>
<br>
see the testled output (check if "before" and "after" differ) on \
your <br> machine.<br>
<br>
After running testled, leds-alix should work.<br>
<br>
Cheers,<br>
<br>
Bart Jooris<br>
Researcher<br>
IBBT-IBCN research group-Ghent University<br>
<br>
<br>
<br>
<br>
Joel Carter wrote:<br>
<br>
> Hi Sancho.<br>
><br>
> I posed this question awhile ago to the list and never got a <br>
> resolution for getting the LED's working on my 3c3. I have to agree <br>
> that it must be something to do with the different BIOS since I also <br>
> have a 3c1 and just tried it as suggested in the Voyage README and it <br>
> worked perfectly:<br>
><br>
> $modprobe leds-alix<br>
> $echo 1 > /sys/class/leds/alix\:2/brightness<br>
><br>
> Joel.<br>
><br>
>------------------------------------------------------------------------<br>
><br>
>_______________________________________________<br>
>Voyage-linux mailing list<br>
>Voyage-linux@list.voyage.hk<br>
><a href="http://list.voyage.hk/mailman/listinfo/voyage-linux">http://list.voyage.hk/mailman/listinfo/voyage-linux</a><br>
> <br>
><br>
<br>
/* tab:4<br>
* Copyright (c) 2008 Ghent University <br>
* All rights reserved.<br>
*<br>
* @author Bart Jooris<br>
* <br>
* IBBT - IBCN research group - Ghent University<br>
* E-mail: Bart.Jooris intec.UGent.be<br>
* Implementation testleds alix3c3.<br>
* After config of GPIO 6, 25 and 27 (see schematics of ALIX3C3)<br>
* all leds will be disabled<br>
* then every second a led will be enabled<br>
* <br>
* compile with: gcc testled.c -o testled <br>
**/<br>
<br>
<br>
#define extern static<br>
#include <asm/io.h><br>
#undef extern<br>
#include <stdio.h><br>
#include <sys/ioctl.h><br>
<br>
#define CS5536_BASE 0x06100<br>
#define CLEAR_BIT_6 (unsigned long) 0x00400000<br>
#define SET_BIT_6 (unsigned long) 0x00000040<br>
#define CLEAR_BIT_9 (unsigned long) 0x02000000<br>
#define SET_BIT_9 (unsigned long) 0x00000200<br>
#define CLEAR_BIT_11 (unsigned long) 0x08000000<br>
#define SET_BIT_11 (unsigned long) 0x00000800<br>
<br>
void wrapped_outl (char info[], long addr, long value) {<br>
printf("\n");<br>
printf("before %20s: [%X] %8X\n", info, addr, inl_p(addr));<br>
printf("execute %20s: [%X] %8X\n", "", addr, value);<br>
outl_p(value,addr);<br>
printf("after %20s: [%X] %8X\n", info, addr, inl_p(addr));<br>
}<br>
<br>
int main (int argc, char **argv) {<br>
if (iopl(3)==0) printf("iopl succeeded\n\n");<br>
<br>
//-------Begin config-----------------------------------------------------------<br>
<br>
//See Registers of CS5536 @ datasheet p 480- <br>
<br>
//Check LOCK<br>
wrapped_outl ("l_LOCK",CS5536_BASE+0x03C,0);<br>
wrapped_outl ("h_LOCK",CS5536_BASE+0x0BC,0);<br>
<br>
//config LED 1 (GPIO 6)<br>
//Disable INPUT<br>
wrapped_outl("l_INPUT",CS5536_BASE+0x020,CLEAR_BIT_6);<br>
//Disable AUX 1<br>
wrapped_outl("l_AUX1",CS5536_BASE+0x010,CLEAR_BIT_6);<br>
//Disable AUX 2<br>
wrapped_outl("l_AUX2",CS5536_BASE+0x014,CLEAR_BIT_6);<br>
//Enable open drain<br>
wrapped_outl("l_OPEN_DRAIN",CS5536_BASE+0x008,SET_BIT_6);<br>
//Enable output<br>
wrapped_outl("l_OUTPUT",CS5536_BASE+0x004,SET_BIT_6);<br>
<br>
//config LED 2 and 3 (GPIO 25 and 27)<br>
//Disable INPUT<br>
wrapped_outl("h_INPUT",CS5536_BASE+0x0A0,CLEAR_BIT_9 | \
CLEAR_BIT_11);<br> //Disable AUX 1<br>
wrapped_outl("h_AUX1",CS5536_BASE+0x090,CLEAR_BIT_9 | CLEAR_BIT_11);<br>
//Disable AUX 2<br>
wrapped_outl("h_AUX2",CS5536_BASE+0x094,CLEAR_BIT_9 | CLEAR_BIT_11);<br>
//Enable open drain<br>
wrapped_outl("h_OPEN_DRAIN",CS5536_BASE+0x088,SET_BIT_9 | \
SET_BIT_11);<br> //Enable output<br>
wrapped_outl("h_OUTPUT",CS5536_BASE+0x084,SET_BIT_9 | SET_BIT_11);<br>
<br>
//-------End of config-----------------------------------------------------------<br>
<br>
printf("Disable all leds\n");<br>
//Disable LED1<br>
wrapped_outl("l_PINS",CS5536_BASE+0x000, SET_BIT_6);<br>
//disable LED 2 and 3<br>
wrapped_outl("h_PINS",CS5536_BASE+0x080, SET_BIT_9 | SET_BIT_11);<br>
<br>
sleep(1);<br>
printf("Enable led 1\n");<br>
//Enable LED1<br>
wrapped_outl("l_PINS",CS5536_BASE+0x000, CLEAR_BIT_6);<br>
<br>
sleep(1);<br>
printf("Enable led 2\n");<br>
//Enable LED2<br>
wrapped_outl("h_PINS",CS5536_BASE+0x080, CLEAR_BIT_9);<br>
<br>
sleep(1);<br>
printf("Enable led 3\n");<br>
//Enable LED3<br>
wrapped_outl("h_PINS",CS5536_BASE+0x080, CLEAR_BIT_11);<br>
}<br>
<br>
</tt><br>
</body></html>
["graycol.gif" (image/gif)]
["pic13052.gif" (image/gif)]
["ecblank.gif" (image/gif)]
["=?US-ASCII?B?dGVzdGxlZA==?=" (application/octet-stream)]
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic