[prev in list] [next in list] [prev in thread] [next in thread]
List: usrp-users
Subject: Re: [USRP-users] Setting Registers in the E310 Flowgraph RFNoC block and seeing them change using Ch
From: Martin Braun via USRP-users <usrp-users () lists ! ettus ! com>
Date: 2015-10-26 17:12:15
Message-ID: 562E5EEF.5020404 () ettus ! com
[Download RAW message or body]
On 22.10.2015 15:57, Swanson, Craig wrote:
> Martin, I found the problem. I needed to wait until the python
> script is already running. It seems that the 50Mhz clock based
> signals can trigger even if the python script is running, but the
> radio clock won't. So anything that is based off of the radio clock
> won't trigger until I run the script.
Yes, this is an E310-specific thing. radio_clk comes from the AD9361,
but that doesn't do anything until it's initialized.
M
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic