[prev in list] [next in list] [prev in thread] [next in thread] 

List:       usrp-users
Subject:    Re: [USRP-users] Using two B210 for a 4 antenna receiver
From:       Ian Buckley via USRP-users <usrp-users () lists ! ettus ! com>
Date:       2014-08-28 16:42:26
Message-ID: 2E4C8172-8CC0-418B-B2F3-4393FEE0B543 () ionconcepts ! com
[Download RAW message or body]

Ruben, 
You could lock a pair of B210's to the same 10MHz clock reference but in terms of \
fully aligning the synthesizers etc within the RF section, no, that would have \
                required exposing a proprietary electrical interface between the \
                units.
-Ian 

On Aug 28, 2014, at 9:27 AM, Ruben Merz via USRP-users <usrp-users@lists.ettus.com> \
wrote:

> Dear list,
> Is it possible to use two B210 together (e.g. synchronized) to build a 4 receive \
> antenna receiver? I understand there may be limitations with the bandwidth when \
> using two USB3 connections. But any other expected issue beyond this? Thanks a lot \
> for any feedback, Best
> Ruben
> 
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com


_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com


[prev in list] [next in list] [prev in thread] [next in thread]