[prev in list] [next in list] [prev in thread] [next in thread] 

List:       user-mode-linux-user
Subject:    [uml-user] [RFC PATCH 6/12] SKAS4 - start_up.c preparation
From:       Jeff Dike <jdike () addtoit ! com>
Date:       2008-05-15 20:11:19
Message-ID: 20080515201119.GA12333 () c2 ! user-mode-linux ! org
[Download RAW message or body]

Tidy arch/um/os-Linux/start_up.c in preparation for host SKAS4 testing.
    
There are now explicit variables for disabling any particular host
capability.
    
init_registers is moved out of the skas3 testing because it needs to
happen every time, and the skas3 checks will become optional.

diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index b616e15..e32cede 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -23,6 +23,7 @@
 #include "mem_user.h"
 #include "ptrace_user.h"
 #include "registers.h"
+#include "skas.h"
 #include "skas_ptrace.h"
 
 static int ptrace_child(void)
@@ -142,14 +143,27 @@ static int stop_ptraced_child(int pid, int exitcode, int mustexit)
 }
 
 /* Changed only during early boot */
-int ptrace_faultinfo = 1;
-int ptrace_ldt = 1;
-int proc_mm = 1;
-int skas_needs_stub = 0;
+int ptrace_faultinfo;
+static int disable_ptrace_faultinfo;
+
+int ptrace_ldt;
+static int disable_ptrace_ldt;
+
+int proc_mm;
+static int disable_proc_mm;
+
+int have_switch_mm;
+static int disable_switch_mm;
+
+int skas_needs_stub;
 
 static int __init skas0_cmd_param(char *str, int* add)
 {
-	ptrace_faultinfo = proc_mm = 0;
+	disable_ptrace_faultinfo = 1;
+	disable_ptrace_ldt = 1;
+	disable_proc_mm = 1;
+	disable_switch_mm = 1;
+
 	return 0;
 }
 
@@ -159,15 +173,12 @@ static int __init mode_skas0_cmd_param(char *str, int* add)
 	__attribute__((alias("skas0_cmd_param")));
 
 __uml_setup("skas0", skas0_cmd_param,
-		"skas0\n"
-		"    Disables SKAS3 usage, so that SKAS0 is used, unless \n"
-	        "    you specify mode=tt.\n\n");
+"skas0\n"
+"    Disables SKAS3 and SKAS4 usage, so that SKAS0 is used\n\n");
 
 __uml_setup("mode=skas0", mode_skas0_cmd_param,
-		"mode=skas0\n"
-		"    Disables SKAS3 usage, so that SKAS0 is used, unless you \n"
-		"    specify mode=tt. Note that this was recently added - on \n"
-		"    older kernels you must use simply \"skas0\".\n\n");
+"mode=skas0\n"
+"    Disables SKAS3 and SKAS4 usage, so that SKAS0 is used.\n\n");
 
 /* Changed only during early boot */
 static int force_sysemu_disabled = 0;
@@ -362,7 +373,7 @@ void __init os_early_checks(void)
 
 static int __init noprocmm_cmd_param(char *str, int* add)
 {
-	proc_mm = 0;
+	disable_proc_mm = 1;
 	return 0;
 }
 
@@ -374,7 +385,7 @@ __uml_setup("noprocmm", noprocmm_cmd_param,
 
 static int __init noptracefaultinfo_cmd_param(char *str, int* add)
 {
-	ptrace_faultinfo = 0;
+	disable_ptrace_faultinfo = 1;
 	return 0;
 }
 
@@ -386,7 +397,7 @@ __uml_setup("noptracefaultinfo", noptracefaultinfo_cmd_param,
 
 static int __init noptraceldt_cmd_param(char *str, int* add)
 {
-	ptrace_ldt = 0;
+	disable_ptrace_ldt = 1;
 	return 0;
 }
 
@@ -406,17 +417,15 @@ static inline void check_skas3_ptrace_faultinfo(void)
 
 	n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
 	if (n < 0) {
-		ptrace_faultinfo = 0;
 		if (errno == EIO)
 			non_fatal("not found\n");
 		else
 			perror("not found");
-	}
+	} else if (disable_ptrace_faultinfo)
+		non_fatal("found but disabled on command line\n");
 	else {
-		if (!ptrace_faultinfo)
-			non_fatal("found but disabled on command line\n");
-		else
-			non_fatal("found\n");
+		ptrace_faultinfo = 1;
+		non_fatal("found\n");
 	}
 
 	stop_ptraced_child(pid, 1, 1);
@@ -442,35 +451,28 @@ static inline void check_skas3_ptrace_ldt(void)
 		else {
 			perror("not found");
 		}
-		ptrace_ldt = 0;
-	}
+	} else if (disable_ptrace_ldt)
+		non_fatal("found, but use is disabled\n");
 	else {
-		if (ptrace_ldt)
-			non_fatal("found\n");
-		else
-			non_fatal("found, but use is disabled\n");
+		ptrace_ldt = 1;
+		non_fatal("found\n");
 	}
 
 	stop_ptraced_child(pid, 1, 1);
-#else
-	/* PTRACE_LDT might be disabled via cmdline option.
-	 * We want to override this, else we might use the stub
-	 * without real need
-	 */
-	ptrace_ldt = 1;
 #endif
 }
 
 static inline void check_skas3_proc_mm(void)
 {
 	non_fatal("  - /proc/mm...");
-	if (access("/proc/mm", W_OK) < 0) {
-		proc_mm = 0;
+	if (access("/proc/mm", W_OK) < 0)
 		perror("not found");
-	}
-	else if (!proc_mm)
+	else if (disable_proc_mm)
 		non_fatal("found but disabled on command line\n");
-	else non_fatal("found\n");
+	else {
+		proc_mm = 1;
+		non_fatal("found\n");
+	}
 }
 
 void can_do_skas(void)

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft 
Defy all challenges. Microsoft(R) Visual Studio 2008. 
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
User-mode-linux-user mailing list
User-mode-linux-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-user
[prev in list] [next in list] [prev in thread] [next in thread]