[prev in list] [next in list] [prev in thread] [next in thread]
List: uclinux-dev
Subject: Re: [uClinux-dev] Problem:Spurious Interrupt on
From: Greg Ungerer <gerg () snapgear ! com>
Date: 2009-11-25 23:49:28
Message-ID: 4B0DC288.7010406 () snapgear ! com
[Download RAW message or body]
Hi Vinod,
Vinod Nagare wrote:
> I am using a custom build board using MCF5485 and uClinux 2.4.x ported
> on it. I am using General Purpose Timer (GPT), which is generating
> interrupts to CPU and an ISR is connected to this interrupt.
>
> When the timer is configured to generate interrupt for period 100ms the
> ISR is invoked every 100ms and functions properly.
>
> But when I configurs timer (GPT) to generate interrupt every 10ms
> following message is printed on console (connected to minicom) and the
> system starves and ISR is not invoked.
>
> Spurious interrupt 4488788
> Spurious interrupt 4289755
> ..........................................
> and such messages are printed continously.....
>
>
> Please help me to solve this problem as I need an ISR to be executed
> every 2ms.
Can you show us the code?
Regards
Greg
------------------------------------------------------------------------
Greg Ungerer -- Principal Engineer EMAIL: gerg@snapgear.com
SnapGear Group, McAfee PHONE: +61 7 3435 2888
8 Gardner Close FAX: +61 7 3217 5323
Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic