[prev in list] [next in list] [prev in thread] [next in thread]
List: uclinux-dev
Subject: Re: [uClinux-dev] Hacking the Actiontec Dual PC Modem Router
From: "Greg Holdren" <greghol () sbcglobal ! net>
Date: 2003-08-30 1:31:53
[Download RAW message or body]
> On the Humber board you can swap out the flash, not so easy on this
> board :-( That 10 ping header might be the OCD debugger interface,
> pretty standard for ARM cores. Might be an option with an OCD pod
> (from MacCraigor or others).
Darn, BGA. Hard to trace back to the pins. I can program in Solder (SMT).
48 pin TSOP socket on this in about 30 mins. :)
Most likely JTAG and the high density pads are the ETM (Extended Trace
Module) interface.
>
> The 82100 doesn't have a built in serial port, so there may be no
> "normal" console at all on this (I can't see any other UART on it).
>
Yuck, joy! :(
greg
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic