[prev in list] [next in list] [prev in thread] [next in thread]
List: uclinux
Subject: Re[2]: [UCLINUX] LM32019T LCD unit
From: byonic () gmx ! net
Date: 2001-01-22 17:31:50
[Download RAW message or body]
Hello Tom,
Monday, January 22, 2001, 4:43:35 PM, you wrote:
TW> The LM32019T is a Sharp LM32019 display with a Touch Glass bonded to
TW> it. These LCD's are raster devices which contain a set of shift
TW> registers for the column drivers and have a row counter / driver. A
TW> digital data stream is "pumped" into it using the Data & Clock lines.
TW> This data stream contains the pixels for one row, you have to
TW> continuously pump each row of data into the device to build an image
TW> Frame. These Frames must be "refreshed" at a 75Hz rate.
TW> This is a purely graphics display, it is not a display that is
TW> interfaced with an RS232 serial port, nor a parallel printer port. The
TW> display can only be used with an LCD controller. Microprocessors such
TW> as the MC68EZ328 contain an integrated LCD controller. This is the
TW> Sharp data sheet on the LCD:
TW> 'http://www.openhardware.net/ez328simm/technotes/Sharp-LM32019.pdf'
TW> TomW
Thank you very much for the information, I understand the LM32019T
better now and I think that I'll manage to "run" these unit now.
--
Best regards,
byonic mailto:byonic@gmx.net
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic