[prev in list] [next in list] [prev in thread] [next in thread]
List: uclibc
Subject: [PATCH 2/4] MIPS: remove sub-arch/variants selection from menuconfig
From: yann.morin.1998 () anciens ! enib ! fr (Yann E ! MORIN)
Date: 2010-01-25 20:49:27
Message-ID: 1264452569-25137-3-git-send-email-yann.morin.1998 () anciens ! enib ! fr
[Download RAW message or body]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998 at anciens.enib.fr>
---
Rules.mak | 7 -------
extra/Configs/Config.mips | 42 ------------------------------------------
2 files changed, 0 insertions(+), 49 deletions(-)
diff --git a/Rules.mak b/Rules.mak
index c0c6c6b..859377f 100644
--- a/Rules.mak
+++ b/Rules.mak
@@ -327,13 +327,6 @@ endif
ifeq ($(TARGET_ARCH),mips)
OPTIMIZATIONS+=-mno-split-addresses
- CPU_CFLAGS-$(CONFIG_MIPS_ISA_1)+=-mips1
- CPU_CFLAGS-$(CONFIG_MIPS_ISA_2)+=-mips2 -mtune=mips2
- CPU_CFLAGS-$(CONFIG_MIPS_ISA_3)+=-mips3 -mtune=mips3
- CPU_CFLAGS-$(CONFIG_MIPS_ISA_4)+=-mips4 -mtune=mips4
- CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS32)+=-mips32 -mtune=mips32
- CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS32R2)+=-march=mips32r2 -mtune=mips32r2
- CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS64)+=-mips64 -mtune=mips32
ifeq ($(strip $(ARCH_BIG_ENDIAN)),y)
CPU_LDFLAGS-$(CONFIG_MIPS_N64_ABI)+=-Wl,-melf64btsmip
CPU_LDFLAGS-$(CONFIG_MIPS_O32_ABI)+=-Wl,-melf32btsmip
diff --git a/extra/Configs/Config.mips b/extra/Configs/Config.mips
index 063b07c..8e580c6 100644
--- a/extra/Configs/Config.mips
+++ b/extra/Configs/Config.mips
@@ -29,45 +29,3 @@ config CONFIG_MIPS_N64_ABI
bool "N64 ABI"
endchoice
-
-choice
- prompt "Target Processor Architecture"
- default CONFIG_MIPS_ISA_1 if CONFIG_MIPS_O32_ABI
- default CONFIG_MIPS_ISA_3 if CONFIG_MIPS_N32_ABI
- default CONFIG_MIPS_ISA_3 if CONFIG_MIPS_N64_ABI
- help
- This selects the instruction set architecture of your MIPS CPU. This
- information is used for optimizing purposes. To build a library that
- will run on any MIPS CPU, you can specify "Generic (MIPS I)" here.
- If you pick anything other than "Generic (MIPS I)," there is no
- guarantee that uClibc will even run on anything other than the
- selected processor type.
-
- You should probably select the MIPS ISA that best matches the
- CPU you will be using on your device. uClibc will be tuned
- for that architecture.
-
- If you don't know what to do, choose "Generic (MIPS I)"
-
-config CONFIG_MIPS_ISA_1
- bool "Generic (MIPS I)"
-
-config CONFIG_MIPS_ISA_2
- bool "MIPS II"
-
-config CONFIG_MIPS_ISA_3
- bool "MIPS III"
-
-config CONFIG_MIPS_ISA_4
- bool "MIPS IV"
-
-config CONFIG_MIPS_ISA_MIPS32
- bool "MIPS32"
-
-config CONFIG_MIPS_ISA_MIPS32R2
- bool "MIPS32r2"
-
-config CONFIG_MIPS_ISA_MIPS64
- bool "MIPS64"
-
-endchoice
--
1.6.5
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic