[prev in list] [next in list] [prev in thread] [next in thread] 

List:       u-boot
Subject:    Re: [U-Boot] fw_printenv (uboot2011.12) 'Warning: Bad CRC, using default environment'
From:       Andreas_Bießmann <andreas.devel () googlemail ! com>
Date:       2013-07-31 16:51:17
Message-ID: 51F94085.1050802 () googlemail ! com
[Download RAW message or body]

Dear Andy Neubi,

On 31.07.13 15:26, Andy Neubi wrote:
> hi,
> i'm using the uboot-tools (fw_printenv) to readout the env-settings of my \
> beagleboard-XM uboot. unfortunately i always getthe 'Warning: Bad CRC, using \
> default environment' msg

please configure your MUA to wrap at about 78 chars

> [root@buildroot ~]# cat /proc/mtd
> dev:    size   erasesize  name
> mtd0: 00080000 00020000 "X-Loader"
> mtd1: 001e0000 00020000 "U-Boot"
> mtd2: 00020000 00020000 "U-Boot Env"
> mtd3: 00800000 00020000 "Kernel"
> mtd4: 00800000 00020000 "Kernel Backup Partition"
> mtd5: 0ed80000 00020000 "File System"
> 

Next seems to be /etc/fw_env.config

> # MTD device name       Device offset   Env. size       Flash sector size
> /dev/mtd2              0x0000          0x20000          0x20000

Do you really know the env size is the same as the sector size?
Sometimes one define a smaller space for faster reading.
Have you tried to dd the mtd2 into an file and investigate it (the env
structure is quite simple and should easily be understood when reading
the code).

> [root@buildroot ~]# fw_printenv
> Warning: Bad CRC, using default environment
> bootcmd=bootp; setenv bootargs root=/dev/nfs nfsroot=${serverip}:${rootpath} \
> ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm \
> bootdelay=5 baudrate=115200

(re-formatted for better readability)

That's the 'default env' defined in fw_env.h, not the default env of
your board!

> - uboot-version of my beagleboard is 2013.04- uboot-tools-version under buildroot \
> is 2011.12- ubuntu 13.04 
> Q: what i'm doing wrong?
> 
> -> IMHO so in most cases 2 different uboot versions are not good, so i tried to \
> build the uboot-tools-2013.04 ... unfortunately i always get

That's not true! You can use an older fw_printenv tool to read the
environment of a newer u-boot. The environment format is fix since ages
and will not change cause we want to read an older environment with an
newer u-boot .. so that's obvious.

> uboot-tools-2013.04/lib/crc32.c:14:20: fatal error: common.h: No such file or \
> directory

This means your u-boot is not configured. Somewhere in 2012 a commit
stopped building env target for unconfigured u-boot. There where a lot
of discussion around, unfortunately no solution was found. Maybe your
complaint gives some new input to that.
So a 'make <your board name>_config' before 'make
HOSTCC=${CROSS_COMPILE}gcc env' should solve your issue.

Best regards

Andreas Bießmann
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot


[prev in list] [next in list] [prev in thread] [next in thread]