[prev in list] [next in list] [prev in thread] [next in thread] 

List:       u-boot
Subject:    [U-Boot-Users] Download U-Boot in RAM on Memec Board
From:       andreas_schmidt () ifm-electronic ! com (andreas_schmidt at ifm-electronic ! com)
Date:       2005-04-26 7:51:33
Message-ID: OF3DB94577.CEFBA0F5-ONC1256FEF.002A45BC-C1256FEF.002B2BE9 () ifm-electronic ! com
[Download RAW message or body]

Hei at all

I have comiled u-boot and want to download the u-boot in RAM on Memec Evaluation Board.
The board has 64K RAM and address is 0x00000000 to 0x03FFFFFF.

When i use the commands described in examples e.g.
xmd> ppcconnect
xmd> dow uboot.elf
xmd> run
the xmd begins to download at address 0x04000000 !!! and at the console I get information
on which addresses the sectors were placed.

When i use the command with explicit address giving
xmd> ppcconnect
xmd> dow uboot.elf 0x00000000
xmd> run
the xmd begins to download but i got no information at xmd console but no error, too.

In both variants I get no connection at RS232(this is next problem) but this is perhaps
another problem.

What kind of dow command I must use?

best regards,

Andreas Schmidt




[prev in list] [next in list] [prev in thread] [next in thread]