[prev in list] [next in list] [prev in thread] [next in thread]
List: u-boot
Subject: [U-Boot-Users] Patch: PCI mode indication for PQ2FADS-ZU
From: wd () denx ! de (Wolfgang Denk)
Date: 2003-08-31 19:24:57
Message-ID: 20030831192502.744F4C59E4 () atlas ! denx ! de
[Download RAW message or body]
In message <16178.7781.912832.378900 at gargle.gargle.HOWL> you wrote:
>
> According to the MPC8260 User's Manual, PCI_MODE signal should be
> reflected in SCCR register, and local bus pins configuration is taken
> from HRCW and appears in SIUMCR. For some reason it does not work this
> way, so the only possibility to detect if the board is configured in PCI
> mode is to check the BCSR. The attached patch sets SCCR and SIUMCR
> according to the BCSR.
Added, thanks.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de
Celestial navigation is based on the premise that the Earth is the
center of the universe. The premise is wrong, but the navigation
works. An incorrect model can be a useful tool. - Kelvin Throop III
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic