[prev in list] [next in list] [prev in thread] [next in thread]
List: tru64-unix-managers
Subject: Summary: Network Crossover Cable Question
From: George Gallen <ggallen () slackinc ! com>
Date: 2000-12-27 19:30:20
[Download RAW message or body]
The confusion on my part was with the 100BaseT4 having
the 4 5 7 & 8 switched as well.
We arn't using that, so looks Like I'll be straight throughing
them.
Thanks for the quick replies
George
>-----Original Message-----
>From: George Gallen [mailto:ggallen@slackinc.com]
>Sent: Wednesday, December 27, 2000 2:14 PM
>To: 'tru64-unix-managers@ornl.gov'
>Subject: Network Crossover Cable Question
>
>
>I'm in the process of making a cross-over cable. The pinouts I have.
>
>I see that for 10BT there is only switching of 1,2,3, & 6
>and for the 100BT 4,5,7 & 8 join in on the fun
>
>Then I found a site that for a 10/100BT to use the 10BT pinout.
>
>Is 4 5 7 8 used in 100BT? I'm going to be going from a 10/100BT
>switched hub to a 10BT hub, the 10/100BT hub is an autosense
>but the 10BT
>is strictly 10BT
>
>Should I switch 4 5 7 & 8 or just switch 1,2,3 & 6 ?
>
>Or is 4 5 7 & 8 for the half/full duplexing?
>
>Oh, this is for a 2100 system running 3.2c
>
>George Gallen
>Senior Programmer/Analyst
>Accounting/Data Division
>ggallen@slackinc.com
>ph:856.848.1000 Ext 220
>
>SLACK Incorporated - An innovative information, education and
>management
>company
>http://www.slackinc.com
>
[prev in list] [next in list] [prev in thread] [next in thread]
Configure |
About |
News |
Add a list |
Sponsored by KoreLogic