'RE: Accessing RLM using PuTTY (ssh) unresponsive'

[prev in list] [next in list] [prev in thread] [next in thread] 

List:       toasters
Subject:    RE: Accessing RLM using PuTTY (ssh) unresponsive
From:       "Mikkelsen Soren" <Soren.Mikkelsen () vcare-it ! com>
Date:       2008-03-11 13:53:22
Message-ID: 3415D0C379655B40A6B151AB80C667E702A7B699 () srv02
[Download RAW message or body]

Dear André,

thanks for your reply.
I will next time at customer site, try out the default settings - most likely I'll \
have to have "Local Line Echo" ON (and not on as in the KB8736 you mention).

I will update the post with the outcome.

Kind regards,
Soren

-----Original Message-----
From: Clark, Andre [mailto:aclark@insightinvestments.com] 
Sent: Tuesday, March 11, 2008 12:53 PM
To: Mikkelsen Soren; toasters@mathworks.com
Subject: RE: Accessing RLM using PuTTY (ssh) unresponsive

Soren,

I received this same condition with a FAS3040 RLM.  What I found out was if using \
Putty Release 0.60, I could use the default settings and not those recommended in \
NetApp KB8736 and I was able to connect to both RLM and normal SSH sessions to the \
controllers.  Try this.


Regards,
André M. Clark | Sr. Consulting Engineer, Team Lead | Insight Integrated Systems | \
718.360.8701 Tell me I will forget... Show me I may remember... Involve me I WILL \
UNDERSTAND!!!



-----Original Message-----
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of \
                slemmesmi
Sent: Tuesday, March 11, 2008 06:27
To: toasters@mathworks.com
Subject: Accessing RLM using PuTTY (ssh) unresponsive


Dear all, 

Have FAS3020 single head running ONTAP 7.0.2 at customer site.
I have no problem using PuTTY ssh to access the CLI of the FAS.

Have configured RLM and it's running fine - 'rlm status' shows:
myfas> rlm status
	Remote LAN Module           Status: Online
		Part Number:        110-00030
		Revision:           C0
		Serial Number:      312392
		Firmware Version:   1.1.0
		Mgmt MAC Address:   00:A0:98:01:EC:FC
		Using DHCP:         no
		IP Address:         192.168.1.20
		Netmask:            255.255.255.0
		Gateway:            192.168.1.1

The RLM responds to ping and I can connect to this without problems using OpenSSH \
(version 3.8.1) from http://sourceforge.net/projects/sshwindows/

However when I try using SSH in PuTTY to connect to the RLM, I get as far as entering \
user and password, then the sessions seams unresponsive and appears to "hang": \
rlmroot@myfasrlm's password: 

When I then press CTRL+D to close the session, I briefly see the RLM prompt:
RLM myfas>

In PuTTY, as template for the ssh session to the RLM (myfasrlm), I use the ssh \
session (myfas) I created for the FAS "normal" ssh access, registry entries for that \
shows the settings:

[HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\Sessions\myfasrlm]
"Present"=dword:00000001
"HostName"="myfasrlm"
"LogFileName"="C:\\Temp\\myfasrlm.log"
"LogType"=dword:00000001
"LogFileClash"=dword:00000000
"LogFlush"=dword:00000001
"SSHLogOmitPasswords"=dword:00000001
"SSHLogOmitData"=dword:00000000
"Protocol"="ssh"
"PortNumber"=dword:00000016
"CloseOnExit"=dword:00000001
"WarnOnClose"=dword:00000001
"PingInterval"=dword:00000000
"PingIntervalSecs"=dword:00000000
"TCPNoDelay"=dword:00000001
"TCPKeepalives"=dword:00000000
"TerminalType"="xterm"
"TerminalSpeed"="38400,38400"
"TerminalModes"="INTR=A,QUIT=A,ERASE=A,KILL=A,EOF=A,EOL=A,EOL2=A,START=A,STOP=A,SUSP=A \
,DSUSP=A,REPRINT=A,WERASE=A,LNEXT=A,FLUSH=A,SWTCH=A,STATUS=A,DISCARD=A,IGNPAR=A,PARMRK \
=A,INPCK=A,ISTRIP=A,INLCR=A,IGNCR=A,ICRNL=A,IUCLC=A,IXON=A,IXANY=A,IXOFF=A,IMAXBEL=A,I \
SIG=A,ICANON=A,XCASE=A,ECHO=A,ECHOE=A,ECHOK=A,ECHONL=A,NOFLSH=A,TOSTOP=A,IEXTEN=A,ECHO \
CTL=A,ECHOKE=A,PENDIN=A,OPOST=A,OLCUC=A,ONLCR=A,OCRNL=A,ONOCR=A,ONLRET=A,CS7=A,CS8=A,PARENB=A,PARODD=A,"
 "AddressFamily"=dword:00000000
"ProxyExcludeList"=""
"ProxyDNS"=dword:00000001
"ProxyLocalhost"=dword:00000000
"ProxyMethod"=dword:00000000
"ProxyHost"="proxy"
"ProxyPort"=dword:00000050
"ProxyUsername"=""
"ProxyPassword"=""
"ProxyTelnetCommand"="connect %host %port\\n"
"Environment"=""
"UserName"=""
"LocalUserName"=""
"NoPTY"=dword:00000001
"Compression"=dword:00000000
"TryAgent"=dword:00000001
"AgentFwd"=dword:00000000
"ChangeUsername"=dword:00000000
"Cipher"="aes,blowfish,3des,WARN,arcfour,des"
"KEX"="dh-gex-sha1,dh-group14-sha1,dh-group1-sha1,WARN"
"RekeyTime"=dword:0000003c
"RekeyBytes"="1G"
"SshNoAuth"=dword:00000000
"AuthTIS"=dword:00000000
"AuthKI"=dword:00000001
"SshNoShell"=dword:00000000
"SshProt"=dword:00000002
"SSH2DES"=dword:00000000
"PublicKeyFile"=""
"RemoteCommand"=""
"RFCEnviron"=dword:00000000
"PassiveTelnet"=dword:00000000
"BackspaceIsDelete"=dword:00000001
"RXVTHomeEnd"=dword:00000000
"LinuxFunctionKeys"=dword:00000000
"NoApplicationKeys"=dword:00000000
"NoApplicationCursors"=dword:00000000
"NoMouseReporting"=dword:00000000
"NoRemoteResize"=dword:00000000
"NoAltScreen"=dword:00000000
"NoRemoteWinTitle"=dword:00000000
"RemoteQTitleAction"=dword:00000001
"NoDBackspace"=dword:00000000
"NoRemoteCharset"=dword:00000000
"ApplicationCursorKeys"=dword:00000000
"ApplicationKeypad"=dword:00000000
"NetHackKeypad"=dword:00000000
"AltF4"=dword:00000001
"AltSpace"=dword:00000000
"AltOnly"=dword:00000000
"ComposeKey"=dword:00000000
"CtrlAltKeys"=dword:00000001
"TelnetKey"=dword:00000000
"TelnetRet"=dword:00000001
"LocalEcho"=dword:00000001
"LocalEdit"=dword:00000001
"Answerback"="PuTTY"
"AlwaysOnTop"=dword:00000000
"FullScreenOnAltEnter"=dword:00000000
"HideMousePtr"=dword:00000000
"SunkenEdge"=dword:00000000
"WindowBorder"=dword:00000001
"CurType"=dword:00000000
"BlinkCur"=dword:00000000
"Beep"=dword:00000001
"BeepInd"=dword:00000000
"BellWaveFile"=""
"BellOverload"=dword:00000001
"BellOverloadN"=dword:00000005
"BellOverloadT"=dword:000007d0
"BellOverloadS"=dword:00001388
"ScrollbackLines"=dword:000007d0
"DECOriginMode"=dword:00000000
"AutoWrapMode"=dword:00000001
"LFImpliesCR"=dword:00000000
"DisableArabicShaping"=dword:00000000
"DisableBidi"=dword:00000000
"WinNameAlways"=dword:00000001
"WinTitle"=""
"TermWidth"=dword:00000080
"TermHeight"=dword:00000030
"Font"="Courier New"
"FontIsBold"=dword:00000000
"FontCharSet"=dword:00000000
"FontHeight"=dword:0000000a
"FontQuality"=dword:00000000
"FontVTMode"=dword:00000004
"UseSystemColours"=dword:00000000
"TryPalette"=dword:00000000
"ANSIColour"=dword:00000001
"Xterm256Colour"=dword:00000001
"BoldAsColour"=dword:00000001
"Colour0"="0,255,0"
"Colour1"="255,255,255"
"Colour2"="0,0,0"
"Colour3"="85,85,85"
"Colour4"="0,0,0"
"Colour5"="0,255,0"
"Colour6"="0,0,0"
"Colour7"="85,85,85"
"Colour8"="187,0,0"
"Colour9"="255,85,85"
"Colour10"="0,187,0"
"Colour11"="85,255,85"
"Colour12"="187,187,0"
"Colour13"="255,255,85"
"Colour14"="0,0,187"
"Colour15"="85,85,255"
"Colour16"="187,0,187"
"Colour17"="255,85,255"
"Colour18"="0,187,187"
"Colour19"="85,255,255"
"Colour20"="187,187,187"
"Colour21"="255,255,255"
"RawCNP"=dword:00000000
"PasteRTF"=dword:00000000
"MouseIsXterm"=dword:00000000
"RectSelect"=dword:00000000
"MouseOverride"=dword:00000001
"Wordness0"="0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
"Wordness32"="0,1,2,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1"
"Wordness64"="1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2"
"Wordness96"="1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1"
"Wordness128"="1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1"
"Wordness160"="1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1"
"Wordness192"="2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2"
"Wordness224"="2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2"
"LineCodePage"=""
"CJKAmbigWide"=dword:00000000
"UTF8Override"=dword:00000001
"Printer"=""
"CapsLockCyr"=dword:00000000
"ScrollBar"=dword:00000001
"ScrollBarFullScreen"=dword:00000000
"ScrollOnKey"=dword:00000000
"ScrollOnDisp"=dword:00000001
"EraseToScrollback"=dword:00000001
"LockSize"=dword:00000000
"BCE"=dword:00000001
"BlinkText"=dword:00000000
"X11Forward"=dword:00000000
"X11Display"=""
"X11AuthType"=dword:00000001
"LocalPortAcceptAll"=dword:00000000
"RemotePortAcceptAll"=dword:00000000
"PortForwardings"=""
"BugIgnore1"=dword:00000000
"BugPlainPW1"=dword:00000000
"BugRSA1"=dword:00000000
"BugHMAC2"=dword:00000000
"BugDeriveKey2"=dword:00000000
"BugRSAPad2"=dword:00000000
"BugPKSessID2"=dword:00000000
"BugRekey2"=dword:00000000
"StampUtmp"=dword:00000001
"LoginShell"=dword:00000001
"ScrollbarOnLeft"=dword:00000000
"BoldFont"=""
"BoldFontIsBold"=dword:00334b28
"BoldFontCharSet"=dword:0046f79c
"BoldFontHeight"=dword:0012fa00
"WideFont"=""
"WideFontIsBold"=dword:0bd1a9ba
"WideFontCharSet"=dword:00334b28
"WideFontHeight"=dword:0012cc48
"WideBoldFont"=""
"WideBoldFontIsBold"=dword:0077654e
"WideBoldFontCharSet"=dword:0bd1a9ba
"WideBoldFontHeight"=dword:003a0178
"ShadowBold"=dword:00000000
"ShadowBoldOffset"=dword:00000001
"SerialLine"="COM1"
"SerialSpeed"=dword:00002580
"SerialDataBits"=dword:00000008
"SerialStopHalfbits"=dword:00000002
"SerialParity"=dword:00000000
"SerialFlowControl"=dword:00000001

Has anybody got an idea what the problem is with the above - do I need to change a \
setting or two?

I can of course implement OpenSSH as work around for the customer, but customer \
prefer PuTTY (for obvious reasons).

Kind regards,
Soren
--
View this message in context: \
http://www.nabble.com/Accessing-RLM-using-PuTTY-%28ssh%29-unresponsive-tp15975859p15975859.html
 Sent from the Network Appliance - Toasters mailing list archive at Nabble.com.


[prev in list] [next in list] [prev in thread] [next in thread]
Configure | About | News | Add a list | Sponsored by KoreLogic