[prev in list] [next in list] [prev in thread] [next in thread] 

List:       tcpdump-workers
Subject:    Re: [tcpdump-workers] help
From:       Juergen Schoenwaelder <schoenw () ibr ! cs ! tu-bs ! de>
Date:       2002-03-20 8:15:21
[Download RAW message or body]


>>>>> Mike Craik writes:

Mike> switchy#show mac-address-table
      
[...]

Mike> How you enumerate this information will depend on the make/model
Mike> of you switch.

You can also grab scli <http://www.ibr.cs.tu-bs.de/projects/scli/>
which supports the BRIDGE-MIB (which is supported by most bridges):

$ scli -c "show bridge forwarding" myswitch
 PORT STATUS   ADDRESS           NAME        VENDOR
    1 learned  00:04:dc:xx:xx:xx            
    1 learned  00:60:1d:xx:xx:xx foo
    1 learned  00:80:c8:xx:xx:xx bar
    2 learned  00:02:2d:xx:xx:xx 

Usually, the port number is the same as the interface number. There
are additional scli commands that let you dive deeper into the details
if you have to.

/js

-- 
Juergen Schoenwaelder    <http://www.informatik.uni-osnabrueck.de/schoenw/>


-
This is the TCPDUMP workers list. It is archived at
http://www.tcpdump.org/lists/workers/index.html
To unsubscribe use mailto:tcpdump-workers-request@tcpdump.org?body=unsubscribe
[prev in list] [next in list] [prev in thread] [next in thread]