[prev in list] [next in list] [prev in thread] [next in thread] List: syslog-ng Subject: Re: [syslog-ng] syslog-ng PID not getting set correctly From: "Ngim, Hyrum CTR ADCF/Arrowpoint" <hyrum.ngim.ctr () awps ! army ! mil> Date: 2009-04-30 14:56:40 Message-ID: 8B986F9B35D04C428A6B98996432C79B05ADE72D60 () fedmail01 ! fed ! awps ! army ! mil [Download RAW message or body] Sorry, the bug id I referenced was incorrect... https://bugzilla.balabit.com/show_bug.cgi?id=24 However, it's still not the same issue we are seeing.. :) From: syslog-ng-bounces@lists.balabit.hu [mailto:syslog-ng-bounces@lists.balabit.hu] \ On Behalf Of Ngim, Hyrum CTR ADCF/Arrowpoint Sent: Thursday, April 30, 2009 7:52 AM To: syslog-ng@lists.balabit.hu Subject: [syslog-ng] syslog-ng PID not getting set correctly We are running the sunfreeware 3.0.1 version of syslog-ng. I'm noticing that the PID is not being set correctly. I saw a bug report but it's not \ the same as what I'm seeing: https://bugzilla.balabit.com/show_bug.cgi?id=23 Here is what I am experiencing: # ps -ef | grep syslog root 1662 1 0 07:42:05 ? 0:00 /usr/local/sbin/syslog-ng root 1663 1662 0 07:42:05 ? 0:00 /usr/local/sbin/syslog-ng # cat /var/run/syslog-ng.pid 1663 Shouldn't the PID be 1662? I've also seen inconsistencies when I use the svcadm commands to \ disable/enable/refresh the syslog-ng service. Many times it won't stop the service \ properly and the /var/run/syslog-ng.pid file remains in /var/run. When I try to \ restart syslog-ng, it won't restart until I run an svcadm disable syslog-ng, remove \ the /var/run/syslog-ng.pid file, then run svcadm enable syslog-ng. Thanks In Advance for any help. ["winmail.dat" (winmail.dat)] x>"6 ! 5992328842078F49A67F485BA104A95C 8 ( t \ 8 ) u IPM.Note.SMIME.MultipartSigned , RE: \ syslog-ng PID not getting set \ correctly w " N I <8B986F9B35D04C428A6B98996432C79B05ADE72D60@fedmail01.fed.awps.army.mil>